Honda of Canada Selects Dassault Systèmes DELMIA and 3DVIA Solutions for Alliston Plants

Simulation of Processes and Human Tasks will Identify Most Efficient Assembly Processes for 2011 Civic

Auburn Hills, Mich., December 3, 2008 – Dassault Systèmes (DS) (Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced that Honda of Canada Manufacturing, a division of Honda Canada, Inc., has selected DELMIA 3D digital manufacturing solutions to optimize layout and throughput of the Alliston, Ontario plants in preparation for production of the 2011 Honda Civic. Honda will be implementing the DELMIA Process Engineer, DPM Assembly, DELMIA Human, 3DVIA Composer and the add-on Kineo Path Planner solution from Kineo CAM.

To gain process efficiencies, Honda’s overall production targets, including cost and scheduling data, as well as physical production system constraints, are defined and then stored within DELMIA’s single data repository. All product, process and resource data is in one location for easy accessibility and sharing by any party involved in the process. In digital manufacturing studies, it has been shown that this single repository can reduce data search time by as much as 80 percent.

Once the information is stored, planning analyses and 3D simulations can be run in the virtual world to ensure optimal production load and line balancing prior to plant floor build. Assembly sequences and paths can be verified in conjunction with human studies to ensure that all tasks are within ergonomic feasibility. Additionally, cost and efficiency analysis can be conducted by leveraging the solution software for cohesive management of cost throughout the product, process, and resource dataset. Lessons learned from the various simulations can then be incorporated into a set of best practice processes for reuse in similar situations, helping to further reduce time on future projects.

Additionally, with 3DVIA Composer, the entire digital product definition is fully reused so that assembly process documentation can be easily generated and provided to anyone that needs it, from management to workers on the plant floor. Using 3DVIA Composer to finalize the assembly documentation and offer a 3D interactive environment for the review and presentation of assembly instructions offers greatly improved communication that will shorten approval cycles, help verify the processes more efficiently, improve training of the actual assembly procedures, and reduce assembly errors on the shop floor.        

“DELMIA is not new to Honda,” said Mark Vargo, director of automotive sales, DELMIA, Dassault Systèmes. “Every plant in North America has been benefiting from our robotics solution for years, and Dassault Systèmes’ CATIA is Honda’s global design standard. Implementation of this comprehensive set of DELMIA solutions in conjunction 3DVIA Composer will take the Alliston facilities to a whole new level of collaboration and efficiency. We are honored to be their partner on this venture.”

As the digital manufacturing brand of Dassault Systèmes' PLM portfolio, DELMIA delivers a digital manufacturing process environment to optimize production systems prior to physical implementation, at the convenience of a desktop.


About Honda Canada
Honda Canada Inc. began operations in 1969, establishing its first manufacturing facility in 1986, which was followed by a second plant in 1998. Honda Canada, Inc. employs approximately 5,100 associates at its two facilities in Alliston, Ontario. Honda of Canada Manufacturing annually manufactures 390,000 vehicles and purchases two billion dollars of goods from Canadian-based suppliers.

About Dassault Systèmes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 100,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing - ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systèmes’ shares are listed on Euronext Paris (#13065, DSY.PA) and Dassault Systèmes’ ADRs may be traded on the US Over-The-Counter (OTC) market (DASTY). For more information, visit

CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.

Dassault Systèmes Press Contacts:
Therese Snow (DELMIA) Email Contact                         +1 (248) 205-5143
Derek Lane (DS Americas)          Email Contact                         +1 (818) 673-2243

Read the complete story ...

Review Article Be the first to review this article
Featured Video
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
System Designer/Engineer for Bluewater at Southfield, Michigan
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
Montréal Manufacturing Technology Show (MMTS) 2018 at Place Bonaventure Montréal Canada - May 14 - 16, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise