Delcam launches 64-bit PowerINSPECT inspection software


----------------------------
PowerINSPECT can now shade point clouds to simplify manipulation of this type of data

June 23, 2011 --- Delcam has launched the first version of its PowerINSPECT inspection software for use on 64-bit computers.  Other enhancements in the 2011 R2 version include improved visualisation of the results, easier creation of automated inspection routines, full integration of DRO (Digital Read-Out) functionality and support for the latest Renishaw probes.

PowerINSPECT is firmly established as the world’s leading hardware-independent inspection software.  It combines the ability to work with all types of inspection devices with a comprehensive range of inspection routines for making simple measurements, for inspecting geometric features and for checking complex surfaces.  The resulting reports present detailed information in easy-to-read formats that can be understood by all engineers, not just inspection specialists.

The introduction of support for 64-bit computers will enable increased memory use on that hardware.  This will be of benefit for more memory-intensive applications where larger CAD files need to be manipulated, especially for very complex parts and multi-component assemblies.

Two developments will make it easier to see results from PowerINSPECT.  Firstly, dimensions can now be displayed on the CAD view to give clearer reporting for distances between features.  Secondly, point cloud data can now be shaded.  This gives an immediate impression of the shape of the scan and allows the user to see at a glance whether sufficient data has been collected.  It will also make it easier to select key points or specific areas from within the cloud of data.

The initial 2011 release of PowerINSPECT added the ability to create automatically a grid of points for an inspection routine.  The R2 version also allows automatic generation of probe paths from curves in CAD models.  The spacing of the measurement points is set to match the control points on the curve.

The PowerINSPECT DRO (Digital Read-Out) enables users to view the XYZ coordinates of the measuring device and is a useful tool for ‘marking out,’ or copying required coordinates onto a part.  This is a common task with clay models and is usually achieved with a point probe or scriber on a layout machine.  The DRO previously had to be installed alongside PowerINSPECT as a standalone program but the new release allows it to run inside PowerINSPECT.  This makes the process more seamless and allows the user to take advantage of PowerINSPECT’s alignment functions.

In keeping with Delcam’s philosophy of supporting the latest probing technology, PowerINSPECT can now accept data collected with Renishaw’s new PH20 probe.  This combination allows measurements to be made across all probe angles, rather than simply the incremental angles offered previously.  It also introduces the ability to make rapid ‘head touch’ moves, which use the rotary motion of the probe head to collect the points quickly and accurately, rather than moving the entire machine.

CONTACT INFORMATION




Review Article Be the first to review this article
Rand3D

Featured Video
MCAD Corporate Newsletter
rss feed
Jobs
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise