[Eric Kam Technical Services Manager AutoForm Engineering USA] ==============================================================
**** ANNOUNCING NAUM 2007 ****
Announcing AutoForm's North American User Meeting (NAUM-2007) Feb 5-6, 2007 at the Townsend Hotel in Birmingham, MI with leadership panel discussions, user presentations, case-studies, workshops, networking socials and more...
We will also introduce AutoForm v4.1 with numerous enhancements and updates. Space is limited. Contact email@example.com to register !!!
AutoForm Engineering USA Email: firstname.lastname@example.org
560, Kirts Blvd, Suite 113 Phone: 888.428.8636 x 106
Troy, MI 48084-4141 (USA) Fax: 888.528.8636
www.autoform.com Mobile: 313.790.0538
[Eric Kam]not that I recall. You had sent over notes before on a different, but similar system.
[Jim Peck]Eric Kam, Did we discuss Phast previously?
[http://www.worldautosteel.org/ulsac/328.htm] Circle grid strain analysis in the ULSAC program was performed to determine real strains or material thinning and material thickening of the three-dimensional stamped parts. Those measured strain and material thinning values were compared with the forming simulation results. Corus NL Research & Development performed the circle grid strain analysis on the stamped parts. They are equipped with the latest system for strain measurement, called Phast, which is jointly developed by Geodelta and Corus NL Research & Development. Phast is a vision-based measurement system that determines surface strains on formed sheet metal. The measurement errors are between ±0.5% (absolutely). The first step was to apply a point circle grid pattern on the flat steel sheet by electro-chemical etching prior to the stamping process.
SME Sheet Metal Stamping Forum
Jim Peck blog re automobile sheet metal forming