New WiBox™ 1.5 Wireless MDC/DNC Released (Spectrum CNC Technologies™)

 New Machine Data Collection and Bi-Directional Machine Communication Device Features Fastest Signal Capture Intervals in the Industry

 

Corona, California, December 4, 2013

Spectrum CNC Technologies™ today announced the release of its newest WiBox, wireless (or wired) machine data collection and bi-directional CNC machine communication device.  The new WiBox 1.5 supports all the features of its predecessor with one very distinct improvement; it is capable of capturing machine signal intervals as small as 1 millisecond.  This represents a 100 fold speed improvement and positions the new WiBox as the fastest signal capture device available today for machine monitoring.

“WiBox 1.5 is an important breakthrough for high volume, rapid cycle manufacturing, said Toni Novak, President of Spectrum CNC Technologies.  “In order to provide accurate machine monitoring you must be able to capture every signal, no matter the interval.  In high volume, rapid cycle manufacturing, problems and inefficiencies that may only cause a fraction of a second delay can add up quickly.

WiBox features true integration of Multi-DNC software coupled with state-of-the-art communication hardware.  Multi-MDC/Monitoring is a browser based real-time machine monitoring system that automatically collects machine output data to an MS-SQL database.  Real time dashboards and production reports display shop floor manufacturing data including OEE, cycle, alarm, spindle, tool usage, idle, setup, teardown, machine downtime and more.

With its wireless and wired capability, WiBox provides shop owners the flexibility to easily network 250+ machines, add or remove machines, or reconfigure their shop floor without the need to run cable.  Other features include:

  • High data rates over long distance IEEE 802.11 b/g support
  • Data Security WEP/WPA/WPA2/TKIP encryption
  • Bi-directional wireless CNC machine communication and machine monitoring, eliminating costly cabling
  • Ability to assign each CNC machine its own IP address
  • Industry standard IEEE 802.11 b/g wireless interface
  • Data Encryption 128-256 bit
  • Supports Wireless or Wired Ethernet
  • Powered off the CNC control – no need for 110v at every machine
  • Two standard DB-9 RS-232 ports – surge protected
  • Flow Control – software XON/XOFF and hardware RTS/CTS
  • Supports special protocols such as Mazatrol CMT and Fagor DNC

WiBox and Multi-DNC/Monitoring software is available through Multi-DNC dealers.  For more information contact Multi-DNC at 877.882.6362, www.multi-dnc.com

Established in 1989 Spectrum CNC Technologies revolutionized the CNC machine tool industry with the first completely software based machine tool communications system, Multi-DNC.  For 24 years the Company has continued to develop innovative products and services to help machine shops and manufacturers be more productive. Hardware and software solutions include WiBox machine communications, Multi-DNC software, Machine Monitoring and Job BASE document management systems.

# #

Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise