New Optimus release: a full-process PIDO platform that’s faster and smarter than ever

June 08, 2015 -- With the latest 10.16 release, Optimus once more confirms its position as the leading full-process PIDO platform introducing several new capabilities on different levels. New Adaptive DOE methods enable engineers to better focus on interesting design space regions, increasing control over design space discovery strategies, and making better use of existing datasets. By supporting the Functional Mock-up Interface (FMI) standard, Optimus delivers computationally inexpensive yet highly accurate FMUs that facilitate model-based systems engineering. All new Optimus capabilities further increase the flexibility and efficiency of the overall simulation-based engineering process – reducing total cost of ownership (TCO) for our customers.

Active learning through Adaptive DOE

Development teams doing simulation-based engineering can boost their productivity using Optimus’ Design of Experiments (DOE) methods early in the process – planning virtual experiments to deliver a maximum of relevant design insights at minimum simulation cost. With the new Optimus release, engineers can go one step further using Adaptive DOE techniques to actively exploit the design space knowledge being built up as the experiments run. 

The automated active learning process adds extra virtual experiments whenever and wherever needed to better capture the (originally unknown) design space. This eliminates the risk to undersample the most relevant design space regions (overlooking critical information) or oversample less relevant regions (wasting simulation resources). Optimus offers the flexibility to stop this active learning process at any time, for instance when the required sampling accuracy is reached and/or when the allocated simulation budget is spent.

By providing the possibility to start from any user-defined population, Optimus Adaptive DOE allows engineers to expand existing DOE datasets and make better use of the original data. By adding any new DOE samples in batches, the user can also benefit from Optimus’ strong parallelization capabilities to further speed up the process.

FMU/FMI facilitates export and exchange of surrogate models

Optimus adds support of the Functional Mock-up Interface (FMI) standard. Using the open standard, Optimus is now able to export accurate yet simulation-inexpensive surrogate models as Functional Mock-up Units (FMU) – allowing straightforward interconnection with individual subsystem and control system models. As a result, a large number of mechanical, electronic and software components can be elegantly combined into a single design model. This approach is extremely useful for designing functions driven by electronic vehicle devices, such as dynamic stability controllers, emission controllers, etc. especially when different components originate from various suppliers or when the new design needs to be marketed in multiple variants.

In particular when the underlying physics simulations are computationally expensive, the surrogate models packaged as FMUs allow for extremely fast simulations. FMUs can be run as part of any Optimus simulation workflow through an FMI Master tool (e.g. Dymola, JModelica, FMU Checker, LMS Virtual.Lab AMESim, MapleSim, MATLAB/Simulink, AMESim, SimulationX, etc.). Internally Optimus can fully parameterize FMUs just like any ‘regular’ physics simulation model. This means manufacturers can flexibly and efficiently analyze FMU-based simulation models using Optimus’ full design space discovery and multi-objective optimization capabilities.

 

About Noesis Solutions

Noesis Solutions is a simulation innovation partner to manufacturers in automotive, aerospace, and other engineering-intense industries. Specialized in simulation process integration and numerical design optimization, its flagship software Optimus helps customers adopt an ‘Engineer by Objective’ development strategy to resolve their toughest multi-disciplinary engineering challenges. Optimus identifies the best design candidates by managing a parametric simulation campaign that orchestrates customers’ software tools. Customers using this approach report design time savings averaging over 30%, while achieving 10% or more product performance improvements. 

Noesis Solutions operates through a network of subsidiaries and representatives in key locations around the world. For more information, please visit www.noesissolutions.com.



Read the complete story ...


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise