PolyWorks V12 Integrates New DirectReplay Re-Measurement Technology into its Universal 3D Metrology Platform

March 09, 2001 - InnovMetric Software is pleased to announce that the version 12 of PolyWorks incorporates the new DirectReplay technology that dramatically simplifies multi-piece inspection tasks performed with any point cloud digitizer or tactile probing device. Other metrology products traditionally offer teaching modes to automate a multi-piece inspection task. Teaching modes generally record user operations performed on a first piece in an operation history tree from which an automated inspection program is built. The program is edited by adding/removing/editing operations in the history tree. A new piece is inspected by executing the sequence of operations in the history tree. This approach works well within pre-production and production contexts where fixed inspection programs can be prepared and applied uniformly on all pieces.

There are other contexts however where CAD models, dimensional tolerances, and inspected features are frequently changed. For example, tools and assembly processes are constantly modified in the product engineering phase. Or, a part must be produced in a multiplicity of sizes and configurations. In both cases, it is highly desirable to have the ability to re-use the same inspection program with different measurement requirements without having to rebuild the whole operation sequence, or go through time-consuming editing procedures in an operation history tree.

PolyWorks V12 overcomes the limitations of existing teaching modes by introducing a new software architecture in which the operator’s intent is directly embedded in the inspection project itself, without having to rely on an operation history tree. PolyWorks V12 offers four critical benefits to those who need to inspect multiple pieces.

Self-learning parametric traceable projects

The inspection project is always in-sync with the operator. All measurement parameters are automatically recorded within measurement objects, and all report items (tables, snapshots, etc.) precisely retain the conditions in which they were created, guaranteeing a total project repeatability under all circumstances.

Adaptive learning capabilities

At any time, the operator can modify the inspection project and initiate the measurement of a new piece without having to edit an operation history tree. For example, measurement objects and reports in an existing project could first be adjusted or updated, and the modified project could then be directly used to control a new piece.

Flexible re-measurement process

While measuring a new piece using DirectReplay, operators may interrupt the re-measurement process and perform manual operations, then resume re-measurement. DirectReplay also allows customizing the measurement process and report of each piece, a very handy capability within a product engineering context where one specific piece or assembly may require further investigation.

Universal 3D metrology platform

DirectReplay is designed for the PolyWorks universal platform and handles all point cloud digitizers as well as all tactile probing devices such as articulated arms, optically tracked touch probes, laser trackers, and manual CMMs.

PolyWorks V12 is scheduled for pre-release in April 2011, and will be demonstrated at the Control trade show held in Stuttgart, Germany, on May 3-6.

About InnovMetric Software Inc.

Founded in 1994, in Québec City, Canada, with subsidiaries and distributors worldwide, InnovMetric Software Inc. develops and commercializes PolyWorks ®, a universal 3D metrology software platform that offers the flexibility of combining high-density point cloud digitizers and tactile probing devices within the same measurement task, ensuring optimal accuracy and speed under all circumstances. The world’s largest industrial manufacturing organizations that use PolyWorks every day trust it for its flexibility, its robustness, and top-of-the-class technical support.

For more information, visit www.innovmetric.com

Read the complete story ...

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
GIS Analyst for City of Elk Grove at Elk Grove, CA
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise