TOKYO -- (MARKET WIRE) -- Nov 02, 2006 -- IBM (NYSE: IBM) and Dassault Systèmes (DS) (NASDAQ: DASTY) (Euronext Paris: #13065) (PARIS: DSY), a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced that Dome Co., Ltd., a developer and manufacturer of racing cars, has been using PLM solutions to streamline the design of racing cars and other low-volume vehicles since April 2001. Dome leverages CATIA V5 Composites Design for composite part design and manufacturing, to improve product quality and reduce time to market.

"With a low-volume production rate, our challenge is to create high-performance cars within ever shorter deadlines. CATIA V5 Composites Design and IBM Intellistation have allowed us to shorten lead time," says Akihiro Oku, Technical Director at Dome. "Composite materials make up around 80% of our racing car parts. Lightweight, stress and erosion resistant, composites can be molded into innovative shapes, but are expensive. PLM has enabled Dome to streamline composite part design and manufacturing, freeing resources for innovation and developing creative solutions in response to customer demand. This is critical for continued success in our market."

"Dome is a classic example of a company differentiating itself through innovation. In the process, they are delighting customers and increasing their own profitability while accelerating time to market," said Chris Bahr, Director of PLM Solutions, IBM Software Group, Asia Pacific. Nikos Calcafacos, Dassault Systèmes' PLM General Manager, Japan, comments, "CATIA V5 Composites Design gives Dome a competitive advantage, by easily incorporating composite elements into their cars, making them lighter and faster."

CATIA V5 Composites Design provides a collaborative environment that covers the entire composites process, from preliminary and detailed design to manufacturing requirements. Engineers can focus on creating optimal designs to fully exploit composite advantages. An important advantage of CATIA V5 Composites Design stems from its synchronization mechanisms, which allow engineers -- no matter their location -- to work simultaneously on the same design. CATIA V5 Composites Design connects seamlessly to production equipment.

About IBM

To know more about IBM, visit www.ibm.com. To know more about IBM and PLM, visit www.ibm.com/solutions/plm

About Dassault Systèmes

As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 90,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product -- SolidWorks for 3D mechanical design -- DELMIA for virtual production -- SIMULIA for virtual testing and ENOVIA for global collaborative lifecycle management, including ENOVIA VPLM, ENOVIA MatrixOne and ENOVIA SmarTeam. Dassault Systèmes is listed on the Nasdaq (DASTY) and Euronext Paris (#13065, DSY.PA) stock exchanges. For more information, visit http://www.3ds.com

CATIA, DELMIA, ENOVIA, SIMULIA and SolidWorks are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.

IBM Press Contact:
Zohra Dali
+33 6 71 92 71 87

Email Contact

Dassault Systèmes Press Contacts:
Derek Lane (Americas)
+1(818) 673-2243

Email Contact

Mikiko Igarashi (AP)
+81-3-5442-4138

Email Contact

Arnaud Malherbe (EMEA)
+33 (0)1 55 49 87 73

Email Contact

---

---

Rating:

 Be the first to review this article