[ Back ]   [ More News ]   [ Home ]
August 03, 2009
Open Source An Alternative CAD Source?
Please note that contributed articles, blog entries, and comments posted on MCADcafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.
Jeff Rowe - Managing Editor


by Jeff Rowe - Contributing Editor
Each MCAD Weekly Review delivers to its readers news concerning the latest developments in the MCAD industry, MCAD product and company news, featured downloads, customer wins, and coming events, along with a selection of other articles that we feel you might find interesting. Brought to you by MCADCafe.com. If we miss a story or subject that you feel deserves to be included, or you just want to suggest a future topic, please contact us! Questions? Feedback? Click here. Thank you!


I don’t attend nearly as many software conferences as I used to, because frankly, there just aren’t as many as there used to be. With travel expenses keenly in mind, I’ve also become very selective of the conferences I do choose to attend. I’ve been increasingly curious about some alternatives to traditional proprietary software, so I had been looking for a comprehensive venue to learn about the open source software movement and community. In other words, one-stop shopping for a rudimentary education on open source, and luckily, I found it.


I just returned from attending the
O’Reilly Open Source Convention (OSCON) 2009 in San Jose, CA. I honestly didn’t know what to expect when I got there, but by the time I left I was very impressed by what has been accomplished so far, as well as the ambitious plans for the future by this very smart, socially aware, and fascinating community. I came dressed in business casual attire, and immediately realized I was over-dressed. However, I was encouraged to hang out with the folks in T-shirts, and vice versa. Feeling a bit uneasy when I arrived to this new world, I was immediately and continually welcomed into the fold as the week went by, and was
actually encouraged to ask questions (I can say that none of my many questions were dismissed as dumb or uninformed). I was there to learn and I learned a lot.


One of the messages that I particularly enjoyed was the fact that even in this terrible economy, open source software is about working not with just technology, but people, and the open source software sector is growing. Open source software is not driven by corporate budgets, but by people fulfilling a need and software freedom. I also learned that the currency of open source is not necessarily money, but rather, beer and T-shirts. Open source software (OSS) projects are built and maintained by a network of volunteer developers and other team members that help with documentation, marketing, etc. While much of the software may be free or very low cost (depending on the licensing
arrangement), there are also independent implementation, customization, and support consultants who are paid for their services.


I learned that there are four basic tenets to open source software:
  • Use the software
  • Study and modify the software to improve it
  • Redistribute the software
  • Participate and give back to the open source community

  • I really felt that this was a refreshing change and difference when compared to most closed, proprietary software.


    When I thought about it, the list of open source software applications is actually quite long. Some of the major open source applications you may have heard about include MySQL, Apache Server, Wordpress, Mozilla Firefox, Joomla, Wordpress, Drupal, just to name a few.


    I found it interesting to hear that all of the members of the European Union (EU) are required to use open source Linux-based software exclusively, and this includes everything from operating systems to office applications. There is also a move afoot here in this country to attempt to do a similar thing. A couple of the major programs are Government 2.0, that hopes to leverage Web 2.0 federated social networks in government, and Open Source for America, that advocates greater acceptance of open source software and efforts.


    Open source Linux actually fostered the emergence of a couple of computer categories – the netbook, including the one laptop per child (OLPC) program where a good percentage are sold with Linux as the operating system.


    As part of shaking things up looking ahead to the future, I sat in on a presentation that discussed what user interfaces might look and feel like in 2020. The presenter, Robin Rowe (no relation) opened his presentation with the question, “How much longer will we be WIMPs? (windows, icons, menus, and pointers)?” He felt that within 10 years, next-generation user interfaces would be comprised of the following capabilities:
  • Gesture
  • Speech
  • Conversation artificial intelligence
  • Image artificial intelligence
  • 3D heads-up display
  • New I/O devices

  • He also said that unlike the past, defense UI applications are not transitioning to commercial applications at nearly the previous rate. As a matter of fact, most are coming out of academic research labs and Hollywood, although he felt that commercial applications were at least a decade behind what is going on in the labs.


    There were a surprising number of vendors in the exhibit hall, including Microsoft. They included several of the Linux distribution organizations, such as Ubuntu, FreeBSD, and openSUSE. There were also some open source companies exhibiting that we have all become familiar with (whether or not we associate them with the open source movement), including Google, Open Office, Intel, Amazon, Facebook, and Novell. However, there were no CAD vendors, per se, at the conference. I asked myself, “Why not?”


    As it turns out, there are quite a few open source CAD efforts taking place. While they yet don’t exactly rival the efforts or capabilities of, say, Siemens or Dassault Systemes, there are several applications out there and available running under Linux, Windows, and Mac operating systems. Some of the 2D and 3D CAD and CAD-related open source applications include Blender, CADEMIA, Open CASCADE, PythonCAD, Free-CAD,Cadvas, BRL-CAD, QCad, and Archimedes. There are also several open source CAM and CAE applications available, as well. There is even a specialized engineering-oriented distribution of Linux called CAE Linux.


    Graphics capabilities (2D and 3D) are improving rapidly under the Linux banner, assisted in part by the Graphics Execution Manager (GEM), that efficiently manages graphics memory in graphics chipsets. GEM was developed by Intel, starting in May 2008, as a minimalist, easy-to-use alternative to the TTM (Translation Table Maps).


    Will the general MCAD vendor community jump on the open source bandwagon? I tend to doubt it, but I am sure that most of the players are watching closely to what transpires as the open source movement continues to grow and evolve. Who knows how the economy, social networking, and the next generation of software users might shape the MCAD software market and how it does business. Open source as a potential future alternative CAD source? It’s already happening.


    If you’re interested in the open source software community, I highly recommend that you attend OSCON 2010, tentatively scheduled for July 2010 in Portland, Oregon. I highly recommend that you take advantage of this great opportunity to learn what open source is all about.


    The Week’s Top 5


    At MCADCafé we track many things, including the stories that have attracted the most interest from our subscribers. Below are the five news items that were the most viewed during last week.



    At the recent Clean Tech Open (CTO) Renewable Energy Symposium, Autodesk introduced the Autodesk Clean Tech Partner Program. The program awards "seed" grants consisting of free bundles of Autodesk software to early-stage, clean technology companies working to solve some of the world's most pressing environmental challenges. "We understand the significant role design plays in creating a sustainable future," said Lynelle Cameron, director of sustainability for Autodesk. "The Autodesk Clean Tech Partner Program is designed to accelerate innovation and leadership in the clean tech market. As part of our ongoing commitment to global sustainability, Autodesk
    will be working together with emerging clean tech companies to help bring their ideas to market faster and more cost-effectively." Recipients of the Autodesk Clean Tech software grant will receive a collection of Autodesk's top applications:
  • Autodesk Inventor Professional
  • Autodesk Showcase Professional
  • Autodesk Vault Manufacturing
  • Autodesk Navisworks Manage
  • Autodesk Revit Architecture
  • Autodesk Alias Design

  • Each grant has a retail value of up to U.S. $150,000, and will include up to five full commercial licenses of each application.


    SpaceClaim Showcases Multi-Touch for 3D Engineering Design

    SpaceClaim announced the company will enable engineers and industrial designers to leverage Windows Touch to create and edit solid models. SpaceClaim marked the news by releasing a video that demonstrates how multi-touch with SpaceClaim 3D Direct Modeling solutions will impact design and engineering. Recently, SpaceClaim announced that the company was chosen by Microsoft as one of a few select Independent Software Vendors (ISV's) in support of the launch of Windows 7, and by N-trig to support DuoSense dual-mode technology, that allows multi-touch in conjunction with a stylus. Multi-touch -- enabling on-screen objects to be manipulated using multiple fingers -- is becoming
    mainstream through the launch of Windows 7 from Microsoft. While multi-touch is expected to become common on PC hardware, SpaceClaim is ensuring that 3D design will be one of the earliest and most compelling uses of the technology. SpaceClaim will support any multi-touch hardware that uses Windows 7, including those from 3M, N-trig, HP, Dell, and Lenovo. Windows Touch provides SpaceClaim customers with the most flexibility by augmenting the mouse and keyboard as a new way to interact with solid models.

    Hexagon Metrology Initiates Litigation Against Metris and Mitutoyo

    Hexagon Metrology has filed a patent infringement suit in U.S. District Court in Massachusetts alleging that Metris N.V. and its U.S. subsidiary Metris U.S.A., Inc., and Mitutoyo Corporation and its U.S. subsidiary Mitutoyo America Corp., have infringed U.S. Patent No. 5,829,148 by importing into the U.S. and offering to sell infringing portable arms. “Hexagon Metrology welcomes fair competition,” says William Gruber, President of Hexagon Metrology, “but we will not stand by if competitors use our protected technology, which our customers recognize and rely upon and which has given us a leading position in the metrology industry.” The suit seeks to
    prevent Metris and Mitutoyo from importing, offering for sale or using the infringing portable arms in the U.S. Hexagon Metrology sells articulated arms in the U.S. under the brand name ROMER.

     


    Porsche AG has selected PROSTEP’s OpenDXM GlobalX as its central data exchange platform. Quality and reliability are basic requirements at Porsche, not only for its end products but also on the path leading to these products, namely during product development. What the company was looking for was a modern data exchange solution that could satisfy these requirements in addition to a variety of other requirements. An in-depth test phase and final benchmarking involving a number of different portal providers indicated that PROSTEP was best able to meet Porsche’s demanding specifications with its OpenDXM GlobalX data exchange platform. This Internet-based
    solution enables the secure, stable and standardized exchange of files of any size and type. In addition, the extensive rights management facility offered by OpenDXM GlobalX allows the access rights to data to be defined for individual groups of people as necessary and, of course, the solutions is also easy for users to work with. Other requirements dictated that the data exchange solution should be scalable and that it be possible to integrate the solution in the existing infrastructure without investing too much time and effort so that, for example, single sign-on authentication is possible. Another requirement involved easy integration in existing backend systems.


    NVIDIA Quadro Processors Propel 3D Design to New Heights for AutoCAD 2010 Users

    NVIDIA Corp. announced that the NVIDIA Quadro line of professional solutions is now optimized for Autodesk AutoCAD 2010. Coupling graphics capabilities with specially built AutoCAD performance drivers, Quadro processors enable design professionals to create and interact with more complex 3D product designs. Starting at under $100, NVIDIA Quadro solutions offer AutoCAD users maximum productivity at every price point. In addition to maximizing productivity, the benefits of combining Quadro solutions with AutoCAD 2010 include:
  • Best in Class Quality – Quadro processors offer the best price performance for workstation graphics with the optimal blend of quality, precision and performance. Quadro solutions are engineered, built and tested by NVIDIA to achieve premium quality standards.
  • Unprecedented Performance – Quadro processors enable up to a 5X performance increase in ‘3D Hidden’ visual style and faster interactive manipulation of models in ‘Conceptual’ and ‘Realistic’ visual styles.
  • Easy Interaction with 3D Models – Quadro processors offer the ability to easily manipulate and interact with large scale models while working at the maximum visual quality that is necessary to render high-polygon 3D models precisely.
  • Superior Image Quality – Quadro processors offer higher image quality without sacrificing performance with AutoCAD smooth lines display, a Quadro-specific feature available through NVIDIA’s AutoCAD performance driver.
  • Advanced Multi-Display Support – NVIDIA nView advanced display software delivers maximum flexibility for single-large display or multi-display options at resolutions up to 2560 x 1600 per display.

  • NVIDIA’s new performance drivers for AutoCAD 2010 are free and available for download from NVIDIA’s Web site:
    www.nvidia.com.


    Jeffrey Rowe is the editor of
    MCADCaféand MCAD Weekly Review. He can be reached at
    Email Contact or 408.850.9230.




     

    This Week



    Lead Story


    Open Source An Alternative CAD Source?


    Product and Company News


    Advanced Off-line Inspection Software Speeds Up Manufacturing and Assembly for Aerospace Giant


    Solido Signs Business Partnership Agreement With ENSER Corporation of the US


    Unite the power of Parametric with the ease of Direct modeling. Free Download - Inventor Fusion Technology


    KOMPAS-3D now available in Polish and Chinese


    CAD Schroer Enhances MPDS4 With HOOPS From Tech Soft 3D


    Vero Launches VISI 17


    Norton Motorcycles Ltd selects PTC’s Product Development System from INNEO Solutions Ltd


    SpaceClaim Awarded Major OEM Contract by Flow International Corporation


    SolidVision Announces Partnership with Solido to Bring the Most Affordable 3D Prototyping to Engineering and 3D Design Markets


    Lattice Technology Releases Lattice3D Reporter Version 3.0


    KC Samyang Water Systems Selects Siemens PLM Software to Support Growth


    Extensible CAD Announces InspectionXpert for AutoCAD and InspectionXpert for Solid Edge


    Delta Marine Steers Ships in the Right Direction Using ANSYS Engineering Simulation


    Autodesk Helps Bring Automotive Design Data from CAD to Ad


    PTC and Scalextric announce the winner of the Scalextic4Schools Initiative


    Autodesk Recognizes Mid-West CAD as Reseller of the Quarter for Q1 FY2010


    StudioGPU MachStudio Pro Adds Support for Google SketchUp Pro and Rhino Software


    Catalog Data Solutions customer exceeds 48,000 CAD downloads


    Formtek, Inc. Implements an Alfresco Open Source ECM Solution for Dorfman Pacific


    Sajan Joins PTC PartnerAdvantage Program


    WorkNC takes the problem out of programming at Expert Tooling & Automation


    Pointwise Interns Win With Muffin Mesh


    Native AcuSolve Interface Added to Latest Pointwise Release


    Great Potential for 2D Design and Budget Savings


    Lattice Technology Releases Updated XVL Converter Products


    MecSoft’s New VisualMILL for SolidWorks Shifts Paradigm of Integrated CAM for SolidWorks


    New 3D Printer Reduces Time to Market for Engineering and Design Firms


    New Functionalities for think3’s ThinkDesign 2009.1


    Theorem delivers more cost saving power in new TPM V3


    Industrial Experts Reveal the Secrets of Successful Simulation


    Zhejiang Fuchunjiang Hydropower Equipment Co., Ltd Selects Siemens PLM Software's Integrated Solution to Turbocharge Competitive Position


    mental images Unveils Reality Server 2.3 Software


    ModernTech Mechanical Application Engineers Earn SolidWorks Certifications


    Tata Technologies Launches i SUPPORT IT – Four-tiered Solution for PLM and Engineering Professionals


    TransMagic Products Offered By Digital Design Solutions


    Stratasys Conference Call to Discuss Second Quarter Financial Results


    AREVA Names ANSYS Certified Supplier


    Sescoi and CDTA bring digital moldmaking to Algerian manufacturers


    Delcam CRISPIN releases new shoe upper design software


    Related MCAD News


    First Boeing 747-8 Freighter Takes Shape


    EDA Consortium Reports Industry Revenue Down in First Quarter 2009


    American Aerospace Heroes Converge on Dayton for Apollo Anniversary


    Sun Microsystems Reports Preliminary Results for Q4 FY 2009


    Ball Aerospace Wins National Air and Space Intelligence Center Contract


    Boeing Reports Second-Quarter Financial Results


    Concepts NREC Signs Global Machine Tool Partnership with Hermle


    AMT President Urges Congress to Assist Small Manufacturers


    Omnify Software Helps Medical Device Customers Automate Training Processes


    3PAR Introduces Cloud-Agile Program Aimed at Enterprise Cloud Computing Leaders


    Trelleborg Sealing Solutions Launches a New Low-Temperature FKM Sealing Compound Specifically for Aerospace Engine Applications


    SAE Automotive Resources Institute to End Services by Close of 2009


    Rotoblock (RTBC) Targets Hi-Tech Manufacturing in China


    Industry Events


    CIMdata Inc. Announces Its Next PLM Certificate Program


    V.i. Labs to Discuss Anti-Piracy Techniques at the Design Automation Conference


    3D Systems Announces Conference Call and Webcast to Discuss Second-Quarter and Six-Months 2009 Results


    46th Design Automation Conference Goes Green at Moscone This Week


    SpaceClaim and HyperShot Webinar


    Delcam to launch new FeatureCAM at EMO


    ModernTech Mechanical Announces August Webinar Series


    46th Design Automation Conference to Feature Special Plenary Panel on Green Technology


    Free Webcast – Learn How Portable 3D Scanners Save Time, Across More Applications


    ANSYS CEO to Present at Oppenheimer Annual Communications, Technology & Internet Conference


    Discover a Better Way to Teach Design with 3D Printing


    Industrial Experts reveal the secrets of simulation in design Free Webinar


    Protecting IP in Nuclear & Energy Organizations Webcast


    Corporate Newsletters


    Alibre News July 2009


    MecSoft Quarterly - July 2009


    Explore SpaceClaim Engineer 2009


    July e-dynamics: all the latest news from CD-adapco

     

     

     


    You can find the full MCADCafe event calendar here.


    To read more news, click here.



    -- Jeff Rowe, MCADCafe.com Contributing Editor.


    Reviews:
    For more discussions, follow this link …