Dassault Systèmes Reports New Licenses Revenue Growth of 36% in Q2

(2) The non-IFRS percentage increase (decrease) compares non-IFRS measures for the two different periods. In the event there is non-IFRS adjustment to the relevant measure for only one of the periods under comparison, the non-IFRS increase (decrease) compares the non-IFRS measure to the relevant IFRS measure.

(3) Based on a weighted average 124.2 million diluted shares for Q2 2011 and 120.7 million diluted shares for Q2 2010.

DASSAULT SYSTEMES

SUPPLEMENTAL NON-IFRS FINANCIAL INFORMATION

IFRS – NON-IFRS RECONCILIATION

(unaudited; in millions of Euros, except per share data)

Readers are cautioned that the supplemental non-IFRS information presented in this press release is subject to inherent limitations. It is not based on any comprehensive set of accounting rules or principles and should not be considered as a substitute for IFRS measurements. Also, the Company’s supplemental non-IFRS financial information may not be comparable to similarly titled non-IFRS measures used by other companies. Further specific limitations for individual non-IFRS measures, and the reasons for presenting non-IFRS financial information, are set forth in the Company’s Document de référence for the year ended December 31, 2010 filed with the AMF on April 1, 2011. To compensate for these limitations, the supplemental non-IFRS financial information should be read not in isolation, but only in conjunction with the Company’s consolidated financial statements prepared in accordance with IFRS.

In millions of Euros, except per share data and percentages   Six months ended June 30,   Change    
2011   Adjustment (1)   2011   2010   Adjustment (1)   2010   IFRS   Non-IFRS (2)
    IFRS       non-IFRS   IFRS       non-IFRS        
Total Revenue € 838.1 0.4 € 838.5 € 697.5 6.4 € 703.9 20% 19%
Total Revenue breakdown by activity
Software revenue 760.6 0.4 761.0 626.1 6.4 632.5 21% 20%
New Licenses 209.4 161.5 30%
Product Development 1.1 0.3
Periodic Licenses and Maintenance 550.1 0.4 550.5 464.3 6.4 470.7 18% 17%
Recurring portion of Software revenue 72% 72% 74% 74%
Services and other revenue 77.5 71.4 9%
Total Software Revenue breakdown by product line
PLM software revenue 595.1 0.4 595.5 477.2 6.4 483.6 25% 23%
of which CATIA software revenue 359.7 0.4 360.1 283.4 5.4 288.8 27% 25%
of which ENOVIA software revenue 103.9 83.8 0.9 84.7 24% 23%
Mainstream 3D software revenue 165.5 148.9 11%
Total Revenue breakdown by geography
Americas 237.1 0.1 237.2 207.9 1.1 209.0 14% 13%
Europe 375.2 0.0 375.2 314.6 1.4 316.0 19% 19%
Asia   225.8   0.3   226.1   175.0   3.9   178.9   29%   26%
Total Operating Expenses (€ 654.1) 51.9 (€ 602.2) (€ 576.0) 50.7 (€ 525.3) 14% 15%
Stock-based compensation expense (7.8) 7.8 - (11.7) 11.7 - - -
Amortization of acquired intangibles (41.8) 41.8 - (27.4) 27.4 - - -
Other operating income and expense, net   (2.3)   2.3   -   (11.6)   11.6   -   -   -
Operating Income € 184.0 52.3 € 236.3 € 121.5 57.1 € 178.6 51% 32%
Operating Margin 22.0% 28.2% 17.4% 25.4%
Financial revenue & other, net 4.4 (5.0) (0.6) 2.4 0.0 2.4 83% (125%)
Income tax expense (60.2) (17.0) (77.2) (37.4) (22.0) (59.4) 61% 30%
Net Income attributable to shareholders € 128.1 30.3 € 158.4 € 86.4 35.1 € 121.5 48% 30%
Diluted Net Income Per Share (3)   € 1.03   0.25   € 1.28   € 0.72   0.29   € 1.01   43%   27%
 

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise