SolidWorks And COSMOS Assist Student Engineers In International "Formula" Auto Racing Competitions

CONCORD, Mass.—(BUSINESS WIRE)—Sept. 18, 2006— SolidWorks(R) and COSMOS(R) software are key factors in continuously improving the designs of Formula-style race cars that are achieving big results in high-profile student competitions around the world.

In the past year alone, Texas A&M University, The University of Applied Sciences Stralsund (Germany), National University of Singapore, and RV College of Engineering in Bangalore (India) - all using SolidWorks and COSMOS software - have logged noteworthy results in Formula SAE and Formula Student competitions worldwide.

Organized by the Society for Automotive Engineers, Formula SAE competitions give students a rare opportunity to conceive, design, fabricate, and race small cars styled after Formula One vehicles. Frame and engine restrictions challenge students' creativity while lowering risks. Formula Student is the program's European counterpart, run by the Institution of Mechanical Engineers (IMechE) in the UK, Verein Deutscher Ingenieure (VDI) in Germany, and Associazione Tecnica dell'Automobile (ATA) in Italy.

A Texas A&M University team of student engineers won the 2006 Formula SAE West competition in June at the California Speedway in Fontana, CA. The four-day event drew teams from 71 universities in the United States and eight other countries, including Australia, Brazil, Canada, Japan, Mexico, Sweden, and Venezuela. In addition to its overall win, the Texas A&M team finished first in the competition's endurance/economy and skid pad events, and won the Honda Dynamic Events Award and the Road & Track magazine award for acceleration and agility.

"Our entry this year featured a new supercharged Yamaha engine that enabled a 60-pound weight reduction in the car with the same power-to-weight ratio," said Make McDermott, Texas A&M faculty advisor. "SolidWorks software helped us integrate these and other changes to design a better car well within our deadline. COSMOS helped us confirm our designs were on target and optimize stiffness vs. weight for maximum performance. The dramatic productivity gains enabled by SolidWorks and COSMOS have allowed us to remain competitive as the performance required to win has escalated each year. The integration of the tools made design and analysis two elements of a single process." Team sponsors include authorized SolidWorks reseller Texas Engineering Systems.

The University of Applied Sciences Stralsund defended its title as best German team in July at Formula Student 2006 in Bruntingthorpe, U.K. The team placed sixth overall among 63 teams that started, earning additional top 10 placements in sprint and endurance/fuel economy. In early August, during the inaugural, SolidWorks-sponsored Formula Student Germany event in Hockenheim, the team placed seventh overall and third place in the cost competition.

"SolidWorks software helped us continuously refine our design for the competition, and COSMOS software helped us make our design ultra-efficient, a key factor in making the car economical and for our third-place finish in the cost competition," said team leader Jens Hartmann.

SolidWorks Corporation is sponsor of the team and of Formula Student Germany, which attracted entries from 41 teams representing universities and technical colleges from 11 countries. "So many German institutions and students are passionate about automotive engineering, racing, and Formula competition that there was little choice but to create Formula Student Germany," said Lutz Bettels, SolidWorks Corporation's business manager for Europe education. "Formula Student is an excellent opportunity for ambitious students to prove their engineering skills in a genuine engineering project and transfer their knowledge about SolidWorks' 3D CAD products into a project that prepares them for their professional life."

The National University of Singapore (NUS) team finished first among Asian teams at the International Formula Society of Automotive Engineers (FSAE) race held May 17-20 in Michigan. Its car, Centennial II, was ranked ninth in the world for overall design and finished in 27th place overall out of 140 teams. The team was the only competitor from a country that does not manufacture cars nor host auto racing events. SeaCAD Technologies, an authorized SolidWorks reseller in Singapore, was included among the sponsors.

"SolidWorks and COSMOS software made it easy for our team to translate good ideas into a higher-performing vehicle and then dial it in for competition," said NUS FSAE faculty advisor and Associate Professor Seah Kar Heng. "This project has been an enriching experience in itself and invaluable preparation for students' careers after college."

The RV College of Engineering in Bangalore, India, won the Best Endeavour Award and Best Cost event at the recent FSAE-Australasia. The team will field an improved design, the Ashwa RZ 06, at the FSAE-Australasia competition this December. The new vehicle, built on a 600 cc Honda engine, weighs only 240 kilograms (530 pounds) but will be turbocharged to turn out more than 90 brake horsepower. "SolidWorks software helped us quickly make design improvements, and COSMOS helped us ensure that our designs would perform safely and efficiently on the track," said student Arun Raj. "We're looking forward to even better results in December 2006."

"These Formula SAE and Formula Student competitions are once-in-a-lifetime learning opportunities that provide substantial engineering experiences that prepare students for careers on high-performing design teams," said Marie Planchard, SolidWorks Corporation's director of education. "SolidWorks and COSMOS are important elements of that experience given their pervasiveness in the engineering world and their focus on ease of use, which frees students to focus on designing faster, safer, more economical vehicles."

About SolidWorks Corporation

SolidWorks Corporation, a Dassault Systemes S.A. (Nasdaq: DASTY, Euronext Paris: #13065, DSY.PA) company, develops and markets software for design, analysis, and product data management. It is the leading supplier of 3D CAD technology, providing intuitive, high-performing software that helps product design teams develop great products. For the latest news, information, or an online demonstration, visit the company's Web site ( or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

SolidWorks is a registered trademark of SolidWorks Corporation. COSMOS is a registered trademark of Structural Research & Analysis Corporation. Other brand and product names are trademarks of their respective owners. Copyright (c) 2006 SolidWorks Corporation.

Bookmark with ws/viewrelease.html?prid=396

Submit this story to digg:

Submit this story to slashdot: ages/news/viewrelease.html?prid=396

Technorati tags










Note to Editors: Due to the length of some of the URLs in this press release, it may be necessary to copy and paste them into your Internet browser's URL address field.

SolidWorks Corporation
Laura Kozikowski, 978-371-5077

Email Contact
Beaupre & Co. Public Relations, Inc.
Darby Johnson, 603-559-5809

Email Contact


Review Article Be the first to review this article

Featured Video
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
System Designer/Engineer for Bluewater at Southfield, Michigan
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Upcoming Events
Live SOLIDWORKS Event Hosted by Converge at 2482 Patterson Rd Unit 2 Grand Junction CO - May 22, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
SolidCAM: Break the Chains

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise