ANSYS and PCA Engineers Announce Software Integration

New Collaboration Geared to Help Companies Create and Optimize Turbomachinery Designs in Early Stages of Product Development

SOUTHPOINTE, Pa., March 22 /PRNewswire-FirstCall/ -- ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced that it has partnered with PCA Engineers Limited to allow engineers to develop better turbomachines in shorter time. Working together, the companies have integrated PCA's Vista(TM) (VISual Turbomachinery Analysis) software within ANSYS(R) solutions to improve turbomachinery design and simulation. The integration -- now available in ANSYS 11.0 -- makes it possible for turbomachinery designers to use PCA's proven engineering codes to develop preliminary blade designs, which then can be modified using ANSYS(R) BladeModeler(TM) and analyzed for fluid dynamic, thermal and/or structural performance within ANSYS software.

PCA is an international engineering consultancy specializing in turbomachinery design. Its meanline design codes, Vista CCD for centrifugal compressor design and Vista CPD for centrifugal pump design, have been integrated within ANSYS BladeModeler. Given the machine duty -- such as speed, mass flow and pressure ratio -- and geometric constraints, these codes will configure the impeller blade shape and provide essential non-dimensional performance parameters on which to base design decisions.

"The recent addition of PCA's Vista CCD and Vista CPD compressor and pump design software into the ANSYS product line has considerably streamlined our turbomachinery design process," said ANSYS user Nicholas D'Orsi, partner and chief engineer of Turbo Solutions Engineering LLC. With a broad range of experience with computer-aided engineering (CAE) software, the company utilizes ANSYS solutions to help customers in industries as diverse as aerospace and HVAC to develop new machines. "By using Vista and ANSYS software, we can rapidly complete iterative sizing and performance estimation for centrifugal turbomachinery. A key feature of this new interface is the transfer of an initial impeller three-dimensional design into ANSYS BladeModeler. Once inside this software, the analysis features of ANSYS(R) CFX(R) allow for quick optimization of the design."

The Vista CCD and CPD design codes are fully integrated within ANSYS BladeModeler and are included when customers purchase or license ANSYS BladeModeler. ANSYS BladeModeler saves the Vista input parameters as part of the blade design so that new design iterations can be started from a previous design.

"The integration of PCA's software into ANSYS BladeModeler gives customers what they have asked for: built-in meanline design tools to help them rapidly develop new blade designs in the early stages of design," says Brad Hutchinson, vice president, global marketing, aerospace and turbomachinery at ANSYS, Inc. "This component of the blade development process was not previously available in the ANSYS turbomachinery solution. This new integration addresses compressor and pump designs, and we believe the partnership between ANSYS and PCA will benefit customers in the future as we apply such expertise to the full range of turbomachinery equipment."

As a consultancy, PCA Engineers serves many of the world's leading manufacturers of axial and radial turbomachinery. "PCA has enjoyed the extensive experience of ANSYS design and CFD tools over 10 years' use in the optimization of turbomachinery components in support of our consultancy business," said Chris Robinson, managing director of PCA Engineers. "We respect ANSYS enormously for their technical capability and attitude toward ongoing improvement in enhanced user interfaces -- which all continue to improve productivity. We are delighted to be able to contribute toward this success."

About PCA Engineers Limited

PCA Engineers Limited is an international engineering consultancy specializing in turbomachinery design, the development of turbomachinery design software and gas turbine cycle analysis software. Established in 1989 and headquartered in Lincoln, U.K., PCA serves many of the world's leading manufacturers of axial and radial turbo machinery -- encompassing aero-gas turbines, industrial gas turbines, steam turbines, air compressors, turbochargers, gas compressors and expanders, and pumps. Visit for more information.

Vista is a trademark of PCA Engineers Limited.

About ANSYS, Inc.

ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost- conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 40 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ approximately 1,400 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit for more information.

ANSYS, ANSYS Workbench, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners.

Web site:

Review Article Be the first to review this article

Featured Video
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
System Designer/Engineer for Bluewater at Southfield, Michigan
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Upcoming Events
Live SOLIDWORKS Event Hosted by Converge at 2482 Patterson Rd Unit 2 Grand Junction CO - May 22, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
SolidCAM: Break the Chains

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise