Utah Design Team Uses SolidWorks to Create Skeleton Sled for Olympic Racer in Record Time and for Thousands Less Than Standard Design

World Cup Champion Noelle Pikus-Pace Turns To Local Metal Shop – And Her Husband – For Innovative New Sled

CONCORD, Mass. — (BUSINESS WIRE) — February 16, 2010 — A Utah design team used its metalworking experience and SolidWorks® CAD software to create a skeleton sled for an Olympic racer in a fraction of the time and for tens of thousands of dollars less typically required to produce one of the highly specialized sleds.

A skeleton sled is a compact racing vehicle that riders steer down high-speed ice tracks by flexing and shifting their bodies. Suddenly without a working sled late last year when hers was damaged, U.S. Olympic team member, 2005 and 2007 World Cup champion Noelle Pikus-Pace, turned to her husband, Janson Pace, and his employer. Janson Pace is an industrial designer at Salt Lake City-based NuQuest, a design, engineering, and manufacturing company. SolidWorks software helped NuQuest designers apply their experience producing industrial equipment, such as electrical control boards and equipment skids, to the highly specialized task of producing an Olympic-regulation skeleton sled.

“With SolidWorks, we were able to predict a lot of results that otherwise would have taken years of trial and error,” said Janson Pace. “SolidWorks Simulation let us test the sled’s strength, the loads it would have to bear, and the right materials to use so it wouldn’t buckle or deform. We modeled all the parts in SolidWorks, did the simulations, then modified them. The first physical model we produced fit together so well – because of SolidWorks’ ability to model parts properly and produce accurate drawings for the machine shop – that it was ready for Noelle to use. We didn’t have to prototype.”

The result of NuQuest’s innovation is a skeleton sled that meets Olympic requirements but departs from many sled design orthodoxies, Pace said. Skeleton racing is outwardly similar to the luge, except racers go down the tracks face-first instead of feet first. Skeleton sleds consist of a fiberglass “pod,” metal chassis and two “runners,” or blades. Most sleds are welded together, but the NuQuest sled is bolted. That makes it easier to switch out damaged or malfunctioning parts without subjecting the sled’s frame to heating and deforming. SolidWorks also enabled NuQuest to experiment with different materials to make the sled faster, where international competitions’ rules allowed.

NuQuest produced the sled in four months, which is years less than it usually takes to perfect a new design. NuQuest co-owner Troy Beckstead estimated that SolidWorks Simulation saved the company “tens of thousands of dollars” in development costs. Pikus-Pace will use the skeleton sled at the Vancouver Olympics. She was the first American woman to win the skeleton racing World Cup, and also won world championships in 2007.

“NuQuest had the skills and knowledge to create the sled even though it was very different from the products they normally design. All they needed was the right environment for testing new ideas to ensure they would work in the real world. That’s exactly what we want SolidWorks to be to them – a catalyst for their innovation,” said SolidWorks Vice President of Marketing Christine Washburn.

NuQuest works with authorized SolidWorks reseller Go Engineer for ongoing software training, implementation, and support.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions that help millions of engineers and designers succeed through innovation. Our products deliver an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site ( www.solidworks.com) or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks, and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other brand and product names are trademarks of their respective owners. Copyright © 2010 Dassault Systèmes SolidWorks Corp.


Dassault Systèmes SolidWorks Corp. Press Contacts:
Dassault Systèmes SolidWorks Corp.
Nancy Buchino, 978-318-5262
Email Contact
Beaupre & Co. Public Relations
Darby Johnson, 603-559-5809
Email Contact

Review Article Be the first to review this article

Featured Video
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
System Designer/Engineer for Bluewater at Southfield, Michigan
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Upcoming Events
Live SOLIDWORKS Event Hosted by Converge at 2482 Patterson Rd Unit 2 Grand Junction CO - May 22, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
SolidCAM: Break the Chains

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise