Delcam to show CADCAM power and precision at SEMA

October 14, 2011 - Delcam will demonstrate the power and precision of its range of design and manufacturing software at the SEMA Show to be held in Las Vegas from 1st to 4th November.  Delcam software is already used by many of the autosport industry’s leading manufacturers to help them maximise quality and reduce lead times, both essential requirements for suppliers in this demanding sector.

One successful customer is MBE Cylinder Heads and Manifolds, which uses Delcam’s PowerSHAPE design software and PowerMILL machining program.  To see how, watch the Delcam TV video on http://www.delcam.tv/mbe.

The software has helped to make MBE a trusted choice for leading race teams and engine builders throughout the United States, Australia and Canada.  Customers include teams from dirt racing and drag racing, as well as competitors in tractor- and truck-pulling events.

MBE’s head programmer Mark Olson admitted, “It amazes me what the Delcam programs can do.  I’ve used a lot of programs in my career (which began in 1970) and this is the smartest software that I’ve ever used.  PowerSHAPE has a great, powerful surfacing engine.  I haven’t yet found anything as good as PowerSHAPE to manipulate surface data into exactly the shapes that I need.”

“PowerMILL has a very powerful automatic porting routine,” Mr. Olson said.  “This was one of the major reasons why we purchased it.”  Despite clearances as little as 15/1000ths of an inch, Mr. Olson says he’s never had any interference or a collision using PowerMILL.  “No matter how complex the shape, I can be confident it will cut the port right first time,” he claimed.

While PowerMILL has proved popular with engine manufacturers, companies manufacturing aftermarket parts tend to prefer Delcam’s FeatureCAM feature-based machining software.  They find the speed and ease-of-use of the system ideal for experimenting with new ideas and then producing parts once they have settled on the design.

Jeremy Cupp, owner of LC Fabrications, a custom bike builder in Virginia, likes being able to visualize how parts will look on the software.  “It saves a lot of expense compared with spending half a day making the part and throwing it in the trash can if I don’t like the way it turns out,” he said during his Delcam.tv interview, located at www.delcam.tv\lcfabrications.

“FeatureCAM drastically reduces the amount of time it takes to make a part,” he added.  “I can usually go from a concept to a finished part in an afternoon instead of taking several days.  It means I can produce designs that I could only dream about before.”

 

For further information on Delcam’s CADCAM software, please contact:-

Peter Dickin, Marketing Manager

Direct phone: 44 (0)121 683 1081                  e-mail: Email Contact

Delcam plc                                                                 

Small Heath Business Park,                                       

Birmingham, B10 0HJ, UK

www.delcam.com




Review Article Be the first to review this article


Featured Video
Jobs
Mgr Mechanical Engineering 2 for Northrop Grumman at Melbourne, FL
MECHANICAL ENGINEER for Peter R. Thom and Associates at ORINDA, CA
Senior Design Engineer for Kaman at Gilbert, AZ
Sr. Mechanical Engineer for Kateeva at Newark, CA
Upcoming Events
Solidworks World 2017 at Los Angeles CA - Feb 5 - 8, 2017
Design & Manufacturing at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise