>> MCAD User News and Reviews
Thread views: 383717 View all threadsNext thread*

10/06/06 09:01 AM
Re: INSPECTION [re: Norm]Report this article as Inappropriate to us !!!Login to Reply


Actually your example proves my point. With a drawing you need nothing but The ABILITY TO READ A DRAWING. With your concept you need a computer, software to see the part, understanding of the software, time to verify the dimension, an environment that is conducive to computers. Where is the time saved? I really don’t think you have been around the block in the dark.

But that is not the only reason for the drawing.
Design Review (nothing makes you realize how a part should be made like a good detailed drawing)

Most parts are outsourced and that is where the problems start. I have done drawings for two suppliers that have needed inspection drawings created from limited dimensioned parts. Since I am a skilled Design Drafter, my future looks good.

130 parts from UG
2 small assemblies from Catia. (They do a drawing for every part they receive)

I am going to find out from my Boeing contacts how it is working inside the company.

I know it is a definite problem with the suppliers. But then it maybe just a learning curve they have to get past.

It would be nice to have you explain the new engineering design cycle how all of the above steps are done, especially when outside sources are used since you seem to be the GURU.

In fact, why don’t you describe how the outside source would do this?

Of course none of these folks have UG, Catia, Pro/E.

I am looking forward to your example and instructions.


Entire thread
SubjectPosted byPosted on
*Increase Solid Model Value with 3D GD&T  08/08/06 04:21 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/19/07 05:38 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   12/21/07 07:01 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/22/07 08:07 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   01/03/08 06:54 AM
.*InspectionJohnny On The Spot  02/20/07 04:47 PM
.*Re: Inspection NormCrawford   02/22/07 04:58 AM
.*Re: Inspection brian575   03/16/07 12:42 PM
.*Re: enjoyed the article NormCrawford   03/21/07 08:03 AM
.*InspectionJohnny On The Spot  02/02/07 08:30 AM
.*Drawings provide design intent jetero   02/13/07 10:24 AM
.*Re: Drawings provide design intent NormCrawford   02/15/07 06:12 AM
.*Re: Drawings provide design intent jetero   02/18/07 10:10 AM
.*data on 3D CAD printable with model inma   06/04/07 09:31 AM
.*Re: data on 3D CAD printable with model NormCrawford   06/05/07 05:32 AM
.*Re: Inspection NormCrawford   02/12/07 05:41 AM
.*Annotation is not the way to go with GD&TAmazed  11/15/06 07:20 AM
.*Re: Annotation is not the way to go with GD&TNorm  11/16/06 09:12 AM
.*INSPECTIONJoe  08/19/06 08:30 AM
.*Re: INSPECTIONNorm Crawford  08/23/06 07:05 AM
.*Re: INSPECTIONJoe  08/28/06 07:38 AM
.*Re: INSPECTIONNorm  09/01/06 07:55 AM
.*Re: INSPECTIONJoE  09/02/06 08:59 AM
.*Re: INSPECTIONNorm  09/06/06 07:59 AM
.*Re: INSPECTIONJOE  09/07/06 10:31 AM
.*Re: INSPECTIONNorm  09/13/06 02:11 PM
.*Re: INSPECTIONJoe  09/14/06 08:13 AM
.*Re: INSPECTIONJoe  09/14/06 08:04 AM
.*Re: INSPECTIONNorm  09/27/06 06:54 AM
.*Re: INSPECTION BrentArmstrong   09/06/07 01:09 PM
.*Re: INSPECTION NormCrawford   09/07/07 01:32 PM
.*Re: INSPECTION BrentArmstrong   09/10/07 06:07 AM
.*Re: INSPECTION jim_merry   11/29/07 09:01 AM
.*Infrastructure to View 3D PMI NormCrawford   12/04/07 09:06 PM
.*Re: INSPECTION jang2946   08/18/07 05:55 AM
.*Re: INSPECTION NormCrawford   08/23/07 06:31 AM
.*Re: INSPECTIONdprawel  09/29/06 09:47 PM
.*Re: standardsNorm  10/05/06 04:20 PM
.*Re: INSPECTIONJoe  09/27/06 08:11 AM
.*Re: INSPECTIONNorm  10/05/06 04:35 PM
.*Re: INSPECTIONJoe  10/06/06 09:01 AM
.*Re: INSPECTIONJoe  10/06/06 09:54 AM
.*Re: INSPECTIONNorm  10/11/06 06:47 AM
.*Re: INSPECTIONJoe..  10/11/06 08:12 AM
.*Re: INSPECTIONJoe  10/11/06 08:23 AM
.*Re: INSPECTIONJoe  11/12/06 06:33 AM
.*Re: GD&TJeroen  09/05/06 12:58 AM
.*Increase Solid Model Value with 3D GD&TCPerhala  08/08/06 07:00 AM
.*Re: Increase Solid Model Value with 3D GD&TNorm Crawford  08/08/06 08:01 AM
.*Re: Increase Solid Model Value with 3D GD&TDKorneffel  08/08/06 06:29 AM
.*Sales are in the other columnDisappointed  08/08/06 04:21 AM
Jump to


Colortrac: LearnMore
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise