MCADCafe
   >> MCAD User News and Reviews
Thread views: 390253 View all threadsNext thread*

Norm
(Unregistered)
09/01/06 07:55 AM
Re: INSPECTION [re: Joe]Report this article as Inappropriate to us !!!Login to Reply

Joe,
I have done drawings, and I was very good at it, long before CAD came around. I might add that I have experience doing so on military aircraft. So, I can speak from my personal experience of using the different methods of reading product design from creating and reading paper drawings to 3D solid models with value added 3D GD&T.
The "technologies" you speak of to view and read 3D solid models with intelligent value added 3D GD&T are far cheaper then the capital and maintenance cost of plotters and the paper.
Here is a real life example of through put. I worked for a company, although using CAD, plotted all the drawings, which were checked by checkers using red, yellow, and green markers. I changed that process, although using 2d drawings, the drawings remained electronic and I trained the checkers to use only what they needed to mark the drawings up using basic cad skills. The difference was a 700% increase in work throughput and far far better retieval (reuse) of the corrections to understand and learn (teach) to begin to eliminate constant errors and gain significant consistency. Doing a similar but improved process with 3D will gain similar results.
BTW are you familiar with the new PDF capability to view 3D models and the 3D annotation? Might want to look into that.




Entire thread
SubjectPosted byPosted on
*Increase Solid Model Value with 3D GD&T  08/08/06 04:21 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/19/07 05:38 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   12/21/07 07:01 AM
.*Re: Increase Solid Model Value with 3D GD&T BrentArmstrong   12/22/07 08:07 AM
.*Re: Increase Solid Model Value with 3D GD&T NormCrawford   01/03/08 06:54 AM
.*InspectionJohnny On The Spot  02/20/07 04:47 PM
.*Re: Inspection NormCrawford   02/22/07 04:58 AM
.*Re: Inspection brian575   03/16/07 12:42 PM
.*Re: enjoyed the article NormCrawford   03/21/07 08:03 AM
.*InspectionJohnny On The Spot  02/02/07 08:30 AM
.*Drawings provide design intent jetero   02/13/07 10:24 AM
.*Re: Drawings provide design intent NormCrawford   02/15/07 06:12 AM
.*Re: Drawings provide design intent jetero   02/18/07 10:10 AM
.*data on 3D CAD printable with model inma   06/04/07 09:31 AM
.*Re: data on 3D CAD printable with model NormCrawford   06/05/07 05:32 AM
.*Re: Inspection NormCrawford   02/12/07 05:41 AM
.*Annotation is not the way to go with GD&TAmazed  11/15/06 07:20 AM
.*Re: Annotation is not the way to go with GD&TNorm  11/16/06 09:12 AM
.*INSPECTIONJoe  08/19/06 08:30 AM
.*Re: INSPECTIONNorm Crawford  08/23/06 07:05 AM
.*Re: INSPECTIONJoe  08/28/06 07:38 AM
.*Re: INSPECTIONNorm  09/01/06 07:55 AM
.*Re: INSPECTIONJoE  09/02/06 08:59 AM
.*Re: INSPECTIONNorm  09/06/06 07:59 AM
.*Re: INSPECTIONJOE  09/07/06 10:31 AM
.*Re: INSPECTIONNorm  09/13/06 02:11 PM
.*Re: INSPECTIONJoe  09/14/06 08:13 AM
.*Re: INSPECTIONJoe  09/14/06 08:04 AM
.*Re: INSPECTIONNorm  09/27/06 06:54 AM
.*Re: INSPECTION BrentArmstrong   09/06/07 01:09 PM
.*Re: INSPECTION NormCrawford   09/07/07 01:32 PM
.*Re: INSPECTION BrentArmstrong   09/10/07 06:07 AM
.*Re: INSPECTION jim_merry   11/29/07 09:01 AM
.*Infrastructure to View 3D PMI NormCrawford   12/04/07 09:06 PM
.*Re: INSPECTION jang2946   08/18/07 05:55 AM
.*Re: INSPECTION NormCrawford   08/23/07 06:31 AM
.*Re: INSPECTIONdprawel  09/29/06 09:47 PM
.*Re: standardsNorm  10/05/06 04:20 PM
.*Re: INSPECTIONJoe  09/27/06 08:11 AM
.*Re: INSPECTIONNorm  10/05/06 04:35 PM
.*Re: INSPECTIONJoe  10/06/06 09:01 AM
.*Re: INSPECTIONJoe  10/06/06 09:54 AM
.*Re: INSPECTIONNorm  10/11/06 06:47 AM
.*Re: INSPECTIONJoe..  10/11/06 08:12 AM
.*Re: INSPECTIONJoe  10/11/06 08:23 AM
.*Re: INSPECTIONJoe  11/12/06 06:33 AM
.*Re: GD&TJeroen  09/05/06 12:58 AM
.*Increase Solid Model Value with 3D GD&TCPerhala  08/08/06 07:00 AM
.*Re: Increase Solid Model Value with 3D GD&TNorm Crawford  08/08/06 08:01 AM
.*Re: Increase Solid Model Value with 3D GD&TDKorneffel  08/08/06 06:29 AM
.*Sales are in the other columnDisappointed  08/08/06 04:21 AM
Jump to

 




Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise