Nordson ASYMTEK Fluid Dispensers Jet Precisely into Narrow Cavities To Improve Side-View LED Manufacturing Process

Closed-loop control of the dispense weight eliminates constant adjustments

CARLSBAD, Calif. — (BUSINESS WIRE) — March 2, 2011Nordson ASYMTEK, a leader in dispensing, coating, and jetting technologies, introduces jet dispensing for manufacturing side-view LEDs. The system jets 0.1 to 0.2 mm dots through windows as small as 0.4 mm into the LED cavities. Side-view LEDs illuminate the displays in devices such as tablet computers, smart phones, and e-readers. Nordson ASYMTEK's Spectrum™ S-920N jetting system automatically maintains a consistent shot weight with software-managed dispense parameters. Closed-loop dispensing eliminates the need for time-consuming operator adjustment. Unlike other multi-headed needle dispensing systems, Nordson ASYMTEK’s system is easier to set up and maintain in production, keeping your process under machine control.

"Consistent dispensing weight improves process capability while ensuring higher UPH (units per hour)," said Akira Morita, business development manager at Nordson ASYMTEK. "Using CPJ+ (calibrated process jetting plus), the process variability is reduced for tight LED color quality. This patented, technologically advanced software and hardware control reduces process variation, increases yield, and reduces cost."

The system uses a jet for non-contact dispensing. Unlike a needle, the jet retracts much less for silicone break off and therefore shoots multiple shots faster, increasing speed and throughput. The jet’s small, controlled drops of fluid reach tight cavities consistently and reliably, unlike needles which have orifices larger than the cavity windows of side-view LEDs.

"As these LED devices get slimmer, the challenge to dispense specialized fluids, like silicone phosphor, into these tight spaces becomes greater," explained Morita. "Nordson ASYMTEK's dispensing system overcomes these challenges."

Visit Nordson ASYMTEK at SEMICON China booth #2437

Photo at www.nordson.com/en-us/divisions/asymtek/PublishingImages/Highres/Nordson-ASYMTEK-LED-Jetting-System.jpg

Short URL: http://bit.ly/fNxhzn

About Nordson ASYMTEK

Nordson ASYMTEK, a world leader in precision automated fluid dispensing, conformal coating, and jetting technologies, designs and manufactures a full line of dispensing and coating systems, supported by a global applications and service network. Recognized for its innovative equipment and excellent service, Nordson ASYMTEK continues to offer advanced dispensing solutions for a range of precision assembly processes. These include semiconductor packaging, printed circuit boards, LEDs, flat panel displays, medical and biotechnical devices, and solar and photovoltaic products. Nordson ASYMTEK is an ISO 9001:2008 certified company and has received numerous awards for its service excellence and product innovations. For more information, visit www.nordsonasymtek.com or www.twitter.com/NordsonASYMTEK.

About Nordson Corporation

Nordson Corporation (Nasdaq: NDSN) is one of the world’s leading producers of  precision dispensing equipment that applies adhesives, sealants, liquid and  powder coatings and other materials to a broad range of consumer and industrial products during manufacturing operations. The company also manufactures equipment used in the  testing and inspection of electronic components as well as technology-based systems for  UV curing and  surface treatmentprocesses. Headquartered in Westlake, Ohio, Nordson has direct operations and sales support offices in more than 30 countries. Visit Nordson on the web at  www.nordson.comwww.twitter.com/Nordson_Corp or Facebook.



Contact:

Nordson ASYMTEK Headquarters:
Roberta Foster-Smith, 760-431-1919
Email Contact
or
Agency Contact:
A R Marketing, Inc.
Andrea Roberts, 858-451-8666
Email Contact
or
International Offices:
Headquarters:
+1 760 431 1919
www.nordsonasymtek.com
or
China:
+86 21 3866 9166
www.nordsonasymtek.com/cn
or
Europe:
+31 43 352 4466
or
India:
+91 44 4353 9024
or
Japan:
+81 3 5762 2801
www.nordsonasymtek.com/jp
or
Korea:
+ 82 31 765 8337
www.asymtek.com/kr
or
Southeast Asia:
+65 6796 9514
or
Taiwan:
+886 2 2902 1860




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise