MCADCafe
   >> MCAD User News and Reviews
Thread views: 389149 View all threadsNext thread*

Joe
(Unregistered)
08/19/06 08:30 AM
INSPECTION Report this article as Inappropriate to us !!!Login to Reply

I was assigned a job of making some inspection drawings from some aircraft parts. The models were done in UG and came with drawings with critical dimensions and GD&T. I was using KEYCREATOR (CADKEY) to create the drawings. These parts were designed by CAD jockeys or engineers. If they had to make a complete drawing they would have realized the problems that manufacturing would face with making and inspecting these parts. The article shows a block with a couple of holes in it. Many parts have hundreds of features that have to be defined and inspected. You either do it by sitting down at a computer and verifying that the part matches the model feature by feature or you create a hard copy drawing that anyone can pull out at any time to check a feature. Now many companies are sending out models with minimum annotation. But they are just passing this required function off to the manufacturing company to do the full inspection drawing. This is something that would be much better done by the original design group. Complete drawings are part of the design function.


Entire thread
SubjectPosted byPosted on
*Increase Solid Model Value with 3D GD&T  08/08/06 04:21 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/19/07 05:38 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   12/21/07 07:01 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/22/07 08:07 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   01/03/08 06:54 AM
.*InspectionJohnny On The Spot  02/20/07 04:47 PM
.*Re: Inspection NormCrawford   02/22/07 04:58 AM
.*Re: Inspection brian575   03/16/07 12:42 PM
.*Re: enjoyed the article NormCrawford   03/21/07 08:03 AM
.*InspectionJohnny On The Spot  02/02/07 08:30 AM
.*Drawings provide design intent jetero   02/13/07 10:24 AM
.*Re: Drawings provide design intent NormCrawford   02/15/07 06:12 AM
.*Re: Drawings provide design intent jetero   02/18/07 10:10 AM
.*data on 3D CAD printable with model inma   06/04/07 09:31 AM
.*Re: data on 3D CAD printable with model NormCrawford   06/05/07 05:32 AM
.*Re: Inspection NormCrawford   02/12/07 05:41 AM
.*Annotation is not the way to go with GD&TAmazed  11/15/06 07:20 AM
.*Re: Annotation is not the way to go with GD&TNorm  11/16/06 09:12 AM
.*INSPECTIONJoe  08/19/06 08:30 AM
.*Re: INSPECTIONNorm Crawford  08/23/06 07:05 AM
.*Re: INSPECTIONJoe  08/28/06 07:38 AM
.*Re: INSPECTIONNorm  09/01/06 07:55 AM
.*Re: INSPECTIONJoE  09/02/06 08:59 AM
.*Re: INSPECTIONNorm  09/06/06 07:59 AM
.*Re: INSPECTIONJOE  09/07/06 10:31 AM
.*Re: INSPECTIONNorm  09/13/06 02:11 PM
.*Re: INSPECTIONJoe  09/14/06 08:13 AM
.*Re: INSPECTIONJoe  09/14/06 08:04 AM
.*Re: INSPECTIONNorm  09/27/06 06:54 AM
.*Re: INSPECTION BrentArmstrong   09/06/07 01:09 PM
.*Re: INSPECTION NormCrawford   09/07/07 01:32 PM
.*Re: INSPECTION BrentArmstrong   09/10/07 06:07 AM
.*Re: INSPECTION jim_merry   11/29/07 09:01 AM
.*Infrastructure to View 3D PMI NormCrawford   12/04/07 09:06 PM
.*Re: INSPECTION jang2946   08/18/07 05:55 AM
.*Re: INSPECTION NormCrawford   08/23/07 06:31 AM
.*Re: INSPECTIONdprawel  09/29/06 09:47 PM
.*Re: standardsNorm  10/05/06 04:20 PM
.*Re: INSPECTIONJoe  09/27/06 08:11 AM
.*Re: INSPECTIONNorm  10/05/06 04:35 PM
.*Re: INSPECTIONJoe  10/06/06 09:01 AM
.*Re: INSPECTIONJoe  10/06/06 09:54 AM
.*Re: INSPECTIONNorm  10/11/06 06:47 AM
.*Re: INSPECTIONJoe..  10/11/06 08:12 AM
.*Re: INSPECTIONJoe  10/11/06 08:23 AM
.*Re: INSPECTIONJoe  11/12/06 06:33 AM
.*Re: GD&TJeroen  09/05/06 12:58 AM
.*Increase Solid Model Value with 3D GD&TCPerhala  08/08/06 07:00 AM
.*Re: Increase Solid Model Value with 3D GD&TNorm Crawford  08/08/06 08:01 AM
.*Re: Increase Solid Model Value with 3D GD&TDKorneffel  08/08/06 06:29 AM
.*Sales are in the other columnDisappointed  08/08/06 04:21 AM
Jump to

 




Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise