Delcam acquires a 25% holding in Fabbify Software GmbH

Email Contact

Delcam, the world’s leading specialist supplier of CAM software, has acquired a 25% holding in Fabbify Software GmbH, a new, Bremen-based software development company specialising in additive manufacture.

The directors of Fabbify, Dipl.-Inf. Jaan Rudolph and Dipl.-Inf. Robert Weitzel, between them have 20 years experience developing software tools for users of additive manufacturing and performing contract development for additive machine builders. Delcam and Fabbify will work together to develop and promote solutions for the additive manufacturing market.

"We see great benefits in collaborating with established experts in this exciting area of technology,” explained Delcam’s Development Director, Steve Hobbs. "Delcam has been developing additive manufacturing solutions in a number of UK and European collaborative research projects. We believe that additive processes will increasingly be used for production parts alongside established machining techniques that are fully supported by Delcam’s CAM product range.”

"We are delighted to have Delcam as a partner in our business” says Fabbify’s Jaan Rudolph. "The combination of our experience with additive manufacture and Delcam’s established products and extensive distribution network will enable both companies to achieve far greater impact then either could by acting independently”.

Fabbify Software GmbH
Universitätsallee 5
DE-28359 Bremen
Germany

www.fabbify.com
Email Contact



Read the complete story ...


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise