Celeritive Technologies Announces VoluMill™ v4.0 with Active Chip Thickness Control (ACTC™), Non-concentric Arc Construction

CAVE CREEK, AZ – Celeritive Technologies, a developer of innovative competitive manufacturing solutions through high-speed machining technologies, announces the release of VoluMill™ v4.0. The latest version of the ultra high-performance toolpath engine includes the Active Chip Thickness Control (ACTC™) interface, which makes it easy to achieve even greater reductions in rough milling cycle time, and the new Non-Concentric Milling technology, designed to reduce tool load and improve chip clearance.

“Radial chip thinning has been a common topic of discussion over the past decade or so,” states Glenn Coleman, chief product officer of Celeritive. “It is a real phenomenon, easily defined and illustrated, but one whose benefits have proven elusive. ACTC now makes those benefits attainable by moving beyond the concept of chip thinning and giving our customers direct control over the actual chip thickness throughout their rough milling programs. This active management of chip thickness is producing reductions in cycle time up to 35% over current VoluMill toolpaths – which were already up to 5X faster than typical toolpaths.”

“We have reengineered VoluMill 4.0 from the ground-up to improve machining dynamics during arc moves,” says Dr. Evan Sherbrooke, chief technology officer of Celeritive. “Toolpaths have always contained arc moves that share the same center point and entry angle as arc moves on previous passes. Unfortunately, when the tool enters these arc moves, the tool load increases quite suddenly. Our new Non-Concentric Milling technology locates arcs at different center points, so that each successive pass begins its arc move sooner than on the previous pass. As a result, the tool load changes more gradually, and the chips evacuate more easily.”

VoluMill has proven itself time and time again as the fastest, easiest and most economical way to increase the competitiveness of machining operations. CEOs and CFOs see increases in profitability and greater return on capital assets. Sales people have found they can be much more competitive with bids. Operations Managers enjoy increased shop throughput and scheduling flexibility, plus reductions in cutting tool costs and inventory. NC Programmers benefit from the quick learning curve and ease of use. And machine operators just plain love how it sounds when cutting.

VoluMill runs as an integrated solution inside many industry-leading CAM systems. The standalone VoluMill Universal™ product, designed to work with any CAD/CAM system, is also available.

About Celeritive Technologies:

Celeritive Technologies, Inc., a leading developer of advanced technologies that enable maximum productivity from any machining hardware, is the creator of VoluMill, the patent-pending toolpath engine that integrates with the industry’s leading CAM systems. Located in Cave Creek, Arizona, Celeritive Technologies was founded by leaders in the manufacturing industry, including machinists, developers, and executives. For additional information, visit www.volumill.com.

 



Read the complete story ...


Review Article Be the first to review this article
Rand3D

SolidCAM: SolidCAM Dec 2017 Campaign Save 28 percent

Jobs
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise