U.S. Manufacturing -- An Updateby Jim Altfeld
In last week's issue of MCAD Weekly Review, we published a guest commentary by Jim Altfeld that explored some of the issues and concerns facing U.S.-based manufacturers as they struggle to compete in a global economy. This week, Jim gives us an update.
Well, apparently the first shot has been fired by the Bush administration. The China North Industries Corp. (NORINCO) has been banned from importing anything into the US for two years. The Bush Administration found that this major Chinese industrial conglomerate had been selling missile parts to Iran. According to the State Department, Norinco sold parts for ballistic missiles to the Shahid Hemat Industrial Group, an Iranian producer of medium and long range missiles. The State Dept. went on to say that these parts were sent in October, clearly two months after the Chinese government had been issued an edict banning the sale of such products to Iran. Norinco began as a provider of tanks, machine guns and other weapons. They have since diversified and now produce more than 40,000 products, including light industrial goods, electronics, textiles, handicrafts, motorcycles and guns. China exports in excess of $100,000,000 worth of products to the US annually. Apparently this is the first time that a state-owned company has been issued a blanket sanction on its entire product line. Is this just the first of many? Perhaps, but perhaps not. We'll have to wait and see.
I have done a lot more investigating as to what is or is not going on with China. Turns out that there is not just one, but several groups all worried sick about the U.S. losing its manufacturing base. These include: (Save American Manufacturing) www.SAMNOW.com, NAM (National Association of Manufacturers) www.nam.org, the National Coalition for Manufacturing Leadership, the Manufacturing Coalition, and more. However, everyone seems to be running hither and yon yelling the sky is falling. There is no one spokesperson, and there needs to be. Former GE CEO Jack Welch was my first choice, but he declined the offer. Other suggestions?
On Monday, July 7th, the Dept. of Commerce held a roundtable discussion at the Davidson Conference Center at USC (University of Southern California) to discuss the problems of manufacturing in California. Nearly 100 small to mid-size manufacturers attended, as well as a number of heads of manufacturing associations. It was standing room only. In short, National Director of the US Dept. of Commerce's Minority Business Development Agency, Mr. Ronald Langston, received an earful. The two primary complaints were "give us a level playing field" and "give us access to capital." No one in attendance was either shy or bashful about how they felt. There was passion, zealousness and anger.
A number of key points were made, including:
- U.S.-based manufacturers are forced to deal with high operating costs due to city, state and federal regulations and mandates when the rest of the world does not.
- Higher operating costs equates to fewer workers, higher unemployment, lower profit margins, less working capital, poor cash flow, and downsizing. Which part of that don't you get?
- U.S.-based manufacturers have limited access to cash. What a manufacturer has to do to get an SBA loan is ridiculous. We are competing with foreign countries using the latest machinery and equipment with the cheapest labor pool. Without easier access to low-interest loans, a U.S.-based manufacturer cannot buy the machinery and equipment it needs to compete
- Unfair tariffs favor those companies importing to the U.S. I pay 60% going out and they pay 2% coming in. What sense does that make?
Jim Altfeld has over thirty years of experience as an industry marketing and sales professional in the manufacturing sector, with a key part of his career spent at GE Plastics. He is also a successful author and business consultant who is dedicated to preserving the future of U.S.-based manufacturing. Write to Jim at: firstname.lastname@example.org.
Comments? Feedback? Tell us what you think about this topic or if you have additional information you'd like to share on this subject. To join the discussion, click here!
commentary: Testimony Before the Committee on Small Business of the House of Representatives On Behalf of U.S. Manufacturers [15 Jul 2003]
- Leading Product Lifecycle Management (PLM) Analyst Names Market Leader In Computer-Aided Manufacturing (CAM) Software and Services [16 Jul 2003]
- 3D Systems Corp. Announces Q1 2003 Results [15 Jul 2003]
- 3D Systems To Resume Trading Under TDSC Symbol Effective July 21, 2003 [17 Jul 2003]
- 3Dconnexion Introduces Ultra Compact Motion Controller [14 Jul 2003]
- A Visionary Way to Improve Utilization of Unigraphics NX [18 Jul 2003]
- ACUITIV Takes CFD Visualization Software to the Next Level [15 Jul 2003]
- Altair Engineering to Deliver Robust Wire Harness Design Solution for CATIA V5 Community [15 Jul 2003]
- CAD-Driven Quality System Launched by New IQS, cSHARE Partnership [15 Jul 2003]
- Cimatron Customer "OTICON" Wins Prestigious European Company of the Year Award [15 Jul 2003]
- Cimmetry Ships AutoVue 17.1 [15 Jul 2003]
- Dassault Systemes' PLM Skills Initiative Creates Global Education Program for Product Lifecycle Management [17 Jul 2003]
- Delcam offers free upgrade training for PowerINSPECT inspection software [18 Jul 2003]
- DSM Desotech and Vantico A&T Reach Patent Dispute Settlement Agreement [16 Jul 2003]
- IBM Reports 2003 Second-Quarter Results [16 Jul 2003]
- Leading PTC Reseller Expands its Activities into the Quebec Market [16 Jul 2003]
- Magics Tooling Expert 2.0 Software for Mould Analysis and Quoting: Simply the Best! [15 Jul 2003]
- Mastercam Router Version 9 Unveiled [17 Jul 2003]
- Matereality Launches Materials Data Delivery Service [11 Jul 2003]
- Metris Announces the LC15, the New Standard for High Resolution 3D Laser Scanning [17 Jul 2003]
- MSC.Software Announces Release of MSC.ADAMS 2003 [15 Jul 2003]
- New Fluid Flow Software Release Offers Full CAD/CAE Associativity and Expanded Analysis Capabilities [15 Jul 2003]
- Product Data Management (PDM) Industry Veteran Carozza Joins think3 as Director, PDM Marketing [17 Jul 2003]
- Product Sight Corporation Acquires Findview Enterprise Search Engine for Engineering and Manufacturing Content [16 Jul 2003]
- Roland Bundles VisualMill CAM Software with SRP Devices [17 Jul 2003]
- SAP Reports 2003 Second Quarter and Six Months Results [17 Jul 2003]
- STEP Tools, Inc. Partners with SoftInWay, Inc. as Subcontractor [15 Jul 2003]
- Alias/Wavefront Celebrates 20th Anniversary and Announces Name Change to Alias [17 Jul 2003]
- Arena Solutions Awarded Start Magazine's "Hottest Companies" of 2003 [14 Jul 2003]
- Boeing Announces Partners for Fuel Cell Demonstrator Airplane Project [11 Jul 2003]
- ESI Group Announces EuroPAM 2003 in Mainz, Germany, October 16-17 [18 Jul 2003]
- Experience Pro/ENGINEER Wildfire at Hands-On Workshops for New & Veteran Users [15 Jul 2003]
- Graphics Systems to host Second Annual Midwest SolidWorks User Conference in Lake Geneva, WI [15 Jul 2003]
- INCAT® helps organize, launch new Motor City Autodesk Inventor. User Group [17 Jul 2003]
- New CADKEY Magazine Makes its Debut [15 Jul 2003]
- Solid Edge Launches New "Evolve to 3D" Program [15 Jul 2003]
- Tecnomatix Again Named a 'Top 100' Manufacturing Software Company by MSI Magazine [17 Jul 2003]
- B.A.T. Machine Picks Pro/ENGINEER Wildfire for Superior Surface Design, Manufacturing Integration [17 Jul 2003]
- Delcam helps leading footwear company satisfy difficult demands [14 Jul 2003]
- EDS Software Grant Expands Career Opportunities for Students at State University of New York at Buffalo (UB) [17 Jul 2003]
- Koito Manufacturing Cuts Product Development Time with Product Lifecycle Management Solutions from IBM and Dassault Systemes [18 Jul 2003]