>> MCAD User News and Reviews
Thread views: 384095 View all threadsNext thread*

09/14/06 08:04 AM
Re: INSPECTION [re: Norm]Report this article as Inappropriate to us !!!Login to Reply

I will continue the conversation here but look forward to talking to you.

I have taken another job to detail a part that came from a large aircraft manufacturer. This one came without any annotation. I believe as schedules get tight and now that the drawing process has been eliminated, any annotation will be also eliminated. This is a part that has gone to a company that specifically designs these types of parts. We have had to redesign and add simple things like thread relief’s and actually had change the configuration. What concerns me is that the design is not being scrutinized enough. I believe the drawing is that one thing that allows a more complete look at the design. I even believe it is less time consuming to create the drawing. I can do a very complex part in 3 to 5 hours from a solid model. The days of the 20 hour D size drawings are over.

I would like to see one of the jobs you do with let’s say 30 holes and bosses, including thread info. I am sure those that are interested would like to see how simple it is to move thru the model inspecting the part or doing a design review. I sure would like to see more than a block with a few holes.

If you need a good viewer, you can down load SPECTRUM for free from

Entire thread
SubjectPosted byPosted on
*Increase Solid Model Value with 3D GD&T  08/08/06 04:21 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/19/07 05:38 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   12/21/07 07:01 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/22/07 08:07 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   01/03/08 06:54 AM
.*InspectionJohnny On The Spot  02/20/07 04:47 PM
.*Re: Inspection NormCrawford   02/22/07 04:58 AM
.*Re: Inspection brian575   03/16/07 12:42 PM
.*Re: enjoyed the article NormCrawford   03/21/07 08:03 AM
.*InspectionJohnny On The Spot  02/02/07 08:30 AM
.*Drawings provide design intent jetero   02/13/07 10:24 AM
.*Re: Drawings provide design intent NormCrawford   02/15/07 06:12 AM
.*Re: Drawings provide design intent jetero   02/18/07 10:10 AM
.*data on 3D CAD printable with model inma   06/04/07 09:31 AM
.*Re: data on 3D CAD printable with model NormCrawford   06/05/07 05:32 AM
.*Re: Inspection NormCrawford   02/12/07 05:41 AM
.*Annotation is not the way to go with GD&TAmazed  11/15/06 07:20 AM
.*Re: Annotation is not the way to go with GD&TNorm  11/16/06 09:12 AM
.*INSPECTIONJoe  08/19/06 08:30 AM
.*Re: INSPECTIONNorm Crawford  08/23/06 07:05 AM
.*Re: INSPECTIONJoe  08/28/06 07:38 AM
.*Re: INSPECTIONNorm  09/01/06 07:55 AM
.*Re: INSPECTIONJoE  09/02/06 08:59 AM
.*Re: INSPECTIONNorm  09/06/06 07:59 AM
.*Re: INSPECTIONJOE  09/07/06 10:31 AM
.*Re: INSPECTIONNorm  09/13/06 02:11 PM
.*Re: INSPECTIONJoe  09/14/06 08:13 AM
.*Re: INSPECTIONJoe  09/14/06 08:04 AM
.*Re: INSPECTIONNorm  09/27/06 06:54 AM
.*Re: INSPECTION BrentArmstrong   09/06/07 01:09 PM
.*Re: INSPECTION NormCrawford   09/07/07 01:32 PM
.*Re: INSPECTION BrentArmstrong   09/10/07 06:07 AM
.*Re: INSPECTION jim_merry   11/29/07 09:01 AM
.*Infrastructure to View 3D PMI NormCrawford   12/04/07 09:06 PM
.*Re: INSPECTION jang2946   08/18/07 05:55 AM
.*Re: INSPECTION NormCrawford   08/23/07 06:31 AM
.*Re: INSPECTIONdprawel  09/29/06 09:47 PM
.*Re: standardsNorm  10/05/06 04:20 PM
.*Re: INSPECTIONJoe  09/27/06 08:11 AM
.*Re: INSPECTIONNorm  10/05/06 04:35 PM
.*Re: INSPECTIONJoe  10/06/06 09:01 AM
.*Re: INSPECTIONJoe  10/06/06 09:54 AM
.*Re: INSPECTIONNorm  10/11/06 06:47 AM
.*Re: INSPECTIONJoe..  10/11/06 08:12 AM
.*Re: INSPECTIONJoe  10/11/06 08:23 AM
.*Re: INSPECTIONJoe  11/12/06 06:33 AM
.*Re: GD&TJeroen  09/05/06 12:58 AM
.*Increase Solid Model Value with 3D GD&TCPerhala  08/08/06 07:00 AM
.*Re: Increase Solid Model Value with 3D GD&TNorm Crawford  08/08/06 08:01 AM
.*Re: Increase Solid Model Value with 3D GD&TDKorneffel  08/08/06 06:29 AM
.*Sales are in the other columnDisappointed  08/08/06 04:21 AM
Jump to


TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise