Dassault Systemes Introduces Off-the-Shelf PLM Components

PARIS—(BUSINESS WIRE)—Jan. 25, 2006— Dassault Systemes (DS) (NASDAQ: DASTY)(BOURSE:DSY.PA) (EURONEXT:13065) today rolled out an exciting new concept in the world of Product Lifecycle Management (PLM), that will make key business processes from DS Industry Solutions available to customers of all sizes. The new products, known as Business Process Content (BPC), are flexible software assets, enabling customers to implement and adapt Industry Solutions to meet their specific needs, without the cost of tailor-made software.

Dassault Systemes state-of-the-art Industry Solutions are based on industry-specific PLM Practices, covering innovative and well-proven industry scenarios in the form of methodology and documentation. BPCs are easily implemented and allow customers to adapt their solution, leading to increased productivity, profitability, and rapid return on investment.

DS develops BPCs by identifying customers' specific needs, and the associated industrial processes. Our engineers then check if a preconfigured solution could be reused by multiple customers from the same industry or sharing the same processes.

"A key challenge in developing Mission and Avionic Systems is to ensure the consistency of the overall system's engineering data model -- comprised of product requirements, component specifications, design, and validation plans -- throughout the entire development," says Jean Sass, chief information officer, Dassault Aviation. "The BPC concept based on CSE Solutions provided us with predefined components and preconfigured processes that allowed us to quickly deploy a collaborative environment for requirement engineering support."

How does it work? Traditional preconfigured solutions are usually the result of a sizeable investment in time and money. Customers can sometimes leverage this investment by reusing a solution, but this is often problematic, because solutions have been customized to specific requirements. It can also be difficult to use only the part of the solution required, because of strong interdependencies between the components or the data models.

DS' BPC products overcome these limitations. Drawing on many years of experience in creating preconfigured industry and cross-industry solutions, DS has identified the parts of solutions which have been tried and tested and shown to have a wider use across varied industries. These flexible solution components have been encapsulated as BPCs, allowing more users to benefit from the proven advantages of a certified component of an Industry Solution, at a fraction of the cost.

The first delivery of BPCs, available on January 31, 2006 includes ten V5R15 certified BPCs built on the industry-leading PLM solutions SMARTEAM and CATIA. Included in this first release are BPCs for the Collaborative Systems Engineering (CSE) solution, a cross-industry solution which optimizes the early definition stages of product development, where companies establish the requirements, functions and systems architecture of a new product. CSE consists of multiple BPCs based on SMARTEAM, such as Requirement Management, Collaborative System Lifecycle Management & Traceability and others. Other BPCs being offered in this first delivery can be deployed within the Electrical & Electronics, Fabrication & Assembly, and Automotive industries. BPCs come in two types: Code Based, delivered as executable code, and Knowledge Template, re-configurable, intelligent design components.

"BPCs will help customers achieve faster ROI and higher success rates, while reducing project risks and increasing business flexibility," noted Bruno Latchague, Executive Vice President PLM R&D Solutions and Support, Dassault Systemes. "BPCs will help customers save time and money, getting their solutions on a fast, proven track to the desired results."

About Dassault Systemes

As world leader in 3D and Product Lifecycle Management solutions (PLM), the Dassault Systemes group brings value to more than 80,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systemes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire life cycle of products from conception to maintenance. Our offering includes integrated PLM solutions for product development (CATIA(R), DELMIA(R), ENOVIA(R), SMARTEAM(R)), mainstream 3D design tools (SolidWorks(R)), and 3D components (Spatial/ACIS(R)). Dassault Systemes is listed on the Nasdaq (DASTY) and Euronext Paris (#13065, DSY.PA) stock exchanges. For more information, visit http://www.3ds.com



Contact:
Dassault Systemes Press
Frederique Moureton (EMEA), +33 1 40 99 68 80

Email Contact
or
Derek Lane (Americas), +1 818-673-2243

Email Contact
or
Financial Dynamics
Nelly Dimey or Pierre Mas, + 33 1 47 03 68 10

Email Contact
pierre.
Email Contact

Rating:


Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise