COSMOS has released COSMOSDesignSTAR Version 4.5, which includes 3D nonlinear contact analysis, support for motion controllers from 3Dconnexion, support for the XML material library format, and analysis support for the newest versions of Solid Edge, Autodesk Inventor, SolidWorks, and CATIA.
COSMOSDesignSTAR 4.5 Released With Wide MCAD Support
The new availability of 3D nonlinear contact analysis eliminates limitations caused by using static studies to solve contact problems, and provides users with a number of benefits.
"Engineers can now easily solve problems that require analysis of material nonlinearity coupled with contact -- such as an O-ring seal simulation -- within the COSMOSDesignSTAR interface," says Ramesh Ramalingam, Product Manager for COSMOS. "With reference to the same example, users can simulate the hyper-elastic behavior of the O-ring as it becomes compressed upon contact with bearing surfaces."
The new release of COSMOSDesignSTAR has a thermostat mechanism that can control all heat, power, and heat flux assignments for transient thermal analyses, and users can employ multiple thermostats at different locations. In addition, the new version enables engineers to apply different initial temperatures to different components in an assembly when performing transient thermal analyses.
COSMOSDesignSTAR 4.5 supports the popular motion controllers CadMan, SpaceBall, SpaceMouse, and SpaceTraveler from 3Dconnexion. The controllers operate together with a traditional mouse to provide a very ergonomic and intuitive way to work with 3D geometry. Instead of using a "normal" mouse with one hand as an input device for all activities -- including zoom, pan, rotate, select, and click on icons and menus -- users of 3Dconnexion's motion controllers can use one hand to move and rotate the part or assembly, and see CAD models and analysis results from all sides and angles, while using the other hand to perform all the normal selection tasks with the mouse.
The new release also features a Task Scheduler, designed to make it easier to run COSMOSDesignSTAR studies in batch model. The new utility makes it possible for users to schedule the meshing and analysis of up to 10 models. The Task Scheduler enables engineers to run all defined studies, or any specified one, either immediately or on a delayed basis.
Sara Phillips, mechanical project engineer, EMS Wireless, Norcross, Ga., has used COSMOSDesignSTAR in designing transmission antennae for cellular phone service. She and her team performed linear static, natural frequency and linear heat transfer analyses. "COSMOSDesignSTAR met our needs in each of these areas," says Phillips.
In particular, she says that the software helped the designers to optimize wall thickness as well as cross-sectional areas at the corners of the structure to make certain that the entire structure would support the wind load.
"It was especially important to do 'what if' analyses on this model," she says. "When COSMOS results show that we have a good model, we have confidence in the design. And, by the time we develop the actual product, we're certain the piece is robust."
COSMOSDesignSTAR helps design engineers and expert analysts alike detect potential design problems quickly and correct them before beginning prototype production, saving companies the time and expense of post-production fixes. By conducting multiple "what if" studies, design engineers can determine the reliability of their designs quickly, shorten design review cycles, and reduce the number of physical prototypes that need to be tested. COSMOSDesignSTAR is currently in use in some 2,000 companies.
COSMOSDesignSTAR now supports Solid Edge Versions 15 and 16, Autodesk Inventor Versions 8 and 9, SolidWorks 2005, CATIA V5, Rev. 2-13 (*.CATProduct and *.CATPart). COSMOSDesignSTAR also supports Parasolid up to version 16, ACIS up to Rev. 13, and other CAD formats via STEP and IGES.
Jack Van Heest of Aromech, Inc., Holland, Mich., design consultants who use SolidWorks, Autodesk Mechanical Desktop, Pro/Engineer, and Unigraphics CAD systems, says that he uses COSMOSDesignSTAR because, "it's very flexible, works with all the CAD programs our customers require us to use, and can handle many different kinds of problems."
I consider COSMOSDesignSTAR to be the big brother (or sister, depending on your sibling gender preference) of COSMOSWorks, COSMOSMotion, COSMOSFloWorks, and other COSMOS products. All are being used earlier in the product development process and this is a good thing, primarily because they, along with competing analysis products, are used to reduce the number of physical prototypes required as a product is developed. This can reduce both time to market and cost, sometimes quite dramatically. Also, once the province of analysis specialists (many with PhDs), these analysis and simulation applications are increasingly finding a home on the desktops and in the toolboxes of mere mortal designers and engineers. What this all means is that analysis and simulation are becoming mainstream processes and are being thought of as integral to the overall product development process, and not just an afterthought or "if time allows."
Probably one of the biggest functional enhancements to COSMOSDesignSTAR 4.5 is its 3D nonlinear contact analysis that minimizes or eliminates limitations caused by using static studies to solve contact problems.
Below are some of the highlights that we think add to COSMOSDesignSTAR's utility:
- A sketching tool that lets you create 2D profiles and use them to split the face of a solid or create 2D surfaces.
- COSMOSDesignSTAR provides a method for solving thin, thick extrusions, and solids with an axis of revolution by using 2D analysis.
- A mesh failure diagnostics tool locates and resolves meshing problems. It highlights the faces that failed to mesh and also suggests steps to troubleshoot the problem.
- For assemblies with large size differences between parts, COSMOSDesignSTAR can automatically set appropriate element sizes for different parts.
- In case of mesh failure on the first pass, COSMOSDesignSTAR automatically attempts to mesh a model multiple times with different element sizes. You can control the number of loops and the change in element size.
- COSMOSDesignSTAR can employ remote loading where you can ignore certain components in an assembly, but consider their effects on the rest of the assembly
- COSMOSDesignSTAR supports rigid connection restraint that helps to connect two disjoint parts in an assembly.
- Shrink fit simulates the effect of fitting one component inside a slightly smaller cavity. It calculates the amount of shrinkage or expansion and the associated stresses.
- The linear static module supports large displacement contact that helps the user to solve parts separated by large gaps.
- COSMOSDesignSTAR lets you superimpose deformed shapes with results on the original model. The original model can be displayed with different levels of transparency.
- COSMOSDesignSTAR can explode individual parts of an assembly with several view options.
Jeffrey Rowe is the editor and publisher of MCADCafé and MCAD Weekly Review. He can be reached here or 408.850.9230.
This WeekTop Stories
- IronCAD Selected By Skyline Displays ForIts New Made-To-Order 3D Design Solution
- COSMOS Helps Global Medical Equipment Industry Put Cutting-Edge Technology On The Market Quickly
- Pathtrace Announces Support For SolidWorks 2005
- MatrixOne Sponsors Online Consumer Product Development Conference
- Gibbs and Fanuc Collaboration Leverages Controller Capabilities
- SMBs Think Big With CoCreates OneSpace.net Project Collaboration
- MSC.Software Partners With Brembo To Improve Virtual Product Development Tools For Brake Systems
- LMS Test.Lab Selected By PSA PEUGEOT CITROKN As New Standard Solution For NVH Testing
- PolyJet Sales Up As RP Process Gains Acceptance
- New Geomagic Qualify 7 Software Adds Major GD&T, Turbine Blade Analysis Features
- ICAM and Makino Sign Strategic Marketing Agreement
- Ferro Implements Sopheons Product Development System
- Journey Publishing Teams With PTC To Offer Pro/ENGINEER Wildfire 2.0 Student Edition
- Licom Selects Component Software From D-Cubed To Enhance Productivity For Users
- The MathWorks Introduces RF Design and Simulation Products for MATLAB and Simulink
- Delcam Opens Branch Office In Middle East
- SURFCAM 2004 Supports Autodesk Inventor 8.0 CAD Models
- Alcan Selects I/Gear
- Missler Software Announces New Polish Partner
- Delcam To Launch New Jewelry Design And Manufacturing Software In Asia
- TopSolid Mold 2005 To Launch In Q4 2004
- Survey of CAD and PLM Software Developers Shows Interest in Chinese and Indian Markets
- Manufacturing Exodus Squeezes Industrial Distributors Says New Survey
- SYSPRO Customers Nominated For Manufacturer Of The Year
- PRO-TEC Coating Company Earns International Automotive Quality Recognition - ISO/TS 16949
- MicroCAD Becomes New Englands Premier Autodesk Training Center
- AppWorx Announces SAP Certification
- Tower Automotive Accelerates Program Launches With Activplant Manufacturing Intelligence
- RuleStream Honored Alongside NASA ByCleveland State University
- Customer Adoption Of QAD Lean Manufacturing Solution Gains Momentum
- Compuware Covisint Lowers The Cost Of Doing Automotive Industry Business With Two New Services
- Graphics Systems Welcomes Christopher Schaefer To Its Technical Services Team
- Delcam Appoints Business Development Manager For PowerINSPECT
- INCAT Announces New Canada Regional Manager
- ImpactXoft Announces September East Coast 3D Mobility Seminars
- ICEM Sets Out On Road Show Featuring Comprehensive New Software Solutions
- Moldflow Hosts First International User Group Conference In Asia
- Area Students To Discover The Attraction Of Manufacturing Careers
- ANSYS To Present At SG Cowen 32nd Annual Technology Conference
- Adept Technology To Host Automation Conference At Assembly Technology Expo
- Durability & Fatigue Expert To Visit U.S. For Seminar Series