Archive for the ‘Uncategorized’ Category
Tuesday, July 15th, 2014
Dassault Systemes announced this week that it has acquired simulation technology provider SIMPACK in an all cash deal. The transaction was completed on July 10, 2014. Not surprisingly, financial details of the deal were not revealed.
With the acquisition of Munich-based SIMPACK, Dassault continues to expand its multiphysics simulation technology portfolio to include multi-body mechatronic systems.
SIMPACK has more than 130 customers in the energy, transportation (primarily automotive and rail), and biomedical industries, including Alstom, Bombardier, BMW, Daimler, Honda, Jaguar Land Rover, MAN, and Vestas.
SIMPACK Multibody Simulation (MBS) – Engine Chain
(more…)
Tags: analysis, CAE, CATIA, Dassault Systemes, DS, SIMPACK, simulation, SIMULIA, SolidWorks
1 Comment »
Wednesday, July 9th, 2014
Is 3D printing truly the miracle it’s purported to be?
That’s a question I’ve asked myself numerous times, especially when I see yet another announcement from a hardware or software vendor or service provider that is often hype and little else. A lot of companies (and their marketing/PR/communications engines) count on the fact that just about anything that states or implies “3D printing” is going to automatically generate “a buzz” of notoriety, and maybe even some venture capital.
On one hand, yes, 3D printing has shown great promise and results. But, on the other, it’s largely wait and see.
Many have been lured into the promise of 3D printing with sensationalistic demonstrations as shown in the following video.
3D Printing: Make Anything You Want
(more…)
Tags: 3D printer, 3D printing, graphene, graphic design, nano, product design, Wohlers Report
3 Comments »
Tuesday, July 1st, 2014
Editor’s Note: This is the fourth installment of a series of four evaluation articles of CAD/PDM systems for SMBs.
Overview
PTC Windchill PDM Essentials is intended to bring collaborative engineering to smaller companies for organizing and managing product content so that they can improve design reuse, broaden access to product information across roles, and ensure control over design versions and release processes.
PDM Essentials is basically a role-based, template-based, pre-configured bundle in an optimized Microsoft Windows environment.
PTC Windchill PDM Essentials is a scaled-down version of PDMLink, Windchill’s primary data management solution, allowing smaller firms to manage CAD data and product development-related Microsoft Office documents.
Windchill PDM Essentials Quick Tour Video
(more…)
Tags: Microsoft SQL Server, PDM, product data management, PTC, PTC Creo Parametric, PTC Windchill PDM Essentials
No Comments »
Friday, June 27th, 2014
During the course of a year I get the opportunity to attend several events and meet a lot of new people involved with various aspects of design, engineering, and manufacturing. This week I attended an event called “3D Printing Day @ CSU.” Held on the campus of Colorado State University, it showcased the Idea-2-Product Laboratory, the brainchild of its director, and our good friend, Dr. David Prawel. It was a combination seminar series and tours of the Lab where a number of 3D printers were demonstrated.
One of the most interesting and compelling seminar talks was given by Easton LaChappelle, a 17-year-old from Mancos, CO who graduated from high school last month. His talk was on his experience with 3D printing, prosthetics, and telerobotics
Easton LaChappelle – Montage
(more…)
Tags: 3D printing, CSU, David Prawel, Easton LaChappelle, I2P, Idea-2-Product Laboratory, prosthetics, robotics, TEDxMileHigh, telerobotics
1 Comment »
Tuesday, June 24th, 2014
For a truly unique spin on solving an age-old problem, Dassault Systemes recently unveiled the first 3D realistic simulation model of an entire human heart. Developed with a multidisciplinary team of heart experts to help combat cardiovascular disease, the Living Heart Project is launching the next frontier in diagnosing, treating, and preventing heart conditions through personalized, 3D virtual models.
The Living Heart project, launched in January 2014, unites cardiovascular researchers and educators with medical device manufacturers, regulatory agencies, and practicing cardiologists on a shared mission to develop and validate personalized digital human heart models and establish a unified foundation for cardiovascular in silico medicine. These models can serve as a core technology base for education and training, medical device design, testing and regulatory science—thereby creating a path for rapidly translating cutting edge innovations into improved patient care.
At the center of the project is a 3D heart model powered by SIMULIA applications to develop a comprehensive 3D heart model, capturing the electrical, mechanical, and fluid behavior of the heart in a realistic way. Other DS products used for the project included SolidWorks for modeling the heart and 3DVIA was used for animations and demonstrations.
SIMULIA Introduces the Living Heart Project
(more…)
Tags: 3D EXPERIENCE, cardiovascular, Dassault Systemes, human heart, Living Heart Project, SIMULIA
No Comments »
Thursday, June 19th, 2014
Along with over 2,000 other attendees, we just returned from the PTC Live Global 2014 conference and exhibition in Boston. It was a very good show at a very good venue — the Boston Convention Center.
The two biggest things we noted at the conference were PTC’s involvment and commitment to the Internet of Things (IoT) and the introduction of PTC Creo 3.0. We also noted a more upbeat crowd attending the show this year than in years past. The attendees we spoke with said the lighter attitude was due to PTC’s announcements, PTC’s corporate direction, and an economy that continues to slowly improve.
PTC Technology Update – PTC Live Global 2014 Keynote
(more…)
Tags: CAD, Creo 3.0, Internet of Things, IoT, Mike Campbell, PLM, PTC, PTC Live Global 2014, ThingWorx
No Comments »
Friday, June 13th, 2014
Editor’s Note: This is the third installment of a series of four evaluation articles of CAD/PDM systems for SMBs.
Overview
Siemens’s Teamcenter Rapid Start is a product data management (PDM) solution that is preconfigured, yet extensible. As a preconfigured deployment option of Teamcenter, it is intended to address the most common PDM needs of SMBs. With its “simplified” installation process, Teamcenter Rapid Start applies preconfigured best practices to common engineering tasks and processes for SMBs.
In a stand-alone environment, all server and all client applications are installed on each machine. In a shared environment, server applications are installed on a single server. Each machine has network access to the server and has only the client applications installed.
The video that follows shows how to get started with Teamcenter Rapid Start PDM, and includes demos on CAD data management, document management, and process management.
Teamcenter Rapid Start
(more…)
Tags: CAD, PDM, product data management, Siemens PLM Software, Solid Edge, Teamcenter Rapid Start
No Comments »
Wednesday, June 11th, 2014
I’m in Detroit this week attending the RAPID Conference & Exhibition produced by the Society of Manufacturing Engineers (SME). The RAPID conference was co-located as part of a bigger event called the Big M — Manufacturing Convergence. The overall theme of the manufacturing event is “Shaping the Future of Manufacturing.” This theme was especially appropriate for RAPID and its focus on 3D printing and scanning.
This is the best attended RAPID event ever with well over 2,500 attendees from 27 countries.
I’ve seen a number of interesting things on the exhibit floor, but have been most intrigued by a new emerging class of hybrid 3D printers that employ both additive manufacturing (AM) and subtractive (conventional machining) methods. Some of the hybrid 3D printers included the following:
Hybrid (Additive & Subtractive Manufacturing) Machine by DMG Mori
(more…)
Tags: AM, AMBIT, CGI, DMG Mori, Hybrid manufacturing, Hybrid Manufacturing Technologies, Laser Tec 65, LENS Print Engine, OPTOMEC
No Comments »
Wednesday, June 4th, 2014
Last week I attended the 11th 3D Collaboration & Interoperability Congress (3DCIC) 2014 as one of the event’s media sponsors. It focused on promoting and improving collaboration and data interoperability throughout the product lifecycle.
Ted Hall, the presenter of the Day 1 3DCIC Keynote Speech is also the inventor of ShopBot desktop CNC machine
(more…)
Tags: 3DCIC 2014
No Comments »
Monday, June 2nd, 2014
Last week I attended the 11th 3D Collaboration & Interoperability Congress (3DCIC) in Colorado Springs, CO as one of the event’s media sponsors. The three-day event focused on promoting and improving collaboration and data interoperability throughout the product lifecycle — from concept through retirement.
For the first time this year, NAFEMS (the international association of the engineering modeling, analysis, and simulation community) held its fourth NAFEMS Americas conference, co-locating and coinciding with 3DCIC 2014.
CIC distinguishes itself by being a vendor-neutral event that addresses collaboration and interoperability across several industries for product development, simulation/analysis, manufacturing, and overall business purposes.
The theme of 3DCIC 2014, which attracted more than 250 attendees, was “Driving Product Development with Collaboration, Simulation, and Integration.” Progressive organizations have realized that the integration of design, analysis/simulation, manufacturing, downstream processes, and the supply chain are vital components for keeping them competitive and profitable. It’s really the underlying basis of the sought-after nirvana of PLM. This was also the focus of 3DCIC 2014 – the notion that collaboration is totally dependent on interoperability between disparate groups and processes.
Although it was challenging to carve away time during the conference, I was able to sit down with David Prawel, Founder and President of Longview Advisors and 3DCIC for his take on the conference, as well as the current state of collaboration and interoperability.
 David Prawel, Founder and President of 3DCIC (more…)
Tags: 3DCIC 2014, Collaoboration, CSU, David Prawel, I2P, Idea-2-Product Lab, interoperability, Longview Advisors
No Comments »
|
