Autodesk University (AU) is the annual user conference & exhibition for Autodesk, Inc, the world leader in 2D and 3D design software for the manufacturing, building and construction, and media and entertainment markets. The custom chopper was unveiled during the AU Design Innovation welcome presentation. The purpose of the session is to give engineers and designers a compelling glimpse of the future of design innovation and see some of the technologies that are changing the way design is done across the world.
During the welcome presentation, Autodesk featured on large-screen monitors a contiguous process showing the timeline from initial concept through design, to rendering, ultimately leading to physical design verification in the form of a true full-scale Fused Deposition Modeling (FDM) prototype chopper, which was lowered from the ceiling on cables. Autodesk celebrated this achievement with an announcement that it is now possible to generate 3D prints like the motorcycle directly from within AutoCAD, one of the world’s leading design and documentation platforms. This web service links to RedEye over the web, allowing prints to be created then sent back to the AutoCAD user.
“The audience was awestruck during the presentation by first viewing the initial model and rendering on a large screen to seconds later watching the full-scale prototype slowly emerge from stories above,” says Stratasys CEO Scott Crump.
The prototype chopper included many fully functional parts, including: articulating steering, illuminating headlights, and rotating wheels, demonstrating how the FDM process can give designers the functionality they look for in quality production parts. Built using ABS M30 high–strength, production-grade thermoplastic, the chopper components were tough enough to suspend the bike from two stories above. Furthermore, the chopper’s exterior vibrantly displayed the designer’s true vision of color for each part.
“It’s easy for RedEye to build accurate, large-scale prototypes like this because it employs 100 additive fabrication systems in its facilities — more than any other service bureau worldwide,” says Crump. “We’re proud to be a part of this project that showcases our technology to designers and engineers worldwide.”
RedEye by Stratasys, Inc., is the leading digital manufacturing provider of prototypes and production parts worldwide. With 100 systems in its centers, RedEye builds functional models and low-volume production parts made from thermoplastic materials, such as ABS, polycarbonate, ISO-certified PC and a high heat and chemical resistant polyphenylsulfone. From digital 3D CAD files, RedEye builds durable, functional and repeatable models and parts. For instant online quoting or more information, visit www.redeyeondemand.com.
Stratasys Inc., Minneapolis, manufactures office-based rapid prototyping and direct digital manufacturing systems, 3D printers and offers rapid prototyping and manufacturing parts services. According to Wohlers Report 2008, Stratasys supplied 44 percent of all systems installed worldwide in 2007, making it the unit market leader, for the sixth consecutive year. Stratasys developed the rapid prototyping process known as fused deposition modeling (FDM). The process creates functional models and end-use parts directly from any 3D CAD program using ABS plastic, polycarbonate, PPSF, and blends. The company holds over 180 granted or pending rapid prototyping patents globally. Stratasys products are used in the aerospace, defense, automotive, medical, education, electronic, architecture and consumer product industries. On the Web: www.Stratasys.com.
RedEye is a trademark, and Fused Deposition Modeling and FDM are registered trademarks of Stratasys, Inc.
Forward Looking Statements
All statements herein that are not historical facts or that include such words as “expects”, “anticipates”, “projects”, “estimates”, “vision”, “planning” or “believes” or similar words are forward-looking statements that we deem to be covered by and to qualify for the safe harbor protection covered by the Private Securities Litigation Reform Act of 1995. Our belief that we have the largest part-building service is based on the number of dedicated machines. Except for the historical information herein, the matters discussed in this news release are forward-looking statements that involve risks and uncertainties; these include the continued market acceptance and growth of our Dimension TM 3D printer and our FDM 200mcTM , 360mcTM , 400mcTM , 900mcTM, MaxumTM, TitanTM, and VantageTM productivity lines; the size of the 3D printing market; our ability to penetrate the 3D printing market; our ability to maintain the growth rates experienced in this and preceding quarters; our ability to introduce and market new materials such as ABS-Plus and ABS-M30; and the market acceptance of these and other materials; the impact of competitive products and pricing; the timely development and acceptance of new products and materials; the success of our recent R&D initiative to expand the direct digital manufacturing capabilities of our core FDM technology; the success of our RedEyeRPMTM and other paid parts services; and the other risks detailed from time to time in our SEC Reports, including the our quarterly reports filed on Form 10-Q throughout 2008; and our annual report on Form 10-K filed for the year ended December 31, 2007.
Contact:
RedEye
Ruth Jacques, 952-294-3420
Senior Marketing
Specialist
Email Contact
or
Investor
Contact:
Stratasys, Inc.
Shane Glenn, 952-294-3416
Email Contact