ModuleWorks to show 2013.08 CAD/CAM components at EMO

September 3, 2013 - ModuleWorks, the leading supplier of CAD/CAM components for 5-Axis machining and CNC simulation, will debut the latest release of its CAM components, version 2013.08 at the EMO trade fair for metalworking technology in Hannover (Hall 25, Stand L09) from 16th to 21st September 2013.

ModuleWorks is at the forefront of 5-Axis machining and Simulation technology, providing the machining and CNC simulation technology that powers many of the leading CAM systems available today.

At EMO, they will be showing the latest release of their components; highlights are shown below.

5-Axis Machining

2013.08 introduces a new caching mechanism for 5-Axis toolpath generation, providing much faster regeneration when parameters are changed.  Time consuming intermediate steps of the calculation are cached and those applicable are re-used when re-calculating the toolpath.

Additional toolpath extension options for SWARF Machining have been added to allow the overcutting of tilted edges. Multiblade has additional lead-in/out options to allow arc motion on the approach and retract for each pass.

A new extrude machining toolpath strategy has been added. This features automatic tilting and collision control and is optimized for large stone cutting tools.

 

 

Toolpath extensions for SWARF machining

Simulation

A new proximity alert function has been provided.  Alerts may be triggered at different points as the tool moves closer to the stock. These alerts can be set up individually for the holder, arbor and shaft parts of the tool allowing users and integrators a high degree of control.

The compare functionality which allows gouges and excess material to be shown and measured now has additional control options such as show only gouges, excesses or both using different color selections.

Woodworking applications can now apply different textures for cut and uncut wood. To aid visualization the red coloring of tool and stock collisions can be turned off.

Simulation of turning application now allows a MESH to be used to represent the lathe tool insert, allowing a more accurate representation of the tool.

Simulation has been optimized for the latest generation nVidia GeForce GTX 7000 graphics cards and speed has been dramatically improved by a factor of 3 – 10 times.

 

Texturing for woodworking

The 2013.08 release is now available to all partners by logging into the customer download area at www.ModuleWorks.com

 

About ModuleWorks

ModuleWorks is a software component provider for the CAD/CAM industry. ModuleWorks’ expertise in 5-Axis simultaneous machining and Simulation is recognized throughout the CAM industry and its software components and development services are used by the majority of the leading CAM vendors. ModuleWorks 5-Axis and Simulation software has been used in the manufacture of complex parts for over a decade and they have many users in the global CAD/CAM industry.


marketing@moduleworks.com




Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
Mechanical Engineer I for Air Techniques, Inc at Melville, NY
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
The Rise of Mechatronics at Dassault Systèmes Santa Clara 3979 Freedom Circle, Ste 750 Santa Clara CA - Sep 14, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Kenesto: 30 day trial
SolidCAM: Cutting Webinar



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise