NVision Scanner Helps Get Aircraft Accessories to Fit Right the First Time

NVision’s HandHeld laser scanner is being used by Lockheed Martin [NYSE: LMT] engineers at its Missiles and Fire Control business to assure the fit of accessories to aircraft exteriors and interiors is positioned perfectly the first time.

The NVision Handheld scanner is a powerful portable scanning device which is capable of capturing 3D geometry. The NVision HandHeld is attached to a mechanical arm that moves about the object, freeing the user to capture data rapidly and with a high degree of resolution.  

NVision’s HandHeld scanner has helped Lockheed Martin engineers accurately measure millions of points by simply moving it over an aircraft’s surface, enabling perfect fits on first prototype iterations. 

“The Handheld laser scanner is a perfect fit for this application because its ability to move freely around a part makes it possible to reverse engineer virtually any size or shape of part,” said Steve Kersen, President of NVision. The scanner is attached to a mechanical arm which moves about the object, freeing the user to capture data rapidly and with a high degree of resolution. An optional tripod provides complete portability in the field. Intuitive software allows full model editing, polygon reduction, and data output to all standard 3D packages.

“An important advantage of laser scanning is that it provides accurate measurements of parts ranging in scale from the entire exterior of a commercial helicopter down to very small components,” said Stephen Rocca, manager of Mechanical Laboratories at Lockheed Martin Missiles and Fire Control in Orlando, Fla. “Getting the fit correct the first time provides significant time and cost savings.  Laser scanning has also improved the accuracy of the fluid dynamic models that we use to predict the effect of the accessories on flight performance, providing a safety advantage.”

In building aircraft accessories, it’s critical to determine the exact geometry of the aircraft which normally cannot be obtained from computer aided design (CAD) models because the exact configuration varies from aircraft to aircraft. For example, aircraft interiors are populated with cables and hydraulic lines that often do not show up or show up in a different position in the CAD model. In the past, conventional measuring instruments were used to physically measure the aircraft. For example, technicians would measure the body exterior, rotor, skids, windows and doors of a commercial helicopter.

This was a very tedious process because an individual measurement had to be taken for each point. There was never enough time to take enough points to fully define the geometry so technicians frequently had to take a best guess as to the exact surface contours. The result was that the prototype often had to be reworked to get it to fit the exterior. The inherent inaccuracies of the manual measurement methods used in the past meant that three or four prototype iterations were typically required to obtain a good match to the aircraft.

After NVision demonstrated the ability to obtain high levels of accuracy in laser scanning, Lockheed Martin purchased an NVision Handheld scanner for a production site in Alabama, and later, a second scanner, for its Orlando, Fla., manufacturing facility.  

For more information, contact NVision, Inc., 440 Wrangler Dr, Suite 200, Coppell, TX 75019. Ph: 972.393.8000, Fax: 972.393.8002. E-mail: sales@nvision3d.com. Visit NVision’s Web site at http://www.nvision3d.com/.

 

About NVision

NVision, Inc. ( http://www.nvision3d.com) was established in 1990 with one goal in mind: to provide customers with the highest accuracy non-contact optical measurement systems and services for Reverse Engineering and Inspection. Focusing our expertise on the aerospace, power generation, and oil/gas industries, NVision provides both contract scanning services and systems sales to companies throughout North America.  Our elite team of engineers provides customers with an unmatchable level of experience and is able to advise and assist with the most difficult engineering challenges.

NVision’s clients include industry leaders such as Alstom, Boeing, GE, Lockheed Martin, Lear, NASA, Porsche, Raytheon, Siemens, Toyota, and every branch of the U.S. military.




Review Article Be the first to review this article
Rand3D

SolidCAM: SolidCAM Dec 2017 Campaign Save 28 percent

Featured Video
Jobs
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise