New MagNet 6.22, ElecNet 6.14, And ThermNet 1.12 Releases

Highlights of these releases include the following:
•        Loss calculation in MagNet's Transient solvers (see below)
•        Added:
o        extrusion as a mesh layer option
o        position-dependent (forward/backward) load parameters
o        parameters that relate to the "Raleigh region" and the number of "curve fit knots" for material curves
•        Enhanced display of curved surfaces
•        Improvements in volume meshing and re-meshing for MagNet's Transient 3D with Motion solver and general solution speedup

Click here ( http://www.infolytica.com/secured/customer/support/files/) to go to our Download page.

Loss calculation in transient solvers available in latest version of MagNet:

There are many different formulations available to account for iron loss in problems where the waveform is non-sinusoidal. Regardless of which method is

used, the calculations are all approximations that try to generalize the data in the standard loss curves. These loss curves are a function of frequency

and peak induction, which assume a sinusoidal excitation. In order to use these curves, the equivalent frequency and equivalent peak induction have to

be determined from the transient waveform. Version 6.22 of MagNet achieves this by allowing the equivalent frequency to be specified as an independent

parameter for each geometric component. The equivalent peak induction is calculated as half the difference between minimum and maximum values in a

specified time interval. The loss curve for a particular component is constructed based on the specified equivalent frequency, and this curve is used to

determine the loss at each point in the component, as a function of the equivalent peak induction.


Technical Notes

A technical note on Thin shell meshing with layers: ( http://www.infolytica.com/en/products/technote/mesh%20layers.pdf) is provided as an overview of how

the use of Infolytica's Mesh Layers feature can help maximize the efficiency of a solution mesh and obtain more accurate results.


Free MagNet Trial Edition now comes with additional documentation that is ideal for undergraduate courses:

If you're one of the thousands that have already downloaded a free copy of MagNet Trial Edition, you're probably aware of the extensive documentation

package that is included with the software. What you may not know is that additional documentation

http://www.infolytica.com/en/products/trial/trialdoc.html) , tailored towards the use of MagNet in a classroom environment, is also available free-of-

charge from our web site. This includes Year 1 & Year 2 course modules (Electromechanics / Electrical Machines and Systems) and a document that compares

several different designs for a moving-coil driver of the kind used in loudspeakers and vibration generators. We wish to thank Professor J D Edwards of

the Department of Engineering and design at the University of Sussex for allowing us to reproduce and distribute these documents.


News & Events

Trade Shows:

APEC 2006
Booth #7
March 19-23, 2006
Dallas, Texas
http://www.apec-conf.org/2006/APEC06_Home_Page.html

SAE World Congress 2006
Booth #870
April 3-6, 2006
Detroit, Michigan
http://www.sae.org/congress/

Training Course:

Electromagnetics with MagNet
May 16-18, 2006
Infolytica Corporation
Montreal, Quebec                                                                 
http://www.infolytica.com/en/news/events/mn-course.html

This three-day course helps participants acquire a sound understanding of 2D/3D electromagnetic modeling, whilst learning how to work more effectively

on their company's designs using MagNet software.


Read the complete story ...


Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise