Boeing Launches 787 Dreamliner Flight Training; Unveils Suite of 787 Training Devices

SEATTLE, Aug. 26 — (PRNewswire) — Boeing (NYSE: BA) Training & Flight Services has started 787 Dreamliner flight certification training following the provisional approval from the U.S. Federal Aviation Administration (FAA) for Boeing's Seattle-based 787 flight training devices. As part of flight training, pilots train on a 787 flat panel training device and a 787 full-flight simulator. Both devices are manufactured by Thales.

"The innovations of the 787 have inspired us to develop the most effective training curriculum based on our customers' training needs matched with efficient delivery and modern simulation tools," said Sherry Carbary, vice president, Flight Services, Boeing Commercial Airplanes. "With the FAA's approval on our flight training devices, we are embarking on an exciting journey toward delivering qualified and competent crews."

The provisional designation will be removed once the airplane is fully certified. Local FAA offices will approve training courses customized for individual operators and these may be based on provisional approvals prior to certification of the airplane.

"We're pleased with the progress we are making in ensuring our support products and services are ready for our customers," said Mike Fleming, 787 director of Services and Support, Boeing Commercial Airplanes. "This is an exciting time for our customers and an important achievement for the entire Boeing team as we move toward delivery of the first 787."

There are currently eight training suites at five Boeing Training & Flight Services locations around the world in Tokyo, Singapore, Shanghai, Seattle and Gatwick, U.K.

Neg. K65022, K65021

Contact:

Scott Lefeber

787 Communications

+1 425-266-5824

Email Contact

Samantha Solomon

Boeing Training & Flight Services Communications

+1 206-304-8127

Email Contact

Photos and captions are available here: http://boeing.mediaroom.com/

SOURCE Boeing

Contact:
Boeing
Scott Lefeber of 787 Communications
Phone: +1-425-266-5824
Email Contact or Samantha Solomon of Boeing Training & Flight Services Communications
Phone: +1-206-304-8127
Email Contact
Web: http://www.boeing.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise