Structural Research and MDI Launch COSMOS/Motion

LOS ANGELES--(BUSINESS WIRE)--Dec. 10, 2001--Structural Research & Analysis Corp. (SRAC), developer of COSMOS/ design analysis products, and Mechanical Dynamics, Inc. (Nasdaq: MDII - news), developer of Dynamic Designer/Motion, today announced the release of COSMOS/Motion, a new mechanical design simulation software based on Dynamic Designer/Motion and powered by ADAMS motion technology.

Fully embedded inside the CAD interface, COSMOS/Motion provides 3D dynamic simulation capabilities, allowing users to see and study the realistic functional behavior of their CAD mechanical assemblies in motion. COSMOS/Motion can be used to detect moving interferences between CAD assembly components, show effects of forces and collisions between parts, and automatically output load data to COSMOS/Works and COSMOS/DesignSTAR.

"We are pleased to expand our long-standing relationship with MDI with the release of the COSMOS/Motion product," said Barbara Guerra, president and CEO of SRAC. "COSMOS/Motion combined with COSMOS/Works and COSMOS/DesignSTAR will help integrate the worlds of mechanical design, motion simulation, and structural analysis even more tightly than before."

"This single-window integration of Motion and Structural analysis with CAD creates a unique synergy between the three products, setting new standards for ease of use," said Alan Wegienka, vice president of Mechanical Dynamics' Design Technology Division. "COSMOS/Motion automatically interfaces with COSMOS/Works and COSMOS/DesignSTAR, allowing CAD users to perform both analysis and motion simulation on their models within the same environment."

COSMOS/Motion is currently available for SolidWorks and can be purchased through one of over 300 COSMOS/Works resellers worldwide.

About Mechanical Dynamics

Mechanical Dynamics' Design Technologies Division provides mechanical design simulation software for use within the leading computer-aided design (CAD) environments. The division's Dynamic Designer products are built upon Mechanical Dynamics' ADAMS® dynamic solution engine, the world's most widely used mechanical system simulation software. Engineering teams from nearly every manufacturing industry today use ADAMS to build and test functional virtual prototypes of their mechanical system designs. Using ADAMS can help minimize the need for physical testing, allowing companies to save time, cut costs, and reduce risk in product development. More information about Dynamic Designer products is available from Mechanical Dynamics, Inc., Design Technologies Division, 2300 Traverwood Drive, Ann Arbor, Mich. 48105 USA; Phone: 734/214-9716; Fax: 734/214-9717; e-mail: Email Contact; Online: http://www.dynamicdesignermotion.com.

About Structural Research & Analysis Corp.

A wholly owned subsidiary of Dassault Systemes S.A. (Euronext Paris No. 13065, DSY.PA) (Nasdaq: DASTY - news), Structural Research & Analysis Corp. develops and markets the COSMOS/ suite of design analysis software products for the mechanical computer-aided engineering market. Since its inception in 1982, SRAC has contributed innovations that have had a significant impact on the evolution of FEA. For more information and a product demonstration, contact your local COSMOS/ distributor or reseller today, or call SRAC directly at 1-800-469-7287 (outside of North America, call 1-310-207-2800). For the latest news and information from SRAC, see the company's Web site www.cosmosm.com.

Editor's Note: COSMOS/Works and COSMOS/Motion are trademarks of Structural Research & Analysis Corp. SolidWorks is a registered trademark of SolidWorks Corporation. ADAMS and the Mechanical Dynamics logo are registered trademarks of Mechanical Dynamics, Inc. All other company, brand, or product names are or may be trademarks of their respective holders.


Contact:
     Structural Research & Analysis Corp.
     Nicole Jones, 310/207-2800, ext. 728
     
Email Contact
     
www.cosmosm.com



Review Article Be the first to review this article
Rand3D

IMTS 2018 Register Now>>

Featured Video
Jobs
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Upcoming Events
29th Design Engineering & Manufacturing Solutions Expo (DMS) at Tokyo Big Sight 3-11-1 Ariake, Koto-ku Tokyo Japan - Jun 20 - 22, 2018
ACMEE 2018 at Chennai Trade Centre Mount Poonamallee Road, Nandambakkam Chennai India - Jun 21 - 25, 2018
Inside 3D Printing Seoul 2018 at Korea International Exhibition Center (KINTEX), Hall 5 408 Hallyuworld-ro, Ilsanseo-gu, Goyang-si, Gyeonggi-do Goyang Korea (South) - Jun 27 - 29, 2018
Kenesto: 30 day trial



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise