Stratasys Introduces Large-Format PolyJet Rapid Prototyping System

Larger PolyJet System is Fast with Ultra-High Resolution

MINNEAPOLIS—(BUSINESS WIRE)—Nov. 1, 2005— (Nasdaq: SSYS) Stratasys today introduced a large-format PolyJet(TM) rapid prototyping system -- the Eden500V. It is the newest member of the Eden line of PolyJet systems, manufactured by Objet Geometries and distributed in North America by Stratasys.

Besides the PolyJet hallmarks of high speed, feature detail, and surface smoothness, the Eden500V has a larger build envelope. It measures 19.7 x 15.7 x 7.9 in. (500 x 400 x 200 mm), permitting the construction of bigger models than previous PolyJet systems. The large build envelope also allows multiple models to be produced simultaneously in a single run. The Eden500V uses four jumbo-size material cartridges, which support the larger builds, so the machine can operate longer unattended, improving productivity over existing PolyJet systems.

New speed and resolutions settings allow users to match these properties to specific projects. In high-speed mode, the speed effectively doubles that of previous PolyJet systems, which are already among the fastest in the industry. This is achieved by reducing horizontal resolution to 30-microns (0.0011 in.). The high-resolution setting of 16-micron (0.0006 in.) layers enables detail and surface finish smoothness that rivals any competitive process. Both settings offer excellent quality, with an X and Y resolution of up to 600 dpi.

Like previous PolyJet systems, the Eden500V employs a clean, safe modeling process. Sealed liquid resin cartridges are inserted into the machine, which then jets out only the amount needed to build the model. While each model layer is built, it is simultaneously cured with UV light. When models are removed, they are already fully cured, so no exposure to resin occurs throughout the entire process.

"I believe PolyJet is setting a new standard in rapid prototyping," says product manager Fred Fischer. "The Eden500V offers an unprecedented suite of benefits from high material capacity, to speed, to ultra-fine detail, and it's a safe, clean process. No other prototyping system offers all the benefits of The Eden500V. It's a tough competitor."

The Eden500V uses all available PolyJet materials, including the Translucent, Vero, and Tango material lines. These lines offer features ranging from general purpose, transparent resins to those with high strength and excellent visualization features, and materials with rubber-like flexibility, in addition to other benefits.

Stratasys Inc, Minneapolis, manufactures rapid prototyping systems and 3D printers, and it offers rapid prototyping and rapid manufacturing services. Stratasys equipment is used by OEMs such as aerospace, automotive, defense, medical, and consumer product makers. In 2004, the company installed 36 percent of all systems sold worldwide, making it the unit market leader for the third consecutive year, according to Wohlers Report 2005. Stratasys patented the rapid prototyping process known as fused deposition modeling (FDM(R)). The process creates functional models directly from any 3D CAD program using ABS plastic, polycarbonate, PPSF or other materials. The company holds 175 granted or pending prototyping patents. Stratasys rapid prototyping systems are also used for rapid manufacturing and rapid tooling. In addition to manufacturing products, Stratasys is the exclusive North American distributor of PolyJet rapid prototyping systems, manufactured by Objet Geometries, Rehovot, Israel. On the Web:

All statements herein that are not historical facts or that include such words as "expects", "anticipates", "projects", "estimates" or "believes" or similar words are forward-looking statements that we deem to be covered by and to qualify for the safe harbor protection covered by the Private Securities Litigation Reform Act of 1995. Largest part-building service claim is based on number of dedicated machines. Except for the historical information herein, the matters discussed in this news release are forward-looking statements that involve risks and uncertainties; these include the continued market acceptance and growth of our Dimension BST(TM), Dimension SST(TM), Prodigy Plus, FDM Maxum(TM), FDM Vantage(TM), and Titan(TM) product lines; the size of the 3D printing market; our ability to penetrate the 3D printing market; our ability to maintain the growth rates experienced in this and preceding quarters; our ability to introduce and market new materials such as PC-ABS and the market acceptance of this and other materials; the impact of competitive products and pricing; the timely development and acceptance of new products and materials; our ability to effectively and profitably market and distribute the Eden PolyJet line; the success of our RedEye RPM service; and the other risks detailed from time to time in our SEC Reports, including the annual report on Form 10-K for the year ended December 31, 2004 and the quarterly reports on Form 10-Q filed throughout 2005.

Objet Geometries, Eden500V, FullCure, Eden, TangoBlack, TangoGray and PolyJet are trademarks of Objet Geometries Ltd. and may be registered in certain jurisdictions.

Attention Editors: If you wish to publish reader-contact information, please use:, 952-937-3000, 1-888-480-3548,

Stratasys, Minneapolis
Investor & Editorial Contacts:

Investor Contact:
Shane Glenn, 952-294-3416

Email Contact

Editorial Contact:
Joe Hiemenz, 952-906-2726

Email Contact


Review Article Be the first to review this article

SolidCAM - Break The Chains

Featured Video
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
System Designer/Engineer for Bluewater at Southfield, Michigan
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise