The 3D printing process and the notion of a 3D printer in every home has received a lot of attention the past few years, and sales of relatively low cost 3D printers have skyrocketed. That is, until recently. According to the Wohlers Report, sales of 3D printers started to decline last year and have continued to accelerate downward this year.
But why, for a process and capability that was supposed to be ubiquitous and necessary for every home? The machines may be relatively inexpensive, but how many parts are you truly going to want to ultimately design and produce? Then there are material, size/volume, and physical characteristic, and quality limitations. The machines can also be fickle to set up and maintain. I suspect that after an initial period of excitement and promise, a lot of early-purchase 3D printers are now sitting idle and collecting dust.
It brings to mind people who have the joy and burden of owning multiple homes. A second home may be nice, but that ends up being the only place you end up going. Most acquaintances that I have known dealing with this issue inevitably as themselves, “Why own when you can rent.” I’m starting to see this same mindset enter into the psyches of early purchasers of 3D printers.
That mindset has produced a possible opportunity for easily “renting” a 3D printer at a location as close as your local Staples or UPS store.
A few months ago, ago, office supply retail giant, Staples, announced that they had opened their first 3D printing “Experience Centre” in the Netherlands. Staples selected Mcor’s paper-based Selective Deposition Lamination (SDL) 3D printing technology, exclusively for this service, citing Mcor’s relative low cost and color capability.
This announcement followed Staples’ announcement last November that they were launching “Easy 3D,” an online and in-store 3D printing service. Together, these two 3D printing endeavors will (hopefully) fulfill Staples’ goal to provide comprehensive 3D printing services for its customers.
3D Printing at Staples in the Netherlands
Last week, Stratasys announced that it had been selected by The UPS Store to provide its 3D printing systems to The UPS Store as part of a test program. This service will enable UPS Store customers to have their 3D design 3D printed on-site.
The UPS Store is installing Stratasys uPrint SE Plus 3D Printers in six test locations, beginning in San Diego. The test is a collaborative effort by Stratasys and The UPS Store to make 3D printing more accessible as awareness of the technology and its capabilities grow. Following the test launch, retail customers will be able to bring CAD files to participating UPS Store locations and have their 3D design printed.
The UPS Store 3D Printing Experience
How well trained 3D printing technicians will be at Staples and UPS stores and how they will resolve problematic issues that are bound to come up remains to be seen. But, you’ve got to start somewhere . . .
So, will fans and proponents of 3D printing quit buying and start renting? If the successes of other online 3D printing “rental” services, such as RedEye, Shapeways, and i.Materialise are any indication, then there just might be a place for “walk-up” 3D printing at Staples and UPS stores.
