DI2CM – 12 years a slave… master

Digital Core Design, IP Core provider and a System-on-Chip design laboratories from Poland, introduced soft IP Core, targeting I2C design needs. The DI2CM core provides an interface between a microprocessor or microcontroller and the I2C bus. It can work as a master transmitter or master receiver - depending on a working mode, determined by the microcontroller. This universal solution is available with various system interface wrappers like AMBA - APB Bus, Altera Avalon Bus, Xilinx OPB Bus.

Poland, Bytom, 5th of March 2015.  Saying that the I2C is a two-wire, bi-directional serial bus, which provides simple and efficient method of short distance data transmission between many devices, is quite obvious. But still, reality shows that the I2C bus can be very confusing, and not only for the newcomers.

The DI2CM core provides an interface between a microprocessor or microcontroller and the I2C bus. It can work as a master transmitter or a  master receiver. It only depends on a working mode, determined by the microprocessor or microcontroller. - The DI2CM core incorporates all features required by the latest I2C specification – explains Piotr Kandora, R&D Director at Digital Core Design – this includes clock synchronization, clock stretch, arbitration, multi-master systems and high-speed transmission mode. The DI2CM IP Core has also been equipped with built-in timer, which allows operation for a wide range of clk frequencies.

DCD’s latest solution is a technology independent design, that’s why like all other company’s IP Cores, it can be implemented in a variety of process technologies.

More information: http://dcd.pl/ipcore/118/di2cm/

Key Features

  • Conforms to the latest I2C specification
  • Master operation
    • Master transmitter
    • Master receiver
  • Support for all transmission speeds
    • Standard (up to 100 kb/s)
    • Fast (up to 400 kb/s)
    • Fast Plus (up to 1 Mb/s)
    • High Speed (up to 3,4 Mb/s)
  • Arbitration and clock synchronization
  • Support for multi-master systems
  • Support for both 7-bit and 10-bit addressing formats on the I2C bus
  • Interrupt generation
  • Build-in 8-bit timer for data transfers speed adjusting
  • Host side interface dedicated for microprocessors/microcontrollers
  • User-defined timing (data setup, start setup, start hold, etc.)
  • Available system interface wrappers:
    • AMBA - APB Bus
    • Altera Avalon Bus
    • Xilinx OPB Bus
  • Fully synthesizable
  • Static synchronous design
  • Positive edge clocking and no internal tri-states
  • Scan test ready

Information about Digital Core Design:

The company founded in 1999, since the beginning stands in the forefront of the IP Core market. High specialization and profound customer service enabled to introduce more than 70 different architectures. Among them is the world’s fastest 8051 IP Core, the DQ80251, which is more than 66 times faster than the standard solution. As an effect, over 300 hundred licensees have been sold to more than 500 companies worldwide. Among them are the biggest enterprises like e.g. Sony, Siemens, General Electric and Toyota. But a lot of DCD’s customers are small businesses, R&D laboratories or front/back end offices, which require exact solution tailored to their project needs. Rough estimations say that more than 270 000 000 devices around the globe have been based on Digital Core Design’s IP Cores.

 

Contact:

Tomeq Cwienk,
Digital Core Design,
ul. Wroclawska 94, 41-902 Bytom, Poland
tel: + 48 32 282 82 66 ext.25,
skype: tomasz.cwienk,
mail to: Email Contact




Review Article Be the first to review this article
SolidCAM - SolidCAM SEE IT LIVE

Featured Video
Jobs
System Designer/Engineer for Bluewater at Southfield, Michigan
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Upcoming Events
Montréal Manufacturing Technology Show (MMTS) 2018 at Place Bonaventure Montréal Canada - May 14 - 16, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise