East Coast Design & Manufacturing Trade Event Showcases New-to-Market Technologies; Co-located Shows Serve as Total Resource for Design, Manufacturing, and Packaging

MD&M East 2003

EastPack 2003

Atlantic Design & Manufacturing 2003

LOS ANGELES--(BUSINESS WIRE)--May 8, 2003--Product managers, engineers, R&D specialists and manufacturing professionals looking for the latest products and services are invited to attend the east coast's largest design and manufacturing event, June 2-4, in New York's Javits Convention Center. The co-located shows, which include Medical Design & Manufacturing(R) (MD&M) East, EastPack(R), and Atlantic Design & Manufacturing(R), will feature eight expanded product pavilions and a host of new-to-market products and services.

More than 1500 companies have signed on to exhibit at the co-located shows, many of which have planned to introduce new technologies and services. The following list is just a few of the various products featured at the show:

Asahi Intecc Company Ltd. Booth 3010

Asahi Intecc Company, a manufacturer of precision medical components and assemblies for medical OEMs, offers ACTONE Asahi cable tube, a new type of stainless steel cable-like tube that consists of multifilar wires. The smallest outside diameter is 0.012 in. A variety of sizes are available. Some features of ACTONE Asahi cable tube include high-torque transmission, low elongation, and straightened, kink-resistance, and tube structure. Flexibility of ACTONE is in-between a conventional stainless steel hypotube and a conventional stainless steel coil. Applications include guidewires, a control cable for an endoscope, PTCA catheter shaft, and more.

CYRO Industries Booth 2221

CYRO Industries, leading provider of acrylic-based molding and extrusion compounds, is featuring CYROLITE(R) Med 2 acrylic-based multipolymer compound with a superior new level of alcohol and lipid resistance. CYROLITE Med 2 exhibits good impact resistance and ductility, improved clarity over the 1st generation product and retention of properties on sterilization under gamma irradiation and ethylene oxide. CYROLITE Med 2 has excellent processability and can be readily injection molded into thin-walled and difficult-to-mold parts in multicavities. It is designed specifically for medical device applications requiring maximum chemical resistance to isopropanol and lipids.

Delta Industrial Services Booth 2339

Delta Industrial Services, an ISO 9001 certified designer and manufacturer of web handling and packaging systems, will be demonstrating a unique web converting and packaging system. The Delta Crusader(R) Converter features 6 axes, each individually servo driven. The demonstration will show the flexibility and unique capabilities of this modular based system. Pre-printed web will be diecut with registration, island placed, bull nose transferred into the heat seal packager and sheeted.

FeatureCAM / Engineering Geometry Systems Booth 1264

Engineering Geometry Systems, developer of FeatureCAM CAD/CAM software, will be extending their CNC programming technology to include user-defined features (UDFs) as part of FeatureCAM Version 10. Feature-based programming is faster than operations-based programming because the features contain all of the necessary programming information. Features define the shapes used as building blocks for parts. Once a part's features are defined, FeatureCAM automatically selects the tools, calculates the feeds and speeds, generates efficient toolpaths and creates the NC code.

HYTEC Inc. Booth 3030

HYTEC will offer the first cost effective, easy to use, 3D x-ray scanning system for rapid prototyping, mass customization, and product inspection. The FlashCT is an affordable, high-speed, user-friendly, x-ray computed tomography (CAT Scan), 3D imaging system used in manufacturing and inspection of implantable and prosthetic medical devices, and for in-line manufacturing of orthodontic appliances and dental prosthetics direct from original impressions or plasters. The FlashCT offers outstanding image quality, while supporting most file formats.

Lytron Inc. Booth 1964

Lytron will begin selling its Thermocube(TM) recirculating chillers, manufactured by Solid State Cooling Systems, throughout the United States and Canada. The Thermocube is a compact, quiet, CFC-free recirculating chiller which uses thermoelectric modules to precisely control, +/-0.15 degrees C, the temperature of a fluid (typically water or water/ethylene glycol mixture). This fluid is used to stabilize the operating temperature of equipment such as digital X-ray plates or to remove excess heat from lasers and other devices. Typical applications include medical equipment, analytical instruments, electronic components, power supplies, electro-optics, and electrophoresis gels.

Manan Medical Products Inc. Booth 2839

Manan Medical will introduce its new unique "TIP TRAP" safety needle device, designed for vascular access and long style biopsy needles. The "Tip Trap" device will be offered as an option on needles purchased from Manan or as an OEM accessory. The "Tip Trap" has been designed with a special transfer and loading system making the device adaptable to a variety of needle products.

Rubbercraft Corp. Booth 1656

Rubbercraft, a Sanders Industries Company, will be showing its new and existing line of custom integral environmental, EMI, RFI, and ESD seals and gaskets for the medical, communication and commercial industry. These seals excel in areas where moisture and high electronic noise is common, such as cellular phone base station enclosures, amplifiers, and switching equipment. These integral seals and gaskets are precision molded or extruded elastomers with both metal and fabric impregnation, Teflon skin, and combinations of elastomers to meet all environmental and EMI requirements. These seals and gaskets can be molded-in-place prior to delivery.

In addition to the expanded expositions, both MD&M East and EastPack will feature enhanced conference programs covering topics such as Medical Packaging Design, Materials Selection and Evaluation for Medical Devices, and Successfully implementing HUD Blister Pack Bar Code using Current Inline Flexographic Printing Systems.

Produced and managed by CANON COMMUNICATIONS LLC, the New York event is part of the company's worldwide family of trade shows. For more information, please visit www.canontradeshows.com or call 310/445-4200.

CONTACT: Canon Communications LLC
             Kristen Klasey, 310/996-9497
Email Contact

Review Article Be the first to review this article

Featured Video
Director of Process Engineering. for Tekni-Plex at Toledo, OH
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, PA
System Designer/Engineer for Bluewater at Southfield, MI
Project Manager for Keystone Aerial Surveys at Philadelphia, PA
GIS Specialist for Fresno Irrigation District at Fresno, CA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Upcoming Events
Manufacturing in America 2018 at Ford Field 1902 St. Antoine, Detroit MI - Mar 14 - 15, 2018
ACE 2018 Conference at The Westin Indianapolis 241 W Washington St Indianapolis IN - Mar 20 - 22, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise