Early Customers Very Pleased by New 3D High Speed Machining for SolidSurfacer
“This is one of our most significant releases, with new features and many enhancements for the entire GibbsCAM product line,” explains Bill Gibbs, founder and president of Gibbs and Associates. “We continually recognize that ease-of-use is of paramount importance to programmers and machinists,” he adds. “This release further decreases programming effort for all machine-tool configurations, and provides additional tools for our customers to easily achieve incremental gains in productivity.”
Features most applauded by early users of GibbsCAM 2009 generally fall into the categories of Milling, Turning, User Interface and Productivity, and Interoperability:
Milling Additions and Enhancements
Advanced 3D HSM (High Speed Machining) - These machining methods, specifically developed for multi-surface hard milling and high speed machining in SolidSurfacer®, provide high quality surface finishes to reduce or eliminate polishing. Included are several new routines useful for multiple applications. The various machining styles offer smooth entries, exits and cutting motions, with steep or shallow angle limits, rest passes, tool-holder collision checking, and options to change cutting style.
- Contour - Developed for finishing and semi-finishing passes, this routine computes equal increments in Z, and generates toolpaths at the various levels, automatically providing clean transitions from one level to the next with smooth entries and exits.
- Constant Step Over Cut - Through user-specified step distance, this routine generates 3D passes with constant separation along a part's surface, working from the outside in. At user discretion, this machining style permits extremely smooth finishes through user-controlled steps.
- Flats Cut - This routine recognizes and machines flat areas automatically. Like the other 3D HSM routines, it uses minimal distance retraction in moving from one section of a work piece to another, avoiding work piece features while minimizing non-cutting motion.
- Lace Cut - Like parallel machining, but cutting in a single direction, this style provides consistently smoother cuts, especially noticeable in corners. By using the toolpath filleting option, also available within other HSM routines, users optimize smoothness in cutting motion.
- Intersections - This routine automatically identifies the seams of a part surface and generates toolpath along those seams, following and conforming to the 3D shape of the part. A superior surface finish is attained through additional offset passes generated from the original seam pass.
- Automatic Core Detection - Designed for machining cores, this automated routine machines parts from the outside in, always climb cutting to reduce or eliminate damage to inserted cutters. Toolpath direction changes automatically from inside to outside when internal pockets are detected, minimizing the need for full-width cuts or helical ramping into the work.
- Improved Pocketing - Like Automatic Core Detection, but working from the center outward, this routine was specially developed for cavities. It computes equal Z increments on the model and generates toolpaths for each level, to clear large areas of material rapidly.
Turning Additions and Enhancements
Extensive New Lathe Features - Developed to take advantage of the newer high-tech cutting tools, to turn harder materials and to machine smoother surfaces, these provide greater efficiency through increased tool control. Included are advanced entries and exits, entry feed rates, enhanced no-drag, clean-up pass, multi-pass plunge roughing, notch ramp roughing, offset contour and tool edge path contour, threading entry and tapping tools, and groove-tool deflection compensation.
MTM Enhancements to Sync Manager - Flexibility from new additions to Sync Mgr and Op List and new Op Mgr associativity make multi-task machining easier and more efficient.
User Interface and Productivity Enhancements
Multi-CPU Support and Batch Processing - This allows users to continue working while they generate high-speed, or multi-surface machining and other large toolpaths in the background, without tying up the workstation.
Faster Simulation - Performance enhancements make toolpath simulation much faster.
Multiple View Ports, Panes and Pop-up Windows - These enable viewing tool and cutter motion from various perspectives, extremely useful for gouge detection and collision avoidance in multi-task machining and multi-axis verification.
Multiple (unlimited) Undo/Redo - Applicable to all user created geometry, solids, surfaces and operations, this added capability increases user productivity by eliminating iteration when returning to a previous condition is necessary.
Graphics Pre-Selection - Simple mouse roll-overs now select faces and edges, eliminating the need to click on items to select them.
Enhancements for Cut Part Rendering - Visualization and verification are made faster and easier with new hot key for single step, Tool/Op color mode, geometry display, point-of-view lock, Show Rapid tool color, and FastCut display.
Hidden-Line Toolpath Display - This new feature eases visualization in toolpath verification.
Additions for Interoperability
Updated Certification - For flexibility and peace of mind, the software is now certified for Windows Vista and Solid Edge v20.
Multiple CAD System Support - Continuing the ease of using models and geometry from multiple systems, GibbsCAM support extends to Parasolid v19.1, SolidWorks 2008, ACIS v18.0, Autodesk Inventor 2009, CATIA v5 r18, Granite 5.0, Pro/ENGINEER Wildfire v4.01 and UGS/NX5.
Initial shipments of GibbsCAM 2009 will go to customers in the United States and Canada, followed by shipments to international customers who use English documentation. International shipments of GibbsCAM 2009, with localized documentation, are scheduled for later in the year. For more information about GibbsCAM and the GibbsCAM 2009 release, or to locate your local GibbsCAM reseller, go to www.GibbsCAM.com
About Gibbs and Associates and GibbsCAM
For over twenty years, Gibbs and Associates has been a leader in providing cutting edge CAD/CAM technology, while maintaining its signature ease-of-use and productivity. Powerfully Simple, Simply Powerful is the guiding philosophy at Gibbs. Gibbs believes in empowering the NC programmer, machinist, and manufacturing engineer, not eliminating them. Gibbs' goal is to introduce manufacturers to new technologies and new ways of working that makes their machining easier and their businesses more profitable. To achieve this goal, Gibbs creates tools that are naturally intuitive, graphically interactive, extremely visual, associative, and just plain enjoyable to use. Gibbs provides a total quality solution with the service and support successful customers require.
The current GibbsCAM product line supports 2- through 5-axis milling, turning, mill/turning, multi-task simultaneous machining and wire-EDM. GibbsCAM also provides fully integrated manufacturing modeling capabilities that include 2D, 2.5D, 3D wireframe, surface, and solid modeling. GibbsCAM has received Microsoft's “Designed for Windows XP/2000” and “Works with Windows Vista” certifications. GibbsCAM's data exchange capabilities are able to access the broadest range of native and industry standard CAD data formats. GibbsCAM is certified under the Autodesk Inventor Certified Application Program, is a Solid Edge Certified Select Product, and is a SolidWorks Certified CAM Product. GibbsCAM is either offered or endorsed by a number of leading worldwide control and machine tool manufacturers, including GE Fanuc, Infimatic, Siemens, Doosan Infracore, Haas, Index, MAG Fadal, Mazak, Mitsubishi, Mori Seiki, and Tornos. Gibbs and Associates distributes its products worldwide through a network of international Resellers.
In January 2008, Gibbs and Associates merged with Cimatron Ltd, and is now operating as a wholly owned subsidiary. For more information about Gibbs and Associates and its CAM software packages, call 1-800-654-9399, or visit the company on-line at www.GibbsCAM.com.
With over 25 years of experience and more than 40,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions for mold design, die design, electrodes design, 2.5 to 5 axes milling, wire EDM, turn, Mill-turn, rotary milling, multi-task machining, and tombstone machining. Cimatron's subsidiaries and extensive distribution network serve and support customers in the automotive, aerospace, medical, consumer plastics, electronics, and other industries in over 40 countries worldwide.
Cimatron is publicly traded on the NASDAQ exchange under the symbol CIMT. For more information, please visit the company web site at www.cimatron.com.
Gibbs and Associates
(805) 523-0006 (Fax)
The Gibbs logo, GibbsCAM, GibbsCAM logo, Virtual Gibbs, Gibbs SFP, SolidSurfacer, MTM and “Powerfully Simple. Simply Powerful.” are either trademark(s) or registered trademark(s) of Gibbs and Associates in the United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners.
Safe Harbor Statement
This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act Of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to the company's plans, objectives and expected financial and operating results. The words "may," "could," "would," “will,” "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of the future performance and involve risks and uncertainties, many of which are beyond the company's ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Gibbs and Associates or Cimatron products and services, long sales cycle, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties of the business, refer to the Cimatron's filings with the Securities and Exchanges Commission. The company cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Gibbs and Associates and Cimatron undertake no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.
# # #