Chrysler makes Move to Siemens NX

David Prawel
President
Longview Advisors

June 24, 2010
- It has often been said to be careful of the doors you open. In recent years, I and many others have loudly discussed the huge cost of getting product data from V4 to V5. Dassault cannot imagine the problem they cause for themselves and, more importantly, for their customers, by not playing nicely vis a vis other product data formats.

Read about Chrysler's engineering software shift.

In the 2009 Collaboration & Interoperability Market Report (free PDF available here), there were a few very notable results from our survey, regarding Dassault's attitude with respect to interoperability, such as:

- "Our impression from speaking with many users over the year is that Dassault continues to be the least cooperative of CAD vendors with respect to helping their customers successfully share their product data in STEP or other non-CATIA data formats."

"We asked respondents if they are currently involved in CAD migration projects. Huge amounts of money continue to be invested in migrating CAD data be-tween CAD platforms. Nearly 15% of respondents are currently migrating CATIA V4 data to CATIA V5, ap-proximately the same number as last year. This en-deavor continues to represent a huge investment be-ing made across the discrete manufacturing indus-tries. And it approximates the total amount of migra-tion going on for all other CAD platforms. Over 20% of respondents report migration projects between non-CATIA CAD platforms or versions. About 23% of respondents report engagement in a migration project to switch CAD systems. This is a huge in-crease over past years. Forty-four percent of respon-dents are not currently involved in a migration pro-ject, which is lower than last year, perhaps due to budgetary delays in the poor economy. The ―Other‖ category also provides some interesting insight. A few of ―other‖ comments were from respondents in-volved in a migration away from CATIA V5 to an-other vendor (mostly to NX). And one interesting comment indicated a migration from four different CAD systems to Solidworks."

Dassault gave everyone a chance to consider a new solution altogether, and they're doing it big-time. When a company gets too focused on it's own agenda to listen to it's customers, no matter how high it may be flying at the time, it will come down.

Email Contact


Rating:


Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise