Mentor Graphics and AT&S Announce Embedded Component Package (ECP) Technology Partnership to Optimize PCB Design-Through-Manufacturing Flow

WILSONVILLE, Ore. — (BUSINESS WIRE) — May 24, 2012 — Mentor Graphics Corporation (NASDAQ: MENT), the market and technology leader in printed circuit board (PCB) design solutions, today announced the technology collaboration with the AT&S (Austria Technologie & Systemtechnik) Embedded Component Package (ECP®) process for Mentor Graphics® PCB design-through-manufacturing flow. AT&S’ advanced ECP technology for microelectronic component packaging leverages embedded bare die and discrete passives into the core of a PCB, reducing the package form factor by 30-50% for improved functionality and system performance. Now, with the Mentor® Expedition® Enterprise flow, designers are able to implement AT&S’s advanced technology on their PCB cores up to 40% faster and with improved quality than with previous design tools. As a result, PCB designers using ECP technology will realize improved electrical performance, thermal management, miniaturization, cost efficiency and overall product quality, with significant time reduction.

AT&S has worked with Mentor Graphics to develop a streamlined design workflow for embedded active components into the core of a PCB. This is an emerging technology that has drawn great interest from semiconductor companies. Since embedding active components is relatively new to PCB and package design, it does present challenges to the traditional design flow. As well, Mentor provides a complete PCB design-through-manufacturing flow with its integrated Valor® manufacturing and assembly software tools.

“Our ECP technology addresses the complexities of today’s embedded systems and is currently being adopted by major silicon vendors in the mobile handset market,” said Mark Beesley, COO of Advanced Packaging, AT&S. “Mentor is the global leader in PCB design software so the integration of our ECP technology process with Mentor’s design-through-manufacturing flow provides an optimum solution for our mutual systems design customers.”

Mentor and AT&S have found dramatic time savings using Mentor Graphics PCB design tools with the ECP technology. A recent design project comprised a complex package module with two embedded flip-chip die and, on top of the substrate, a stacked die along with another flip-chip die. This would normally require ten working days to setup, design and output for manufacturing. However, using the Mentor-AT&S integrated technology, product development was achieved in just six days; this also enabled the inclusion of thermal vias using the Mentor FloTHERM® tool for thermal analysis.

“Mentor is the first company to fully integrate the ECP technology within its design-through-manufacturing flow, making this solution accessible to our global customers,” stated Henry Potts, vice president of Mentor Graphics Systems Design Division. “Our mission is to provide advanced, seamless software tools and services to help our mutual customers develop innovative, profitable products in today’s competitive global economy – from PCB design through fabrication and assembly.”

The Mentor Graphics Expedition Enterprise platform with the ECP technology will be released later this year. More product details can be found on the company website:

Mentor and AT&S Co-Presentation at DAC 2012

Mentor Graphics and AT&S will present a User Track session, “Embedding Bare Die and Discrete Passives in an Organic Substrate Package: Design, Assembly and Fabrication Challenges,” at the Design Automation Conference (DAC) 2012 in San Francisco on Wednesday, June 6 at 9:00 a.m.-10:30 a.m. in room 105, DAC Exhibition Hall. To register, go to: A special 50-minute session on this topic will also be presented by Charles Pfeil (Mentor Graphics) and Nicolas Faust (AT&S) in the Mentor Graphics booth #1530 at 2:00 p.m. on June 6. To register, go to:

About AT&S

Formed in 1987, AT&S today ranks among the largest manufacturers of printed circuit boards in Europe and Asia. AT&S is extremely well positioned in the market for high-tech HDI microvia printed circuit boards, which are chiefly used in mobile devices. The company is also highly successful in the automotive, industrial, and medical sectors. The Group employs more than 7,500 people worldwide. For more information, visit

About Mentor Graphics

Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year of about $1,015 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site:

(Mentor Graphics, Mentor, Expedition, Valor and FloTHERM are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.)


Mentor Graphics
Larry Toda, 503-685-1664
Email Contact
Suzanne Graham, 503-685-7789
Email Contact

Review Article Be the first to review this article


Featured Video
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
System Designer/Engineer for Bluewater at Southfield, Michigan
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Specifications Consultant for Avitru at Nationwide, Georgia
Senior Structural Engineer for Wiss,Janney, Estner Assoicates, Inc at houston, Texas
Upcoming Events
ACE 2018 Conference at The Westin Indianapolis 241 W Washington St Indianapolis IN - Mar 20 - 22, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise