March 03, 2003
Virtual Prototyping and Simulation Market Poised for Significant Growth
Please note that contributed articles, blog entries, and comments posted on MCADcafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.


by Amy Rowell - Contributing Editor
Each MCAD Weekly Review delivers to its readers news concerning the latest developments in the MCAD industry, MCAD product and company news, featured downloads, customer wins, and coming events, along with a selection of other articles that we feel you might find interesting. Brought to you by MCADCafe.com. If we miss a story or subject that you feel deserves to be included, or you just want to suggest a future topic, please contact us! Questions? Feedback? Click here. Thank you!

Category 2002 (Est Sales and Service) 2003 Forecast
PLM Market $7.49 billion

(down 5% from 2001)
$7.84 billion

(up 5% from 2002)
Mechanical CAD/CAM $4.37 billion

(down 10% from 2001)
$4.51 billion

(up 3% from 2002)
Virtual Prototyping + Simulation $1.53 billion

(up 1% from 2001)
$1.64 billion

(up 7% from 2002)
Systems Performance Modeling $794 million

(up 8% from 2001)
$865 million

(up 9% from 2002)
Structural Analysis $725 million

(down 6% from 2001)
$766 million

(up 6% from 2002)
source: Daratech (2/28/03)


It may represent only a subset of the product lifecycle management (PLM) sector, but in the increasingly important area of
virtual prototyping and simulation, the growth opportunities are significant, with analysts estimating an average
annual
growth rate of 11.5% over the next five years to reach nearly $2.5
billion in 2007. In particular, systems performance
modeling (defined as the segment of the digital prototyping and simulation market that includes solvers plus pre-and
post-processors for CFD, crash, dynamics and motion, forging and mold design, durability and fatigue, heat transfer and
thermal interactions, NVH (noise, vibration, and harshness), and control systems design, as well as analysis optimization,
process modeling and results visualization) will enjoy vigorous growth of 14% annually over the next five years, topping
$1.4 billion in 2007, according to Daratech, the Cambridge, MA-based market research and technology assessment firm.


Factors driving growth in this breakout segment of the digital prototyping (CAE) market include: the pressures on
manufacturers to spend less on product development and shorten time-to-market by reducing physical prototype
counts. According to Daratech, also spurring investment in digital prototyping is the rapidly improving price/performance of
high-performance computers, together with better-quality deployment, implementation and training, as well as growing user
and management confidence in simulation accuracy and correlation with physical test results.


The bottom line? There's "money to be made and money to be saved" using the latest virtual prototyping and simulation tools,
particularly with respect to bridging the worlds of physical and virtual test. In this area, the companies to watch
include: MSC Software (which acquired market leader, Mechanical Dynamics, Inc. last year), LMS
International, ESI Group,
ANSYS Corp., MTS Systems Corporation, Fluent, Altair Engineering, and CFX (recently acquired by ANSYS
Corp.) as well as the
leading CAD/CAM, CAE PLM providers - IBM/Dassault Systemes, EDS-PLM Solutions, and PTC.


Interested in learning more? Mark your calendars for the upcoming conference,
daratechiDPS2003-- Intelligent Digital
Prototyping Strategies, currently scheduled for June 9-10, 2003 in Novi, MI.


Another valuable source of information about this topic is the online resource, SmartSim Community, launched by MTS Systems
Corporation, Mechanical Dynamics Inc. (MDI) and nCode International. Created in response to the automotive industry's demand
for accelerated vehicle performance evaluation, the SmartSim Community was established by its founders to research and
develop effective methods for sharing and using engineering data through integrated physical and virtual prototyping.


Comments? Feedback?
Email Contact to tell us what you think about this topic or if you have additional information you'd like to share on this subject!


Amy Rowell is the managing editor of MCADCafe, and the editor of MCAD Weekly Review.


p.s. This week, March 3-6th, 2003 MCADCafe will be attending the National Design and Engineering Show (NDES), in Chicago. So
stay tuned for important industry announcements and product news, as well as additional coverage and conference highlights.


Top Stories
  • Product and Company News
    • [


      Special Notices
      • Customer Wins
      • White Papers
      • Recommended Reading


        1 | 2  Next Page »


        You can find the full MCADCafe event calendar here.


        To read more news, click here.



        -- Amy Rowell, MCADCafe.com Contributing Editor.


        Rating:


        Review Article Be the first to review this article
        SolidCAM: Program your CNCs directly inside your existing CAD system.


        Featured Video
        Editorial
        Jeff RoweJeff's MCAD Blogging
        by Jeff Rowe
        Re-Use Your CAD: The ModelCHECK Handbook
        Jobs
        GIS Analyst II for Air Worldwide at Boston, MA
        Senior Structural Engineer for Design Everest at San Francisco, CA
        Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
        Upcoming Events
        Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
        Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
        Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



        Internet Business Systems © 2016 Internet Business Systems, Inc.
        595 Millich Dr., Suite 216, Campbell, CA 95008
        +1 (408)-337-6870 — Contact Us, or visit our other sites:
        AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
          Privacy Policy Advertise