Moldflow Announces the Release of Moldflow Design Link 6.0

FRAMINGHAM, Mass.—(BUSINESS WIRE)—June 23, 2008— Moldflow Corporation (NASDAQ:MFLO), the leading provider of plastics simulation software that empowers more users to optimize more designs across their enterprise, today announced the release of Moldflow Design Link (MDL) 6.0, a software product that allows the direct import of solid geometry data from some of the worlds leading CAD systems into Moldflows analysis solutions. Using MDL, native CAD data from CATIA V5®, Pro/ENGINEER®, SolidWorks® and Parasolid-based CAD systems can be seamlessly imported into Moldflow Plastics Advisers® (MPA®), and Moldflow Plastics Insight® (MPI®) software.

MDL 6.0 introduces a next generation mesh generator which was developed from toolkits licensed from Simmetrix Inc., a leading provider of component software for simulation-based design and CAD/CAE integration. Key features of this mesh generator are:

  • CAD-kernel Driven Surface Meshing Directly generate Dual Domain or 3D meshes from the CAD geometry. Resultant meshes are analysis-ready, conform better to the part geometry and have fewer quality errors.
  • Multi-component (Assembly) Meshing Simultaneous mesh creation for all components of an assembly while ensuring that contact surfaces of mating components are perfectly matched. This feature brings about significant time savings and simplifies the workflow for users working with multi-component models.
  • Direct 3D Meshing Previously, an intermediate Dual Domain mesh was created and then remeshed to 3D. By eliminating this intermediate step and creating 3D meshes directly from the CAD geometry, MDL 6.0 improves user productivity.

Additionally, MDL 6.0 supports the latest versions of CAD systems including CATIA V5 R18, Pro/ENGINEER Wildfire® 4.0, and SolidWorks 2008.

Ken Welch, Chief Operating Officer at Moldflow Corporation, states: Ever increasing model size and complexity, a growing trend in the design and manufacture of multi-component plastic parts, and shrinking project lead times were the drivers behind the development of this next generation mesh generator. MDL 6.0 addresses these needs by delivering faster, scalable, and robust meshing capabilities.

Availability

Moldflow Design Link 6.0 is available now. For more information, please call Moldflow in the USA at +508-358-5848 or visit www.moldflow.com.

About Moldflow Corporation

Moldflow (NASDAQ: MFLO) is the leading provider of plastics simulation software that empowers more users to optimize more designs across their enterprise from the earliest stages of new product development. Moldflow products benefit anyone involved in the design or manufacture of plastics injection molded parts including industrial designers, mechanical design engineers, CAE analysts, mold designers, mold makers, process engineers and manufacturing engineers. For more information, visit www.moldflow.com.

Note: Moldflow, Moldflow Plastics Insight, Moldflow Plastics Advisers, Moldflow Design Link, MPI, MPA, MDL and Dual Domain are trademarks or registered trademarks of Moldflow Corporation or its subsidiaries worldwide. All other trademarks are properties of their respective holders.



Contact:

Moldflow Corporate Contact:
Melissa Aytek, 508-358-5848 x 258
Email Contact
or
Investor Relations Contact:
Dawn Soucier, 508-358-5848 x 234
Email Contact


Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise