PolyWorks? V8 to Offer Breakthrough Rapid-Surfacing Capabilities for Reverse-Engineering Applications

Quebec City, Qc, Canada – April 30 2003 - InnovMetric Software is proud to announce that Version 8 of its market-leading point cloud processing software PolyWorks will feature a new rapid surfacing option for PolyWorks/Modeler®. The new option will allow users to quickly build curve networks over accurate polygonal meshes, and automatically fit a network of G1-continuous NURBS surfaces over curve networks.

“We have studied the NURBS surface creation software market for quite a while, in response to many users unsatisfied with the products available on the market” said Marc Soucy, President of InnovMetric Software. “The experience and creativity of our development team has resulted in a new approach to rapid-surfacing generation, based on the unrivaled quality of our polygonal mesh creation technology. This addition to the PolyWorks/Modeler suite will allow users to benefit from the most complete reverse-engineering software solution on the market for their stringent manufacturing applications”, he continued.

PolyWorks’ rapid-surfacing methodology overcomes major limitations found in existing products by offering:

An A-to-Z Systematic Approach to Surfacing

A majority of rapid-surfacing users spend a fair amount of time editing poor results produced by automatic fitting algorithms. The PolyWorks approach is more straightforward and systematic. Users can now:
1- Automatically extract curves describing edges, fillets, corners, and boundaries.
2- Interactively lay down additional tolerance-based curves on the mesh. When a new curve is created, it is automatically snapped to existing curves. The curve network is thus built automatically.
3- Automatically fit NURBS surfaces directly over a curve network. If the quality of fitting needs to be improved locally, users can easily subdivide selected patches to get more accuracy in a given area.

Users can perform the first, second, and third phases without having to go back to modify the results of an earlier phase.

T-Junctions in Curve Networks

T-junctions occur when two or more 4-boundary patches are connected to one boundary of a 4-boundary patch. PolyWorks fully supports T-junctions and fits G1-continuous NURBS surfaces through these junctions. With T-junction capabilities in their hands, users are able to create the same curve network topology that they would create in their CAD system, preventing the creation of unnecessary curve segments that are produced by systems that only support networks of 4-boundary patches. With full T-junction support, users benefit from creating curve networks that are much closer to their "final stage"; requirements, with drastic savings in curve network editing time.

The Fastest Reverse-Engineering Process on the Market

The time needed to reverse engineer a digitized part includes the time spent in rapid- surfacing software as well as the time spent finalizing the model in CAD software. PolyWorks’ new surfacing module leads to a much faster reverse-engineering process. Users directly create their CAD-ready curve networks in PolyWorks, using quick and efficient tools specifically designed for accurate curve creation over polygonal meshes built from digitized point clouds. CAD software is then used to perform complementary work on the reverse-engineered model, such as ensuring higher-order continuity between adjacent surfaces, trimming, or adding CAD features. The combined time spent in PolyWorks and CAD software is reduced to a minimum by avoiding a major reworking of the curve network in the CAD system.

PolyWorks V8 will be released in June 2003.

About PolyWorks

PolyWorks is a complete software suite composed of two distinct packages:
PolyWorks/Modeler

Providing superior meshing capabilities to the manufacturing community since its first release, PolyWorks/Modeler expands the use of polygons for manufacturing applications by delivering unique polygon editing tools dedicated to machining, rapid prototyping, aerodynamic simulation, and finite-element analysis. PolyWorks/Modeler also offers powerful NURBS surface generation tools to convert a polygonal surface into an accurate NURBS model that can be directly imported into any CAD environment.

PolyWorks/Inspector

PolyWorks/Inspector is a powerful software solution that uses high-density point clouds to control the quality of castings/dies/molds, and to approve manufacturing processes through first-article/prototype parts inspection, dimensional measurement on point clouds, and more. PolyWorks offers a complete toolset for comparing forms and profiles (part-to-part and part-to-CAD), and includes the most complete GD&T analysis capabilities on the market, as well as the widest array of soft gauging tools (linear, radius, flush & gap, thickness, etc.). All tasks can be completely automated and performed by one click of a mouse using PolyWorks’ powerful scripting language.

About InnovMetric Software

Founded in 1994, InnovMetric pioneered the market for point cloud inspection and polygonal manufacturing software solutions. InnovMetric is a privately-owned company which has sustained an 86% average yearly growth. Today, PolyWorks licenses are at work daily in more than 30 countries, benefiting users such as BMW, Boeing, Daimler-Chrysler, Ford, GM, Honda, Hyundai, Lockheed-Martin, Peugeot, Porsche, Rolls Royce, Toyota, and Volkswagen with the most complete, accurate, and robust 3D point cloud processing software solution on the market.

For more information please visit our website at www.innovmetric.com or contact us at: svilleneuve@innovmetric.com

2003 InnovMetric Software Inc. All rights reserved. PolyWorks is a registered trademark of InnovMetric Inc. InnovMetric, PolyWorks/Modeler, PolyWorks/Inspector, IMAlign, IMMerge, IMEdit, IMCompress, IMInspect, IMTexture and IMView are trademarks of InnovMetric Software Inc. All other trademarks are the property of their respective owners.



Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise