[ Back ]   [ More News ]   [ Home ]
October 22, 2007
SolidWorks Co-Founds The CAD Academy
Please note that contributed articles, blog entries, and comments posted on MCADcafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.
Jeff Rowe - Managing Editor


by Jeff Rowe - Contributing Editor
Each MCAD Weekly Review delivers to its readers news concerning the latest developments in the MCAD industry, MCAD product and company news, featured downloads, customer wins, and coming events, along with a selection of other articles that we feel you might find interesting. Brought to you by MCADCafe.com. If we miss a story or subject that you feel deserves to be included, or you just want to suggest a future topic, please contact us! Questions? Feedback? Click here. Thank you!



SolidWorks Corp. has teamed with other leading design software providers to launch The CAD Academy, a secondary and post-secondary pre-engineering and pre-architectural program designed to inspire a new generation of engineers and architects at a price educators can afford. The program bundles industry-leading design, engineering, and architecture software with curriculum, support, and multimedia content, all at a fraction of the cost of other design education packages.



The CAD Academy software offering includes:

• SolidWorks Education Edition 3D CAD software for product design and mechanical engineering

• Graphisoft ArchiCAD, a Building Information Modeling (BIM) software program for architectural modeling

• Google SketchUp Pro, one of the simplest 3D design tools, with Podium photorealistic rendering

• A+ CAD, a proprietary The CAD Academy software product that uses the familiar AutoCAD user interface, commands, applications, and compatibility "without the high cost"

• Discovery Channel multimedia content, including excerpts from the "Extreme Engineering" show


"The CAD Academy is designed for school districts that need to increase opportunities for all students to apply math and science in relevant and compelling ways," said Marie Planchard, SolidWorks director of worldwide education markets. "It's a desperate need, as documented in 'Rising Above the Gathering Storm' and other studies showing that we in North America have a lot of ground to make up to sustain our competitiveness."


"Rising Above the Gathering Storm" is a seminal National Academies of Science Report focusing on reclaiming U.S advantages in the marketplace, science, and technology. It calls for a tripling of the number of students who pass advanced placement or similar math and science exams by 2010.


The CAD Academy addresses that need by helping middle and high school students in North America explore technology-oriented career paths through real-world projects that deepen understanding of science, engineering, architecture, and mathematics.


"The curriculum is thorough and the lessons are comprehensive," said Rudy Aguilar, drafting instructor at Apollo High School, Glendale, Ariz.


The CAD Academy software suite is bundled with comprehensive curriculum resources that are approved by the American Design Drafting Association (ADDA), the premier design drafting organization. It covers architectural, mechanical engineering, and civil engineering design, and is structured to support both new and highly experienced instructors, even if they've already developed their own curriculum.


The mechanical engineering curriculum utilizes the highly praised "Engineering Drawing and Design" text by Madsen, Madsen & Turpin, as well as many e-resources that provide lesson plans, syllabi, PowerPoint presentations, a computerized test bank, drawing files, and animations. The material covers basic analysis principles for use with SolidWorks' COSMOS(R) analysis software, which is included with SolidWorks Education Edition. Students emerge prepared to take the Certified SolidWorks Associate (CSWA) exam, demonstrating industry standard competencies in design and engineering principles.


For more information on The CAD Academy package, visit
http://www.thecadacademy.com or
www.solidworks.com.



Commentary By Jeffrey Rowe, Editor


I’ve volunteered to be a math tutor at the local high school this year and am involved with helping students with Algebra 2, Trigonometry, and Pre-Calculus. I got involved because I feel that math literacy has become as important as literacy in reading and writing. My main goal is not to make them math geniuses as much as helping to ensure that ten years from now they are not asking, “You want fries with that?,” as part of their daily work routine.


For the most part, the students I am involved with are pretty smart – book and street. The biggest challenge is not the math concepts, rather, it’s keeping them motivated, focused, and aware of why they would want to learn math at these levels in the first place. Based on my background and experience in mechanical design and engineering, I try to use that to provide a context and basis in reality. I’ll admit that at first it wasn’t as well-received as computer games, but a few of the students have shown some real interest in possibly pursuing a college degree in some sort of technology.


I’ve been big on MCAD’s influence and involvement with the educational community for a long time, so I was very interested in this announcement. SolidWorks has also taken a big interest and role with regard to education, as have some of its competitors – afterall, these are tomorrow’s customers. However, SolidWorks’ commitment is genuine and very supportive to its educational aspirations and endeavors.


Although it is currently very young, the CAD Academy is a collaboration of industry professionals, vendors, and educators creating a comprehensive and affordable pre-engineering/pre-architecture program for the education community. The goal of The CAD Academy is to inspire a new generation of engineers and architects through the implementation of industry leading software, curriculum, and multimedia content. Let’s focus here, however, on the MCAD side of the equation. With what it includes, the SolidWorks Education Edition 2007-2008 is a roughly equivalent hybrid of SolidWorks Office Professional and Premium. This time around the Education Edition has COSMOSWorks Advanced
Professional and COSMOSFloWorks Professional Edition analysis software for performing the analysis tasks undertaken by a typical design engineer. Student guides are now available from the Design Library embedded in SolidWorks Education Edition 2007-2008.


SolidWorks Education Edition 2007-2008 includes an enhanced DWGeditor tool for editing existing 2D DWG/DXF drawings and learning 2D design techniques – yes, there is still a place for 2D. SolidWorks supplies three DWGeditor licenses for every licensed version of SolidWorks Education Edition. Cost for the SolidWorks Education Edition starts at around $1,000 for 10 seats and goes down from there, based on the total number of licenses purchased.


To supplement the software, SolidWorks has created a new curriculum portal (
http://www.solidworks.com/curriculum) that includes several new resources for educators, including lessons, projects, exercises, answer keys, movies, white papers, PowerPoint presentations, and case studies, as well as expanded course-specific curricula for design analysis. The portal complements the STEM (science, technology, engineering, and mathematics) weblog (
http://blogs.solidworks.com/teacher) that SolidWorks launched last year, and now offers more than 100 free lessons. SolidWorks says it receives more than 10,000 visits per month.


“Enticing students toward engineering careers means showing them what they can do with 3D CAD software,” said Marie Planchard , director of worldwide education markets at SolidWorks Corp. “Giving them integrated design and analysis lets them see how projects they’ve worked on will behave in the real world. More importantly, it gives them a taste of how professionals work every day. That’s a critical step in growing the global population of skilled engineers.” Her words echo my sentiments almost exactly. I’ve enjoyed immensely the challenges and rewards of being a mechanical designer and engineer, and would hope that I can instill upon the next
generation what the profession is all about with my enthusiasm that “engineering is cool.”



The Week’s Top 5


At MCADCafé we track many things, including the stories that have attracted the most interest from our subscribers. Below are the five news items that were the most viewed during last week.


Autodesk Named "Rising Star" in IT Distribution Industry

Autodesk announced that it is a recipient of a 2007 Rising Star Award from the Global Technology Distribution Council (GTDC). The award honors Autodesk as the fastest-growing software manufacturer in its revenue class, among firms doing business with GTDC member distributors. The GTDC Rising Star awards program recognizes the success IT manufacturers and publishers are having in partnership with IT distributors. The GTDC presents awards in each of three revenue categories based on GTDC member sales and vendors' U.S. revenue growth, as reported by industry research organization, The NPD Group, in its Distributor Track service. Autodesk was selected as
the first-place winner in the $100 million to $500 million category. GTDC distributor members provide products and services to solution providers and resellers supporting end users of all sizes, including the SMB market. GTDC members represent more than $100 billion in annual worldwide sales.


Dassault Systemes Launches DELMIA PLM Express

Dassault Systemes announced DELMIA PLM Express, suited for 5 to 50+ person companies that have a need for an entry-level PLM value channel offering for manufacturing. It delivers all the functionality and benefits of DELMIA in a way that allows customers to select a role-based solution that best matches their business needs. DELMIA PLM Express is offered in five role-based domains for manufacturing with dedicated, easy-to-deploy solutions within each of the following disciplines:

• Resource Planning

• Robotics

• Ergonomics

• Process Planning

• Controls


ESI Group’s Dummy Model Simulates Whiplash Effect in Automobile Crashes

ESI Group announced the release of Version 2.0 of BioRID-II (Biofidelic Rear Impact Dummy, model) for PAM-CRASH/PAM-SAFE 2G. This first industrial version of the newest BioRID-II dummy has an articulated thoracic/lumbar spine similar to the human (having 24 vertebrae). The neck is maintained under pre-tension load via a muscle substitute consisting of a single damper mounted in parallel with a flexor and an extensor spring. The abdomen is filled with a water cavity and the torso texture is a soft silicon rubber. BioRID-II with PAM-CRASH/PAM-SAFE 2G makes it possible to accurately simulate the acceleration, force, and the kinematics of a car occupant in order to minimize the whiplash injuries that can occur during a rear crash. Whiplash hurls the head violently backward (hyperextension) and forward (hyperflexion). The injury is even worse when the head is turned to the side at the time of the accident. Whiplash is the most common case of injuries in car crashes. These kind of injuries are therefore associated with serious medical consequences (they can affect intervertebral joints, discs, and ligaments, cervical muscles, and nerves) and significant societal costs. Reducing these injuries is a challenge for all engineers involved in improving the safety of car occupants. BioRID-II dummy model was validated on series of
component tests over the torso, head, neck and spine assemblies and on sled tests.


Geometric’s DFMXpress Tool for Manufacturability Analysis Included with SolidWorks 2008

Geometric Software announced that DFMXpress has been included in SolidWorks 2008. Fully integrated into SolidWorks, designers can gain insight into the cost-effective manufacturability of designs. DFMXpress accelerates and enriches the entire design through manufacturing process by automating the iterative design process via a series of rules-based checks for manufacturability. Design for Manufacturing (DFM) is a technology framework developed for designers by Geometric that facilitates upstream manufacturability validation and identification of areas of a design that are difficult, expensive or impossible to machine. DFM is engineered
to advise the designer on common problems faced in the manufacturing process. It is based on Geometric's industry-leading Manufacturing Feature Recognition technology, and leverages SolidWorks Intelligent Feature Technology (SWIFT) and manufacturing tolerances.


Latest Version of Solid Edge 2D Drafting Announced

Siemens PLM Software announced the latest version of Solid Edge 2D Drafting. Last year Siemens PLM Software made a strategic move to redefine the marketplace by commoditizing 2D with an emphasis on the value of transitioning to a managed 3D model. There is no cost to download or license the software; optional support and automatic upgrades are available for a nominal fee. Solid Edge 2D Drafting provides a set of capabilities for creating 2D designs and documentation, including drawing layout, diagramming, annotation and dimensioning controls that automatically comply with drafting standards. In addition, it provides intuitive wizards for robust
translation for smooth transition from 2D AutoCAD and other drafting applications. The latest release adds improved translator capabilities for AutoCAD 2D data supporting color 7, xrefs, and model space and paper space drawing scales. An import wizard shows a preview with any option changes. Also available in the release is the valuable Goal Seek functionality that helps solve complex 2D engineering scenarios with free-body diagrams. It allows users to set certain parameters, while the system varies other factors to achieve the desired target value of an engineering calculation. Results can also drive 3D geometry in a hybrid 2D/3D design environment.


Jeffrey Rowe is the editor of
MCADCafé and MCAD Weekly Review. He can be reached at
Email Contact or 408.850.9230.



This Week

Lead Story

SolidWorks Corporation Co-Founds "The CAD Academy"



Product and Company News


Spatial Corp. Chosen as Innovative Technology Company

Bunkspeed's Hypershot Extends Photographic Realism To Rhinoceros Users

Autodesk Inventor 2008 Update Supports Windows Vista

Liquid Machines Announces Document Control for SolidWorks 2008

ESI Group Releases VA One 2007 for Vibro-Acoustic Analysis and Design

Alibre and TraceParts Provide Access to Millions of 3D Models

i get it launches 2008 Update and Essentials Training Courses for AutoCAD and Inventor

Siemens PLM Software Technology Helps Riley Technologies Win Championship

CCE Announces New Release of EnSuite - the Multi-CAD Engineer’s Assistant

SolidWorks Spiderweb Contest

Innovation First and Autodesk Launch Web Site to Promote Robotics

Valeo Selects Dassault Systemes' DELMIA

VISTAGY and MSC.Software Partner to Optimize Product Development Process for Advanced Composites

Airbus Selects MSC.Software's SimXpert

ITER Virtually Defines Experimental Fusion Reactor with DELMIA

NKK Switches Launches 3D CAD Models With PARTsolutions Technology

Siemens PLM Software and Enigma Partner to Boost Profits in Aerospace and Defense

MSC.Software Reports Preliminary Revenue Results for Q3

Autodesk Sponsors Popular Mechanics' Breakthrough Awards

50,000 Register for CoCreate Software's Free 3D CAD

Microsat Systems Accelerates Satellite Time-to-Launch with SIMULIA

Acrobat 3D PDF Contest

Forming Technologies Announces CATIA-Based ProgNest

Anark-Sponsored Technology Report Reveals 3D Applications Drive Top Line Growth

Synergis Engineering Design Solutions Delivers Classroom Lab of Autodesk Software

PartMaker Named Certified CAM Partner by SolidWorks Corporation

Z Corp. to Offer 3D Printing with ZPrinter 450

MSC.Software and INCAT Expand Global Partnership

MSC.Software and PROSTEP AG Announce Enterprise Access to Simulation Information

Bluebeam Conversion Server v3.0 for Automated File Conversion Released

TraceParts Partners With Design World to Host Supplier-Certified 3D Models

Optimizing optical performances and light effects is now possible directly in CATIA V5

CAD Schroer Announces Release of STHENO/PRO® Version 3.0

Actify Enhances DesignShare

ESPRIT 2008 International Release and Service Pack 1 are Now Available

Phoenix Integration Announces CATIA, NX, and Pro/E Integration

ESPRIT Mold Version 9 CAM software released by DP Technology

Chicony Implements Pro/ENGINEER Wildfire

ANSYS to Release Q3 Earnings

A New Era in CFD Meshing Begins Today

Blue Ridge 5-Year Business Growth

Vero Software announce new company website

TopSolid - 2nd CAD/CAM solution in France

Top Cimatron Reseller Switches to Delcam

Anark Core Platform Embraced by Major Aerospace Manufacturers

Reebok Runs with 3D Systems' DuraForm Flex Plastic

hyperMILL V9.6 Announced

CAD Schroer Partners with C CAD Solutions to Bring Powerful MCAD Software to Engineers in India

Intelligent Light Delivers FieldView Version 12, the Industry's Most Comprehensive CFD and CAE Post-Processing Tool

PTC Pro/ENGINEER Reduces Chicony Electronics’ Product Development Time by 60%

Delcam's PowerSHAPE Makes Molds Faster

New Cognos Analysis Capability for Excel Users

COADE Releases CAESAR II Version 5.10 for Pipe Stress Analysis

Delcam PartMaker SolidWorks CAM Partner

Actify Expands With DesignShare Process

Symscape's SymLab v1.1.0 Released

FineLine Prototyping Joins 3D Systems' Network

Quickparts Expands to New Corporate HQ



Related MCAD News


EDS to Manage IS Environment for ArvinMeritor

Boeing Reports Q3 2007 Deliveries

Chrysler LLC and UAW Reach Tentative Agreement

KUKA Robotics Introduces Robotic Layer Forming Palletizing Solution

Boeing Donates $10 Million to Science Education at Chicago Museums

Discovery Communications to Acquire HowStuffWorks.com

HP Announces Strategy to Expand Its Software-as-a-Service Offering

Dassault's Falcon 2000DX Receives FAA and EASA Approval

Lear Corporation's Lean Manufacturing System Hikes Productivity and Reduces Costs

Adept Technology Launches New Robotics Packaging Channel



Industry Events


3D Systems Completes World Conference

ESPRIT 2008 by DP Technology to be Exhibited at the Mid-Atlantic Machine Tool Show, King of Prussia, Pa., Oct. 16-18, 2007

OPEN MIND to Demonstrate hyperMILL at CMTS

MSC.Software to Hold Conference Call and Web Cast

JETCAM to demonstrate new cutting CADCAM features at Fabtech 2007

ESPRIT 2008 by DP Technology at the Canadian Manufacturing Technology Show, Toronto, Ontario, Oct. 15-18, 2007

Daratech CEO Keynotes COADE Dealer Conference

GibbsCAM Demonstrated at Tornos Tech Days Event; GibbsCAM certified support for TB-DECO [a-line] machine tools to be demonstrated.

Official Call For Papers - STAR European Conference 2008

Indiana CAD Career Expo to be Held

MSC.Software Announces Keynote Speakers for 2007 EMEA Virtual Product Development Conference

Delcam to Show CADCAM at Composites Show

Get ahead with UGS TEAMCENTER Express -- Oct 11 - Nov 8 - Dec 14

PTC to Host Q4 and FY 2007 Results Conference Call and Webcast

Delcam to Show Five-Axis CAM Software

Platform Computing Webinar: Affordable High Performance Computing for Industrial Manufacturing

Beasy User Conference 2008 Call for Papers and Participants

Delcam to Exhibit at Euromold



Corporate Newsletters


Autodesk Manufacturing Community Update - September 27, 2007

SolidWorks Express - October 2, 2007

Metris Newsletter - October 3, 2007

Actify Newsletter - October 4, 2007



You can find the full MCADCafe event calendar here.


To read more news, click here.



-- Jeff Rowe, MCADCafe.com Contributing Editor.


Rating: