Nikon Metrology to deliver the most powerful industrial microfocus CT system in North-America to Chesapeake Testing

Nikon Metrology announces that Chesapeake Testing has ordered a combined 225-450kV microfocus X-ray and computer tomography (CT) system. Chesapeake Testing primarily selected this powerful inspection system for its highly accurate 450kV source, the only microfocus X-ray source at this energy. The system’s powerful source, walk-in bay and Panel Shift capability allow Chesapeake Testing to scan large objects up to 39” wide made of dense materials such as metals, ceramics and composites. The system perfectly fits in Chesapeake Testing’s strategy to further extend the experimentation and testing services it provides to defense, aviation and automotive customers.

Chesapeake Testing in Belcamp , Maryland , USA — September 08, 2010 —, provides ballistic experimentation and testing services in support of protection systems research, certification and compliance testing. A key application Chesapeake Testing plans using the new X-ray and CT system for is performing inspection on ballistic-resistant personal body armor. “To meet our clients’ testing requirements, we needed a CT system capable of having X-rays penetrate through thick armor specimens,” says Jim Foulk, Chesapeake Testing’s President/CEO. “This is only possible using a walk-in system that incorporates a 450kV X-ray source.”

There are a number of high-power sources out there on the market, but Chesapeake Testing opted for Nikon Metrology’s proprietary 450kV microfocus source. The spot size of this x-ray source is orders of magnitude finer than competitive minifocus sources, offering users superior resolution and accuracy as well as a wider array of measurable parts. This is essential for Chesapeake Testing’s CT imaging facility that is available to partners and third parties. The facility is expected to attract an increasing number of customers, in particular companies active in automotive and aviation.

Foulk says: “Armed with the new industrial X-ray and CT system, we are able to offer our customers unmatched capabilities in non-destructive testing, 3D inspection and reverse engineering applications. Applications are diverse, ranging from inspection of small precision machine components to large ceramic and composite structures. We are already partnered with the SURVICE Metrology Center on an important Air Force research grant to use this new facility for the inspection of gas turbine engine blades.”

To support the inspection of turbine blades, the system is equipped with a proprietary curved detector that minimizes X-ray scatter. The winning combination of a powerful microfocus source and a curved detector produces unmatched accuracy, which now becomes a benchmark in North America .

The new system to be installed at Chesapeake Testing captures detailed X-ray images using a premium 16” x 16” imaging panel. Subsequently, a 3D CT volume is reconstructed that you can navigate as if you are walking through the specimen. “Following this intuitive approach, companies using our CT facility instantly trace otherwise invisible assembly errors or structural material imperfections,” explains Foulk. “The detailed insight they acquire helps them optimize their products and realize higher quality standards in less time.”

Chesapeake Testing customers are not restricted to run CT on parts up to 12” wide, as it is the case with a standard system. “Thanks to the system’s walk-in bay and Panel Shifting capability, our customers are able to take CT scans of parts up to 39 inches wide, providing over 30 times the default scan volume. In fact it is the first commercial CT system in the US that deals with specimens of this size.”


Nikon Metrology offers the broadest range of metrology solutions for applications ranging from miniature electronics to the largest aircrafts. Nikon Metrology’s innovative measuring and precision instruments contribute to a high performance design-through-manufacturing process that allows manufacturers to deliver premium quality products in a shorter time. Further information is available on


Renaat Van Cauter,
Director Marketing Communications
Nikon Metrology NV
Geldenaaksebaan 329,
B3001 Leuven, Belgium
Email Contact
Tel +32 16 74 01 00

Peggy Long
Marketing Manager
Nikon Metrology, Inc.
12701 Grand River Avenue
Brighton, MI 48116
Email Contact
Tel (810) 220-4360

Review Article Be the first to review this article
Featured Video
System Designer/Engineer for Bluewater at Southfield, Michigan
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
Montréal Manufacturing Technology Show (MMTS) 2018 at Place Bonaventure Montréal Canada - May 14 - 16, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise