Atmel's 6-Channel Touch Controller With Integral LED Driver Adds Reliability and Cuts Component Count

Guard channel feature and low voltage operation makes device ideal for portable products

SOUTHAMPTON, England, Sept. 15 /PRNewswire/ -- Atmel(C) Corporation (NASDAQ: ATML) announced today the AT42QT1060, a touch control chip that integrates 6 channels of touch sensing with the ability to drive up to 7 low current LEDs directly through a pulse width modulated (PWM) output function. The device operates from 5.5VDC down to 1.8VDC and consumes less than 1uA in standby mode to give long battery life; it comes in a tiny 4mm x 4mm MLF28 package, making it ideal for use in mobile phones and other handheld devices. The AT42QT1060 is the latest addition to Atmel's comprehensive range of capacitive touch controllers based on Quantum Research Group's charge-transfer technology. These include QTouch(TM) and QMatrix(TM) based controllers for single and multiple touch buttons, touch sliders and touch wheels.

The AT42QT1060 is designed for use in portable electronics products. An inbuilt capacitive guard channel feature helps prevent false triggering, for example, where moisture is an issue. This feature also prevents against erroneous commands that can occur when devices such as MP3 players are carried in a pocket, or in the case of a cellular phone, when it is held against the ear. The highly integrated AT42QT1060 reduces component count, cutting design complexity and cost, and enabling faster product development.

The sensor chip is based on Quantum's patented QTouch(TM) charge-transfer sensing method. This robust technology uses spread-spectrum modulation to achieve high immunity to electrical noise and a patented technique -- Adjacent Key Suppression(TM) (AKS(TM)) -- ensures that only the intended key is activated by the touch of a finger. The guard channel feature uses AKS(TM) to eliminate false triggering of nearby keys. Long-term reliability is ensured because the device automatically re-calibrates on power-up, compensating for build-up of moisture or other contaminants on the touch surface. Individual key sensitivity is host-selectable.

A host wake up function allows the host to sleep and be woken up when a user triggers the corresponding input, providing another power-saving feature. Additional GPIO expansion can be achieved by the use of spare IC pins.

The AT42QT1060 functions through any insulating panel including glass or plastic up to 3mm thick. Electrodes can be made from copper, silver, carbon, indium tin oxide (ITO) or Orgacon conductive ink and must be 6 x 6mm or larger. Widely different electrode sizes and shapes are possible, giving the product designer great flexibility in tailoring the user interface.

Availability and Pricing

Samples of the AT42QT1060 are available now in a space-saving 4mm x 4mm package. The device is priced at $0.89 in quantities of 100,000 units per year. A demonstration board is also available.

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

With its new touch technology division, formerly known as Quantum Research Group, the company now offers dedicated touch sense controllers addressing applications in the mobile communication and entertainment markets as well as in PC, appliances and automotive applications.

(C) 2008 Atmel Corporation. All Rights Reserved. Atmel(R), logo and combinations thereof, and others, are registered trademarks, QTouch(TM), QMatrix(TM), AKS(TM) and others are trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Information:

For further details about this and other Atmel touch sense products, please visit http://www.qprox.com.

     Press Contacts:
     Stephan Thaler, Marketing Director - Touch technology division
     Tel: (+44) 23 8056 5604, Email: Stephan.thaler@atmel.com

     Philippe Faure, Marketing Communications Director - Microcontrollers
     Tel: (+33) 2 40 18 18 87, Email: philippe.faure@atmel.com

     Helen Perlegos, Public Relations
     Tel: (+1) 408 487-2963, Email: hperlegos@atmel.com

     Robert Huntley,  (PR agency)
     Tel: (+44) 1225 470000, Email: robert.huntley@publitek.com

Web site: http://www.atmel.com/




Review Article Be the first to review this article
Rand3D

IMTS 2018 Register Now>>

Featured Video
Jobs
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Inside 3D Printing Seoul 2018 at Korea International Exhibition Center (KINTEX), Hall 5 408 Hallyuworld-ro, Ilsanseo-gu, Goyang-si, Gyeonggi-do Goyang Korea (South) - Jun 27 - 29, 2018
AMTEX 2018 at Pragati Maidan New Delhi India - Jul 6 - 9, 2018
34th Annual Coordinate Metrology Society Conference 2018 at Grand Sierra Resort, 2500 East Second Street Meeting & Covention Center Reno NV - Jul 23 - 27, 2018
Kenesto: 30 day trial
SolidCAM: Break the Chains



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise