PLMIG aims to resolve PLM-ERP

Oxford, England. July 12, 2012

The interface between PLM and ERP is complex, dynamic, and fundamental to the performance of every manufacturing business. Companies worldwide have invested millions of dollars in software to make their interfaces work, but every solution is bespoke. The subject area in general is characterised by misconceptions, half-truths and proprietary solutions.

This is despite the fact that there is a vast amount of experience amongst users, vendors and consultancies about running PLM and ERP successfully.  There are also some fundamental rules and logic which can always be applied, and that should be part of every PLM or ERP manager's toolset.

The PLM Interest Group aims to bring this knowledge and experience together and resolve the whole issue of PLM-ERP.  The platform will be a short series of 3-day workshops that will give PLM and ERP specialists the chance to work together to formalise best practices and to generate a neutral, globally-applicable PLM-ERP Handbook.

The first Workshop is planned for mid-September.  The exact dates and location will be set by those who would like to participate.  More information is available on the PLMIG web site or via .

The PLM Interest Group
The PLM Interest Group is the leading neutral industry group for PLM. It has developed the first ever PLM Governance Standard, together with a new generation of applied PLM material including the PLM Best Practice Library and the Path to PLM; and has previously run workshops that have produced the PLM Benchmarking Handbook; the PLM-SCM Guidebook; and the PLM Maturity Reference Manual.

For more information, please contact:
Roger Tempest
PLMIG



Read the complete story ...


Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise