Adams Manufacturing Wins 2015 National Hardware Show American Manufacturing Award for Best New Product

Adams' Big Easy™ Stacking Resin Rocking Chair Recognized for Product Innovation, Design and Quality

PORTERSVILLE, Pa., May 12, 2015 — (PRNewswire) — Adams Manufacturing, a privately-owned western Pennsylvania-based "Made in USA" supplier of exceptional-quality resin furniture and accessories, announced today that its patent-pending Big Easy™ Stacking Resin Rocking Chair has won the prestigious 2015 National Hardware Show American Manufacturing Award for Best New Product. With more than 2,700 exhibitors from around the globe representing over 250,000 products, The National Hardware Show® is one of the largest home improvement exhibitions in the world and was held May 5-7, 2015, at the Las Vegas Convention Center. Selected by a panel of industry judges, Adams' Big Easy™ Stacking Resin Rocking Chair was chosen over hundreds of other manufacturers' new and innovative products—collectively representing millions of dollars in research and development budgets.

ASTM-rated to hold 350lbs., Adams' Big Easy(TM) Stacking Resin Rocking Chair recalls the carefree days of summer, blending the best qualities of resin into an iconic favorite. An industry first due to its innovative stackable resin design, Adams' Big Easy(TM) Stacking Resin Rocking Chair delivers the look, strength and functionality of more expensive traditional wooden and polyethylene rockers, but at a fraction of the cost.

An industry first due to its innovative stackable resin design, Adams' Big Easy ™ Rocking Chair represents a significant design and engineering milestone. Using Finite Element Analysis (FEA), a rigorous computer-based design and data modeling methodology that analyzes the behavior of engineering structures, Adams was able to simulate the various structural strains, stresses and loads that are inherent in any stackable rocking chair design. This resulted in optimal product geometries, proportions and features that were incorporated into the final product.

ASTM-rated to hold 350lbs., Adams' Big Easy™ Rocking Chair recalls the carefree days of summer, blending the best qualities of resin into an iconic favorite. From the porch to the deck, Adams' rocking chair is designed for long-lasting comfort. The curved seat and comforting back support delivers a relaxation that rivals the classic wooden rockers of yesteryear, incorporating a smooth and peaceful rocking action. More affordable and easier to maintain than wood, Adams' Big Easy™ Rocking Chair is built from high-quality resin for all-weather performance. Found on porches throughout North America and deeply engrained in the American psyche, rocking chairs continue to be an extremely popular form of casual seating. Many of today's current rocker designs are either too expensive, too bulky, require assembly, or they can't stack. Technological design advances have allowed Adams to create a stackable resin rocking chair that delivers the look, strength and functionality of more expensive traditional wooden and polyethylene rockers, but at a fraction of the cost.

Proven to be a significant value with retails under $49.99, Adams' Big Easy Stacking Rocking Chair can be found in prominent retailers throughout North America.

About Adams Manufacturing

Adams Manufacturing is the leading "Made in USA" supplier of exceptional-quality residential and commercial outdoor resin furniture and accessories—selling into the world's largest on and offline retail channels. Adams is also the foremost manufacturer of suction cups: www.suctioncups.com. Adams is well known for delivering innovative products with high consumer appeal and value.

Founded in 1976, Adams Manufacturing is headquartered in Portersville, Pennsylvania, with state-of-the-art manufacturing and distribution facilities located throughout the region. For more details about Adams Manufacturing, visit: www.adamsmfg.com, or call 800.237.8287.

Adams Manufacturing, Big Easy Stacking Rocking Chair, Big Easy Adirondack, and Big Easy Stack Chair are registered trademarks of Adams Mfg. Corp. All other company and product names are trademarks, registrations or copyrights of their respective owners.

Press Contact
Dan Stainer
Director of Marketing
Adams Manufacturing
724.368.8837 x127
Email Contact

Adams Manufacturing wins the 2015 National Hardware Show American Manufacturing Award for Best New Product. Adams' Big Easy(TM) Stacking Resin Rocking Chair was recognized for product innovation, design and quality.

Photo -  http://photos.prnewswire.com/prnh/20150511/215172
Photo -  http://photos.prnewswire.com/prnh/20150511/215173

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/adams-manufacturing-wins-2015-national-hardware-show-american-manufacturing-award-for-best-new-product-300081557.html

SOURCE Adams Manufacturing

Contact:
Adams Manufacturing
Web: http://www.adamsmfg.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise