SAE International Issues Four New Aerospace Additive Manufacturing Technical Standards

SAE International announces the release of its first suite of Aerospace Material Specifications (AMS) additive manufacturing materials and process specifications which will support the certification of aircraft and spacecraft critical parts by providing a framework to protect the integrity of material property data and provide traceability within the aerospace supply chain.

WARRENDALE, Pa., June 12, 2018 — (PRNewswire) —

WARRENDALE, Pa., June 12, 2018 /PRNewswire-PRWeb/ -- SAE International announces the release of its first suite of Aerospace Material Specifications (AMS) additive manufacturing materials and process specifications which will support the certification of aircraft and spacecraft critical parts by providing a framework to protect the integrity of material property data and provide traceability within the aerospace supply chain.

The four new standards are:

  •      AMS7000: Laser-Powder Bed Fusion (L-PBF) Produced Parts, Nickel Alloy, Corrosion and Heat-Resistant, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb Stress Relieved, Hot Isostatic Pressed and Solution Annealed
  •      AMS7001: Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb
  •      AMS7002: Process Requirements for Production of Metal Powder Feedstock for Use in Additive Manufacturing of Aerospace Parts
  •      AMS7003: Laser Powder Bed Fusion Process

"Given that advanced materials and advanced manufacturing are strategic focus areas for SAE International, we are committed to supporting the aerospace industry's adoption of additive manufacturing technologies. Tremendous effort was expended by industry and regulatory stakeholders from North America, Europe and beyond to develop this initial suite of material and process specifications which help address the regulatory authorities' request for guidance material for this emerging technology," David Alexander - Director, Aerospace Standards - SAE International, said.

"SAE looks forward to assisting with the migration from point design to material qualification by continuing to develop additive manufacturing aerospace material and process documents containing statistically validated specification minimum values," he added.

Supported by a Federal Aviation Administration tasking letter to assist regulatory authorities in developing guidance materials for additive manufacturing (AM) certification and established in 2015, SAE International's AMS-AM, Additive Manufacturing Committee, will continue to develop AMS specifications for metal and polymer AM to support the needs of the aerospace industry. Over 350 global participants from more than 15 countries representing aircraft, spacecraft, and engine OEMs, material suppliers, operators, equipment/system suppliers, service providers, regulatory authorities, and defense agencies are active in the committee.

AM is a process that offers many benefits over conventional manufacturing methods for aircraft components due to its ability to reduce weight and production costs, manufacture at high speeds with great accuracy and decrease constraints of the existing supply chain.

To learn more about SAE International aerospace standards, visit https://www.sae.org/standards.

SAE International is a global association committed to being the ultimate knowledge source for the engineering profession. By uniting over 127,000 engineers and technical experts, we drive knowledge and expertise across a broad spectrum of industries. We act on two priorities: encouraging a lifetime of learning for mobility engineering professionals and setting the standards for industry engineering. We strive for a better world through the work of our philanthropic SAE Foundation, including programs like A World in Motion® and the Collegiate Design Series™.

http://www.sae.org

 

SOURCE Sae International

Contact:
Company Name: Sae International
Web: http://www.sae.org




Review Article Be the first to review this article
Rand3D

SolidCAM - Break The Chains

Featured Video
Jobs
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Upcoming Events
Inside 3D Printing Seoul 2018 at Korea International Exhibition Center (KINTEX), Hall 5 408 Hallyuworld-ro, Ilsanseo-gu, Goyang-si, Gyeonggi-do Goyang Korea (South) - Jun 27 - 29, 2018
AMTEX 2018 at Pragati Maidan New Delhi India - Jul 6 - 9, 2018
34th Annual Coordinate Metrology Society Conference 2018 at Grand Sierra Resort, 2500 East Second Street Meeting & Covention Center Reno NV - Jul 23 - 27, 2018
Kenesto: 30 day trial



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise