3D Systems Announces Investor Day

ROCK HILL, S.C.—(BUSINESS WIRE)—April 17, 2007— 3D Systems Corporation (NASDAQ: TDSC), a leading provider of 3-D Modeling, Rapid Prototyping and Manufacturing solutions, announced today that it will hold an Investor Day on May 1, 2007 in conjunction with the Rapid Prototyping and Manufacturing Show (RP&M). 3D Systems' Abe Reichental, president and chief executive officer, will present an overview of the Company as well as its business strategies. Kevin McAlea, 3D Systems' vice president, general manager Sintering Products business unit, will provide an update on the Company's Rapid Prototyping Systems, and Rob Connelly of Fineline Prototyping will give a customer review. A Questions & Answers session and tour of 3D Systems' Rapid 2007 Trade Show Display will follow the presentation.

3D Systems plans to display its new, revolutionary V-Flash(TM) Desktop Modeler, the Viper(TM) Pro SLA(R) Systems and its suite of Rapid Prototyping and Manufacturing materials at the RP&M (Rapid) Show on May 1-3, 2007 at the Marriott Renaissance Hotel in Detroit, Michigan. Show attendees can visit the 3D Systems' booth at #411.

To register and obtain a pass to the 3D Systems Investor Day presentation and for more information regarding the event, please contact Chanda Hughes, 3D Systems' Investor Relations at (803) 326-4010, or via email at hughesc@3dsystems.com.

3D Systems will broadcast the presentation live over the internet on May 1 at 10:00 a.m., Eastern Time.

To listen to the presentation via phone, dial 1-888-336-3485. A recording will be available two hours after completion of the presentation for two days. To access the recording, dial 1-800-642-1687 and enter 6245954, the conference call ID number.

To listen to the audio Webcast, log onto 3D Systems' website at www.3dsystems.com. The link to the Webcast is provided on the homepage of the website. The Webcast will be available for replay beginning approximately 48 hours after completion of the call at: www.3dsystems.com under the Investor Relations' section.

Webcast and Conference Call participants will not be able to pose questions during the Q&A session.

About 3D Systems Corporation

3D Systems is a leading provider of 3-D Modeling, Rapid Prototyping and Manufacturing solutions. Its systems and materials reduce the time and cost of designing products and facilitate direct and indirect manufacturing by creating actual parts directly from digital input. These solutions are used for design communication and prototyping as well as for production of functional end-use parts: Transform your products.

More information on the company is available at www.3dsystems.com, or via e-mail at moreinfo@3dsystems.com.

Contact:

3D Systems Corporation
Investor Contact: Chanda Hughes, 803-326-4010
Email Contact
or
Media Contact: Katharina Hayes, 803-326-3941
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise