Senergy Group to Improve Energy Exploration with Realistic Simulation from Dassault Systèmes

U.K.’s Largest Subsurface Engineering Consultancy Selects Abaqus FEA from SIMULIA as Primary Geomechanics Analysis Solution

VÉLIZY-VILLACOUBLAY, France & PROVIDENCE, R.I. — (BUSINESS WIRE) — September 29, 2010Dassault Systèmes (DS) (Paris: DSY) (Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced that Senergy Group, a global integrated energy services company, has selected Abaqus Finite Element Analysis (FEA) software from SIMULIA, the DS brand for realistic simulation. Abaqus FEA will be the company’s primary analysis tool for geomechanics and structural stability assessments within subsurface engineering projects.

Senergy is a leading provider of global engineering services for the oil & gas and alternative energy industries. Senergy selected Abaqus FEA software from SIMULIA due to its ability to accurately predict behavior of rock formations and to capture rock-structure interaction taking into account nonlinear effects such as plasticity and compaction that are important in subsurface geological environments. Senergy is using the realistic simulation capabilities in Abaqus to analyze rock behavior in petroleum engineering projects, including simulating sand production in open- and cased-hole petroleum wells, evaluating well bore stability, estimating compaction in depleting reservoirs, and predicting loads on sand-control equipment.

“Using FEA provides us with a more sophisticated method to understand and predict realistic behavior of complex geological environments,” said Phil McCurdy, principal geomechanics engineer, Senergy. “We selected Abaqus due to its industry-proven track record and well-documented use cases. Its open architecture also gives us the potential to link reservoir geomechanics models and flow models for more precise co-simulation and multiphysics solutions.”

“Time, cost and safety are critical factors in the Energy exploration industry,” stated Ken Short, VP, Strategy and Marketing, SIMULIA, Dassault Systémes. “We work closely with our customers, such as Senergy, to gain an indepth understanding of their challenges. This enables SIMULIA to deliver robust, realistic simulation solutions that help them accelerate engineering decisions, while minimizing risk and improving profitability.”

###

About Dassault Systèmes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 115,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes applications provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing - ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. For more information, visit http://www.3ds.com.
CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.



Contact:

Dassault Systèmes Press Contacts
Tim Webb (SIMULIA)
Email Contact
+1 (401) 276-8105
or
Derek Lane (DS Americas)
Email Contact
+1 (818) 673-2243
or
Arnaud Malherbe (DS EMEA)
Email Contact
+33 (1) 61 62 87 73
or
Elena Fernandez (DS LATAM)
Email Contact
+1 (978) 442-2790




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise