Boeing 787 Dreamliner Makes International Debut

FARNBOROUGH, United Kingdom, July 18 — (PRNewswire) — The Boeing (NYSE: BA) 787 Dreamliner made its international debut landing at the Farnborough Airport at 9:09 a.m. (local time) in support of the Farnborough International Airshow that begins Monday.

"It's an honor to showcase the 787 here at the Farnborough Airshow," said Scott Fancher, vice president and general manager of the 787 program, Boeing Commercial Airplanes. "I can't think of a finer stage on which to present this highly anticipated airplane."

This is the first international trip made by a Boeing 787 Dreamliner. The airplane came via nonstop flight to Farnborough, U.K., from Seattle.

"We took advantage of the flying time to conduct some flight testing on the way," Fancher said. "We're taking every opportunity to complete our testing requirements when we fly."

The 787 Dreamliner is built by an international team and will provide airlines around the globe with a new level of efficiency in operations, with a 20 percent reduction in fuel use when compared to similar-sized airplanes. The 787 also brings a new level of passenger comfort to travelers including bigger windows and more personal space as well as an environment designed to help them arrive at their destinations feeling refreshed.

Boeing executives and members of the board of directors, dignitaries from the United States and U.K. and a wide variety of media were on hand to welcome Captains Mike Bryan and Ted Grady as they stepped off the airplane and welcomed visitors aboard. About a dozen people traveled on the airplane to conduct testing during the flight.

Fancher and other Boeing executives will provide a media briefing on the 787 at the airshow's main press chalet at 10 a.m. (local time). The airplane, referred to as ZA003, will depart Tuesday afternoon, July 20.

Contact:

Lori Gunter, 787 Communications, +1-206-931-5919

Photos and captions are available here: http://boeing.mediaroom.com/

SOURCE Boeing

Contact:
Boeing
Farnborough International Airshow
Lori Gunter, Boeing 787 Communications
Phone: +1-206-931-5919
Web: http://www.boeing.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise