WHITE HOUSE, Tennessee, October 24, 2016 – Striker Systems is pleased to announce advanced support for the Mate EasySnap™ tool in its latest STRIKER CAD/CAM software.
The Mate EasySnap™ is a unique technology for part retention and separation in CNC punching operations. It differs from conventional micro-joint tools in that it does not leave a connecting tab. Instead, the tool creates a line of weakness (snap line) in both surfaces of the sheet metal. This allows parts to be snapped free simply by bending along the snap line. The EasySnap™ lends itself to scrapless part retention and often eliminates secondary deburring operations.
During programming, the part retention technology of the EasySnap™ requires tool placement that differs from conventional micro-joint tools. Rather than placing two tool hits with the desired tab width between as is typical with a micro-joint tool, a single tool hit of the Mate EasySnap™ can be used. STRIKER CAD/CAM software places the EasySnap™ automatically on a per-part basis or across an entire nested sheet, or interactively allowing the programmer to pick the desired EasySnap™ locations.
“Striker Systems is a very market driven software company”, states Michael Boggs, Striker Systems VP of Sales. “As our customers incorporate technology into their punching operations, we will continually work to automate their programming process. Advancing our support for the Mate EasySnap™ demonstrates our commitment to providing the most automated CNC punch programming software available.”
Striker Systems - EasySnap™ programming: https://youtu.be/8A5Nlmvusx4
Mate Precision Tooling – EasySnap™ animation: https://www.youtube.com/watch?v=b5zu_Az4x10
About Striker Systems
Striker Systems is a world leader in the development of CAD/CAM and nesting software for the sheet metal fabrication industry. For additional information about Striker Systems sheet metal CAD/CAM and nesting software solutions, please visit the Striker Systems web site at www.StrikerSystems.com or call Striker Systems at 800-950-7862.
About Mate Precision Tooling
Mate Precision Tooling is the leading manufacturer of original and replacement tooling for Amada, Euromac, LVD-Strippit, PrimaPower and Trumpf punch presses. For additional information about the Mate EasySnap™ or any of the Mate Precision Tooling products, please visit the Mate Precision Tooling web site at www.Mate.com or call Mate Precision Tooling at 800-328-4492.
Striker Systems is a registered trademark of Striker Systems, Division of Computer Design, Inc.
© 2016 Computer Design, Inc. All rights reserved.